Aftermarket variator setup on 125
Moderator: Modsquad
-
- New Member
- Posts: 45
- Joined: Sun Oct 23, 2016 10:05 am
- Year: 2011
- Color: Candy red
- Location: West suburb of Chicago
Aftermarket variator setup on 125
I installed my NCY variator, drive face and 13g rollers today!
Works good. Very peppy. Holeshots are fun! Gained maybe 2 mph so far. May need some break in time?
Works good. Very peppy. Holeshots are fun! Gained maybe 2 mph so far. May need some break in time?
- Attachments
-
- rsz_20161103_143346.jpg (330.61 KiB) Viewed 3318 times
-
- rsz_20161103_143152.jpg (171 KiB) Viewed 3318 times
-
- rsz_20161103_143142.jpg (208.78 KiB) Viewed 3318 times
- homie
- Prestige
- Posts: 6103
- Joined: Sat Sep 06, 2014 12:49 pm
- Year: 2015 PCX150
- Color: Pearl White
- Location: FloridaLand
Re: Aftermarket variator setup on 125
Great work isn't it?
If you are not satisfied order a cogged belt and I bet that PCX will leave mine in the dust. We could have a race this weekend ya know Just tell me when, I suggest we meet on Weber and US-55. Head south W.O.T. to the next off ramp.
Your non-LED PCX125 newly installed NCY kit with a used belt vs
my LED PCX150 used NCY kit and a newly installed cogged belt.
And the people here can place bets on who gets to the off ramp first.
WOOT! LETS RACE!!!!!!
If you are not satisfied order a cogged belt and I bet that PCX will leave mine in the dust. We could have a race this weekend ya know Just tell me when, I suggest we meet on Weber and US-55. Head south W.O.T. to the next off ramp.
Your non-LED PCX125 newly installed NCY kit with a used belt vs
my LED PCX150 used NCY kit and a newly installed cogged belt.
And the people here can place bets on who gets to the off ramp first.
WOOT! LETS RACE!!!!!!
- Attachments
-
- cheer.jpg (16.39 KiB) Viewed 3311 times
-
- New Member
- Posts: 45
- Joined: Sun Oct 23, 2016 10:05 am
- Year: 2011
- Color: Candy red
- Location: West suburb of Chicago
Re: Aftermarket variator setup on 125
Hey Homie, What does the cogged belt do? I have seen your videos ( nice work btw!).
We could have a race sometime. That area of Weber road and 55 is kind of a pain to get to for me though. I am in Wheaton.
Thanks
Tom
We could have a race sometime. That area of Weber road and 55 is kind of a pain to get to for me though. I am in Wheaton.
Thanks
Tom
- Attachments
-
- images.jpg (11.01 KiB) Viewed 3288 times
- Mel46
- Forum Benefactor
- Posts: 6959
- Joined: Tue Nov 13, 2012 5:13 pm
- Year: 2013
- Color: red PCX
- Location: Dallas, Ga USA
Re: Aftermarket variator setup on 125
You updated everything except the belt, so how many miles were on that Belt? If it had more than 3,000 miles it will start losing speed from wear. You should have changed both the variator set and the belt if you had any miles on that belt. The clogged belt is a new innovation on the market. I think Homie had ordered one and was going to give us a report on it. Maybe I missed the report.
Currently own:
Red 2013 Honda PCX150
Givi tall windshield & tailbox - Lots of extra lights
Custom seat from Thailand - Bad Boy Airhorn
Takegawa Lowering Shocks - Michelin City Grip Tires
Headlight assy upgraded to LEDs w/HS5 main bulbs
NCY variator, drive face, and rollers
Red 2013 Honda PCX150
Givi tall windshield & tailbox - Lots of extra lights
Custom seat from Thailand - Bad Boy Airhorn
Takegawa Lowering Shocks - Michelin City Grip Tires
Headlight assy upgraded to LEDs w/HS5 main bulbs
NCY variator, drive face, and rollers
- homie
- Prestige
- Posts: 6103
- Joined: Sat Sep 06, 2014 12:49 pm
- Year: 2015 PCX150
- Color: Pearl White
- Location: FloridaLand
Re: Aftermarket variator setup on 125
Roosevelt to Butterfield on 355 works too. Toll gate never registers my transponder but if your plates are properly listed on I-pass website they credit you from the picture and I haven't been ticketed yetTipover wrote:Hey Homie, What does the cogged belt do? I have seen your videos ( nice work btw!).
We could have a race sometime. That area of Weber road and 55 is kind of a pain to get to for me though. I am in Wheaton.
The new belt is slowing me down right now, guess it needs to break in. You have the faster drive train over all with a 2011 but 125cc vs 2015/150 will be interesting. I had great down hill top end with 4k on my old cogged belt but we will be on the flats... so real world PCX speed ma man
The belt probably last longer because more flexible, other than that I can't say about cogged belts performance improvement over standard. I never rode on the original Honda belts, much to my surprise my PCX came with a cogged belt.
125 vs 150 but I have oversized rubber so you have that advantage over me as well It should be a real horse race Tom. Lets do it soon! Wait you are screwed with that sail on the front unless we have a 50mph tail wind which I probably still beat you.
-
- New Member
- Posts: 45
- Joined: Sun Oct 23, 2016 10:05 am
- Year: 2011
- Color: Candy red
- Location: West suburb of Chicago
Re: Aftermarket variator setup on 125
My bike/belt has just over 1050 miles on it. It probably is stretched out a little bit.Mel46 wrote:You updated everything except the belt, so how many miles were on that Belt? If it had more than 3,000 miles it will start losing speed from wear. You should have changed both the variator set and the belt if you had any miles on that belt. The clogged belt is a new innovation on the market. I think Homie had ordered one and was going to give us a report on it. Maybe I missed the report.
-
- New Member
- Posts: 45
- Joined: Sun Oct 23, 2016 10:05 am
- Year: 2011
- Color: Candy red
- Location: West suburb of Chicago
Re: Aftermarket variator setup on 125
My acceleration seems pretty good now with the new variator, but my top end seems the same as it was. I am sure you will probably smoke me.homie wrote: Roosevelt to Butterfield on 355 works too. Toll gate never registers my transponder but if your plates are properly listed on I-pass website they credit you from the picture and I haven't been ticketed yet
The new belt is slowing me down right now, guess it needs to break in. You have the faster drive train over all with a 2011 but 125cc vs 2015/150 will be interesting. I had great down hill top end with 4k on my old cogged belt but we will be on the flats... so real world PCX speed ma man
The belt probably last longer because more flexible, other than that I can't say about cogged belts performance improvement over standard. I never rode on the original Honda belts, much to my surprise my PCX came with a cogged belt.
125 vs 150 but I have oversized rubber so you have that advantage over me as well It should be a real horse race Tom. Lets do it soon! Wait you are screwed with that sail on the front unless we have a 50mph tail wind which I probably still beat you.
Last edited by Tipover on Fri Nov 04, 2016 10:07 am, edited 1 time in total.
-
- New Member
- Posts: 45
- Joined: Sun Oct 23, 2016 10:05 am
- Year: 2011
- Color: Candy red
- Location: West suburb of Chicago
Re: Aftermarket variator setup on 125
Double post, sorry.
- homie
- Prestige
- Posts: 6103
- Joined: Sat Sep 06, 2014 12:49 pm
- Year: 2015 PCX150
- Color: Pearl White
- Location: FloridaLand
Re: Aftermarket variator setup on 125
No need to think that 2011 won't haul ass for a scooter. The Ruckus crowd call PCX a drug and wish they had 70mph top end. In 2015 Honda slowed them down by removing a tooth somewhere and you have the faster PCX as stock. Your new NCY kit will break in and you should see increasing speeds, your stock tires are perfect for 4mph over me and my tires. Your displacement is lacking but I don't see how that effects top speed (maybe someone corrects me). I thinks it's your windscreen that gives me the checkered flag todayTipover wrote:
-
- New Member
- Posts: 45
- Joined: Sun Oct 23, 2016 10:05 am
- Year: 2011
- Color: Candy red
- Location: West suburb of Chicago
Re: Aftermarket variator setup on 125
I just went for a ride around the block. I saw 65 indicated on a level road with a full tuck behind the windscreen!
Surprised me.
Surprised me.
- Attachments
-
- rsz_20161104_112514.jpg (309.92 KiB) Viewed 3262 times
- homie
- Prestige
- Posts: 6103
- Joined: Sat Sep 06, 2014 12:49 pm
- Year: 2015 PCX150
- Color: Pearl White
- Location: FloridaLand
Re: Aftermarket variator setup on 125
Just blew passed you out to North ave. Back to 75th averaging 85mph and people still passing me. But I was on a Buell We need to take the Honda's out and let em rip in the slow lane and then get off and away from those nuts doing 95. You don't plan to were that hat out there do you?
- homie
- Prestige
- Posts: 6103
- Joined: Sat Sep 06, 2014 12:49 pm
- Year: 2015 PCX150
- Color: Pearl White
- Location: FloridaLand
Re: Aftermarket variator setup on 125
Install the 'letgo' app search Honda jacket... if you are big enough to wear that it matches your cap Looks like a good buy if its leather.
-
- New Member
- Posts: 45
- Joined: Sun Oct 23, 2016 10:05 am
- Year: 2011
- Color: Candy red
- Location: West suburb of Chicago
Re: Aftermarket variator setup on 125
No, I wear my very old HJC CL-12. I have a new HJC CL-17 on order at Dupage Honda.homie wrote:Just blew passed you out to North ave. Back to 75th averaging 85mph and people still passing me. But I was on a Buell We need to take the Honda's out and let em rip in the slow lane and then get off and away from those nuts doing 95. You don't plan to were that hat out there do you?
I did see 67 mph indicated on a slight downhill run yesterday. I probably had a tailwind too.
Maybe I will have to look into taking out the snorkel in the air box next.
- Mel46
- Forum Benefactor
- Posts: 6959
- Joined: Tue Nov 13, 2012 5:13 pm
- Year: 2013
- Color: red PCX
- Location: Dallas, Ga USA
Re: Aftermarket variator setup on 125
Give your new setup time to seat. I believe that it is just now starting to like the new setup. When I changed out ours it didn't have any improvement or a few days, and suddenly it just wanted to run....and it ran quite well then.
Currently own:
Red 2013 Honda PCX150
Givi tall windshield & tailbox - Lots of extra lights
Custom seat from Thailand - Bad Boy Airhorn
Takegawa Lowering Shocks - Michelin City Grip Tires
Headlight assy upgraded to LEDs w/HS5 main bulbs
NCY variator, drive face, and rollers
Red 2013 Honda PCX150
Givi tall windshield & tailbox - Lots of extra lights
Custom seat from Thailand - Bad Boy Airhorn
Takegawa Lowering Shocks - Michelin City Grip Tires
Headlight assy upgraded to LEDs w/HS5 main bulbs
NCY variator, drive face, and rollers
-
- New Member
- Posts: 45
- Joined: Sun Oct 23, 2016 10:05 am
- Year: 2011
- Color: Candy red
- Location: West suburb of Chicago
Re: Aftermarket variator setup on 125
Hi Mel, yes, I think it did need a few days for my belt to run in to the new components.Mel46 wrote:Give your new setup time to seat. I believe that it is just now starting to like the new setup. When I changed out ours it didn't have any improvement or a few days, and suddenly it just wanted to run....and it ran quite well then.
Thanks!
Tom
- 87112
- Regular User
- Posts: 397
- Joined: Sun Sep 18, 2016 7:29 pm
- Color: 15 Forza
- Location: Seattle/ El Paso
Re: Aftermarket variator setup on 125
How much did the parts cost? I love my bike to bits just an extra little is all i ask.
-
- New Member
- Posts: 45
- Joined: Sun Oct 23, 2016 10:05 am
- Year: 2011
- Color: Candy red
- Location: West suburb of Chicago
Re: Aftermarket variator setup on 125
I purchased from Corsport. Total was 110 dollars. Plus, I had to buy a 22mm socket from the store. I borrowed a friend's electric impact wrench to do the job.87112 wrote:How much did the parts cost? I love my bike to bits just an extra little is all i ask.
Do it! You will like it!
- homie
- Prestige
- Posts: 6103
- Joined: Sat Sep 06, 2014 12:49 pm
- Year: 2015 PCX150
- Color: Pearl White
- Location: FloridaLand
Re: Aftermarket variator setup on 125
Be sure to use the 13gram rollers with that kit. We have tried others and 13 is the ticket. Impact wrenches are not costly at all, I think mine is from harbor freight. You can use it for removing the nut but not to tighten, you need a torque wrench to do that so factor another 100.00 for a couple cheap wrenches if you can't barrow.87112 wrote:How much did the parts cost? I love my bike to bits just an extra little is all i ask.
http://www.corsportusa.com/2010-honda-p ... on-pulley/
http://www.corsportusa.com/2010-honda-p ... rive-face/
http://www.corsportusa.com/2010-honda-p ... ights-13g/
Pay no attention to the 125cc or year... it's the same kit, but you should check for updates anyway from this supplier.
-
- Forum Benefactor
- Posts: 81
- Joined: Sun Feb 25, 2018 4:14 pm
- Year: 2013
- Color: Red
- Location: Lexington South Carolina
Re: Aftermarket variator setup on 125
About cogged belts: they were developed more for commercial hvac air handlers. Why ?
They discovered that one, they run cooler, and two, they save a little energy. So their life is a little longer.
They discovered that one, they run cooler, and two, they save a little energy. So their life is a little longer.
- Mel46
- Forum Benefactor
- Posts: 6959
- Joined: Tue Nov 13, 2012 5:13 pm
- Year: 2013
- Color: red PCX
- Location: Dallas, Ga USA
Re: Aftermarket variator setup on 125
Well, I don't have a cogged belt (except for the cogs on the inside, of course) and my bike runs quite well, so if your belt is not too old, run with it. You will be fine.
I have the 2013 model, which is 153cc but I run with the tall windshield and it still does well. When you hear others talk about your windshield as a sail, keep in mind that it also works well to divert wind instead of it hitting you directly in the chest, so you do pick up some speed... and comfort when riding.
If you wanted to make a "rocket" out of your little 125cc, you could buy and install a big bore kit, but it is a bit of work. Our founder, Maddiedog, did that with his first PCX and it was a real speed demon. He has a "How-to" on here somewhere.
I have the 2013 model, which is 153cc but I run with the tall windshield and it still does well. When you hear others talk about your windshield as a sail, keep in mind that it also works well to divert wind instead of it hitting you directly in the chest, so you do pick up some speed... and comfort when riding.
If you wanted to make a "rocket" out of your little 125cc, you could buy and install a big bore kit, but it is a bit of work. Our founder, Maddiedog, did that with his first PCX and it was a real speed demon. He has a "How-to" on here somewhere.
Currently own:
Red 2013 Honda PCX150
Givi tall windshield & tailbox - Lots of extra lights
Custom seat from Thailand - Bad Boy Airhorn
Takegawa Lowering Shocks - Michelin City Grip Tires
Headlight assy upgraded to LEDs w/HS5 main bulbs
NCY variator, drive face, and rollers
Red 2013 Honda PCX150
Givi tall windshield & tailbox - Lots of extra lights
Custom seat from Thailand - Bad Boy Airhorn
Takegawa Lowering Shocks - Michelin City Grip Tires
Headlight assy upgraded to LEDs w/HS5 main bulbs
NCY variator, drive face, and rollers