Throttle body neck

Urbanfreestyle · Post by **Urbanfreestyle** » Wed Jul 02, 2014 1:44 am

Wow! Thanks for the info! Do you have any pictures?

Mgalutia88 · Post by **Mgalutia88** » Wed Jul 02, 2014 9:41 am

I'll try and get some posted today. I'm riding instead of driving so I'll take some pictures after class.

Urbanfreestyle · Post by **Urbanfreestyle** » Wed Jul 02, 2014 10:10 am

Awesome! thanks! In the mean time i'm looking at getting a stubby backbox, cutting the original one off and clamping the new one on!

Mgalutia88 · Post by **Mgalutia88** » Thu Jul 03, 2014 6:49 am

Here is the back side of the airbox and the washers I used on the airbox as spacers to clear the rear tire.

Urbanfreestyle · Post by **Urbanfreestyle** » Thu Jul 03, 2014 7:00 am

Awesome! thanks for that! how does it sound?

Mgalutia88 · Post by **Mgalutia88** » Fri Jul 04, 2014 5:10 am

its a louder growl as opposed to stock and you get a harmonic vibration from 5700-6300 rpm!

Urbanfreestyle · Post by **Urbanfreestyle** » Fri Jul 04, 2014 7:40 am

What's a Harmonic Vibration? lol

Mgalutia88 · Post by **Mgalutia88** » Fri Jul 04, 2014 12:15 pm

At a certain frequency there is a vibration.

Alibally · Post by **Alibally** » Fri Jul 04, 2014 12:45 pm

Fit a harmonic vibration damper then.
Here is one attached to an exhaust.

you you · Post by **you you** » Fri Jul 04, 2014 4:39 pm

Alibally wrote:Fit a harmonic vibration damper then.
Here is one attached to an exhaust.

Harmonic vibration damper = weight

I want a space harmonic vibration damper!!

Or a low calory one

Or maybe just a weight....

Mgalutia88 · Post by **Mgalutia88** » Sat Jul 05, 2014 12:24 am

Good idea. I'll have to think on that one a bit.

Urbanfreestyle · Post by **Urbanfreestyle** » Tue Aug 19, 2014 3:15 am

SO i tried to fit it but i didn't go as planned, (the pipe is at the wrong angle

can anyone help with this?

homey · Post by **homey** » Wed Aug 27, 2014 2:18 pm

This is hands down funniest read, ripe with sexual overtones, lost it at the peanut part ROFL, still laughing too funny... FAIL! un-install forum

Mgalutia88 · Post by **Mgalutia88** » Wed Aug 27, 2014 4:04 pm

Cut a few slices the width of your saw blade in the pipe an bend it over then take it to an exhaust shop to weld it up.

homey · Post by **homey** » Wed Aug 27, 2014 6:29 pm

Mgalutia88 wrote:Cut a few slices the width of your saw blade in the pipe an bend it over then take it to an exhaust shop to weld it up.

there was box vibration but the pipe didn't fit so I had to put a bend on it, you boys need to get a wife

The Honda PCX / Forza / ADV150 / SH Forums