The Honda PCX / Forza / ADV150 / SH Forums

can some one help.? i need diagram for this.
i need to connect it bluetooth obd2 so that i can see the rpm and tune the variators



thank you!

Welcome
Have you seen this thread? viewtopic.php?f=9&t=8991

Ok, I see you have. Wait a bit, Good luck

WhiteNoise wrote:Welcome
Have you seen this thread? viewtopic.php?f=9&t=8991

yes i have seen that. but i cant buy the connector here in my place or order it online.. i just need the diagram so i can DIY it

Maybe a silly question but have you searched online for a diagram?

I typed this into my google search bar:

1) obd2 port 4 pin to 16 pin wiring diagram for bluetooth adaptor Elm327
2) Need wiring diagram for bluetooth adaptor Elm327 to obd2 port 4 pin to 16 pin

When the pages came up, I immediately clicked on the "image tab" (at the top of the page).
Boom! Lots of illustrations/diagrams appeared.
Is that what You Need? Hmm, I'm Not sure, but maybe they'll serve as a pathway .

Tweak my search wording (to your liking), you may find the answer to your question(s).

Keep us posted. I wish you luck

I'm now just getting this. (Guessin' I've Poor reading skills this afternoon, sorry)
You haven't any parts. You want to create and need a master plan/diagram to make it happen.
Wow, I was confused Probably still am.
Alrighty then, I'm outta here!

We'll wait for our knowledgable members to come along.
(To members, Is it Me? )

done. i've got it already and its working !

That's Great kev! How's that working for ya? What did you do? What diagram did you find/use? Your input here could be very useful to someone needing the same. And of course, adding links and photos are a big +
Congrats!

WhiteNoise wrote:That's Great kev! How's that working for ya? What did you do? What diagram did you find/use? Your input here could be very useful to someone needing the same. And of course, adding links and photos are a big +
Congrats!

Got to admit I’d be interested.

i just want to see the engines status when at full throttle and the ignition timing if I change octanes. here is the video

before at full throttle it was open only at 87% then i adjust the throttle linkage and bent something and now it is 93.7% at full throttle

https://drive.google.com/file/d/13P9qBG ... sp=sharing

How about the final draft of your schematic, kevkev?
We ALL want to know...

I just got adapter from Webike Japan made by Kitaco but still waiting for Bluetooth scanner. BTW how do I take the cover off the 4-pin port on the bike? I can't seem to find the tabs to unhook..

raito wrote:BTW how do I take the cover off the 4-pin port on the bike? I can't seem to find the tabs to unhook..

Nevermind this, I figured it out

kevkev45 wrote:can some one help.? i need diagram for this.
i need to connect it bluetooth obd2 so that i can see the rpm and tune the variators



thank you!

Hi all, new here with some issue in mine and the same problem...Could you please share the diagram KevKev? Thanks!

hi. is this what you want?


https://ibb.co/1dJSxNk

I have the Same Kitaco adaptor and the same bluetooth OBDII scanner which does not work at all.

BRM2, Have you attempted to repin the 16 to the 4 corners like the diagram shows?

I didn't try it. Should work.

Hello, I have tried to make an adapter with the diagram in the attached photograph for conelit and I have not had results. Are you sure that the arrangement of the cables is correct?

thanks a lot

Conelite wrote:I have the Same Kitaco adaptor and the same bluetooth OBDII scanner which does not work at all.

BRM2, Have you attempted to repin the 16 to the 4 corners like the diagram shows?

obd2.png

hello conelite,

I have checked your diagram and have had no luck. Are you sure the diagram is correct? I have also found the following diagram that looks very different from the kitaco adapter.

[img]https://kds-online.de/images/product_im ... 0x0780.jpg[/img]

The issue seems to revolve around pin 9 of the OBD connector as the other 3 are common standards - pin 9 is one of the model specific ones.