I have a pcx150 !!! I keep braking belts : any ideas on how to fix that problem?
Have malossi vareator with ncy drive face!
braking belts
Moderator: Modsquad
-
- Forum Benefactor
- Posts: 255
- Joined: Sat Jul 04, 2015 4:59 pm
- Year: 2013
- Color: red
- Location: Michigan
Re: braking belts
Gonna need more info than that. What belt, miles on the bike, mileage between belt breakage, etc.
With what you put up so far, I recommend putting the stock parts in and calling it well enough.
With what you put up so far, I recommend putting the stock parts in and calling it well enough.
Re: braking belts
What belts are you using?troy wrote:I have a pcx150 !!! I keep braking belts : any ideas on how to fix that problem?
Have malossi vareator with ncy drive face!
All aftermarket ones are of inferior quality to the standard one.
The guaranteed cure to the problem is to refit all the standard parts.
Four decades on two wheels has taught me nothing, all advice given is guaranteed to be wrong
- Alibally
- Official Moderator
- Posts: 1761
- Joined: Thu Nov 03, 2011 5:47 pm
- Year: 2019
- Color: Black
- Location: Edinburgh, Scotland
Re: braking belts
It's probably an incompatible mixture of parts or the incorrect parts for the bike.
There are plenty of theads on here as to what works and what doesn't.
There are plenty of theads on here as to what works and what doesn't.
- you you
- What's a wot?
- Posts: 10000
- Joined: Sat Jun 30, 2012 5:37 pm
- Location: Between Lulu and Chichi
Re: braking belts
Alibally wrote:It's probably an incompatible mixture of parts or the incorrect parts for the bike.
There are plenty of theads on here as to what works and what doesn't.
Something works?
- Alibally
- Official Moderator
- Posts: 1761
- Joined: Thu Nov 03, 2011 5:47 pm
- Year: 2019
- Color: Black
- Location: Edinburgh, Scotland
Re: braking belts
Allegedlyyou you wrote:Alibally wrote:It's probably an incompatible mixture of parts or the incorrect parts for the bike.
There are plenty of theads on here as to what works and what doesn't.
Something works?
- sendler2112
- Forum Benefactor
- Posts: 1412
- Joined: Thu Jul 26, 2012 3:27 pm
- Year: 2013 PCX150
- Location: Syracuse, NY, USA 13045
Re: braking belts
Your mix n match pulleys are probably causing out of alignment. Run it on the stand with the cover off to see if the belt looks crooked.
Re: braking belts
If using a Malossi belt, they are wider so get pushed further out. With NYC 120mm pulley half you may be rubbing the belt on the casing?
- sendler2112
- Forum Benefactor
- Posts: 1412
- Joined: Thu Jul 26, 2012 3:27 pm
- Year: 2013 PCX150
- Location: Syracuse, NY, USA 13045
Re: braking belts
If the belt is pushed out too far, it will also be hanging half off the pully. Run it on the stand with the cover off to see.