I just got my hands on a PCX service manual yesterday There is nothing about wheel balancing in the service manual. I only found words on checking the trueness of the wheels. My dealer says they won't balance my wheel if I replace my tyres with them. Other places say they normally don't do it for scooters but can do it if I so insist. Some for free, some for an additional fee.
Almost all the tools and parts I ordered have arrived to allow me to replace my tyres myself properly. My balancing stand is still on its way, but I got wheel weights probably enough for balancing wheels of 2 dozen bikes. Anyway, the dimensions of the weights seem to fit ok with both front and rear wheels of my PCX. My gold wheels definitely look better without any silver weights on them tho.
My question:
Is wheel balancing instruction present in any other two-wheelers' service manual?
Wheel balancing in the service manual
Moderator: Modsquad
Re: Wheel balancing in the service manual
No.....
Fish
Fish
- easyrider
- Frequent Poster
- Posts: 1597
- Joined: Sat Dec 19, 2015 6:23 pm
- Year: 2013
- Color: blk
- Location: Long Island , NY, Tampa, Ft laud
Re: Wheel balancing in the service manual
Do you think you need to??
-
- Frequent Poster
- Posts: 1830
- Joined: Wed Jun 10, 2015 4:30 pm
- Year: 18 300 xmax
- Color: White
- Location: Fort lauderdale
- Contact:
Re: Wheel balancing in the service manual
Glen
‘15 PCX build thread here:
https://www.hondapcx.org/viewtopic.php?f=2&t=4640
Current: ‘18 XMAX 300 & ‘22 NAVI
‘15 PCX build thread here:
https://www.hondapcx.org/viewtopic.php?f=2&t=4640
Current: ‘18 XMAX 300 & ‘22 NAVI
- raito
- Regular User
- Posts: 153
- Joined: Tue Mar 01, 2016 8:58 am
- Year: 2015
- Color: matte silver
- Location: Brunei
Re: Wheel balancing in the service manual
I would expect a sportbike service manual to contain advice about wheel balancing. Not detailed instruction on how but a statement that it should be done.fish wrote:No.....
Fish
Yea, most probably no need for PCX, but I wanted to..easyrider wrote:Do you think you need to??
Somehow I prefer wheel weights. Also not sure if I can get those or similar where I am.
- you you
- What's a wot?
- Posts: 10000
- Joined: Sat Jun 30, 2012 5:37 pm
- Location: Between Lulu and Chichi
Re: Wheel balancing in the service manual
Does it need to be done?
I’ve never balanced a scooter wheel ever and I don’t balance the rear on motorbikes.
What I do do is make sure the marked lightest part of the tyre is adjacent to the valve.
I’ve never balanced a scooter wheel ever and I don’t balance the rear on motorbikes.
What I do do is make sure the marked lightest part of the tyre is adjacent to the valve.
-
- Forum Benefactor
- Posts: 2479
- Joined: Fri Aug 03, 2018 8:09 am
- Location: USA
Re: Wheel balancing in the service manual
The only thing about the tire beads is that the next guy who changes the tire is going to have to deal with them spilling all over the place if they aren't careful. They do work though. . ..
Here's a vid if you choose to use tire beads. You'll just have to cut a hole in the tire when you go to replace it to catch the beads more easily.
I used to change my own motorcycle tires the "old fashion" way but got tired of that quick and have since just brought the tires/tubes (if needed) and/or wheels to motorcycle dealers and pay for them to do the replacement. More recently though I've just been ordering the tires through the dealership and when they come in they notify me and I pull the wheel(s) off the bike and bring them in. Quite often they are able to do the mounting while I wait if they aren't busy. Some dealerships will only replace tires if you buy them there because they don't want to be responsible for mounting low quality or improper or used tires.
Here's a vid on balancing tires.
and another one.
Here's a vid if you choose to use tire beads. You'll just have to cut a hole in the tire when you go to replace it to catch the beads more easily.
I used to change my own motorcycle tires the "old fashion" way but got tired of that quick and have since just brought the tires/tubes (if needed) and/or wheels to motorcycle dealers and pay for them to do the replacement. More recently though I've just been ordering the tires through the dealership and when they come in they notify me and I pull the wheel(s) off the bike and bring them in. Quite often they are able to do the mounting while I wait if they aren't busy. Some dealerships will only replace tires if you buy them there because they don't want to be responsible for mounting low quality or improper or used tires.
Here's a vid on balancing tires.
and another one.