How-To: Install a windshield
Moderator: Modsquad
- maddiedog
- Benevolent Overlord
- Posts: 3640
- Joined: Tue Nov 01, 2011 7:04 pm
- Year: 2011
- Color: White
- Location: New Mexico
- Contact:
Re: How-To: Install a windshield
txwomyn, have you considered just adding hand guards like these?
http://www.amazon.com/mn/search/ref=sr_ ... 1321287847
I might be ordering these specifically: http://www.amazon.com/Universal-Motocro ... 53&sr=1-20
The huge windshield I have doesn't even keep all the wind off my hands, so I might order some of these myself.
http://www.amazon.com/mn/search/ref=sr_ ... 1321287847
I might be ordering these specifically: http://www.amazon.com/Universal-Motocro ... 53&sr=1-20
The huge windshield I have doesn't even keep all the wind off my hands, so I might order some of these myself.
Currently ride: 2011 Honda PCX 125 - Upgraded windshield and seat, keeping this one mostly stock
Previously rides: 2005 V-Strom DL650, 1974 Vespa Ciao, 2011 Honda PCX 170 (tons of mods - takegawa 170cc big bore kit, gears, etc), 1996 Honda Nighthawk 250, 1987 Honda Spree, 2000 KTM 125SX, 2003 Honda Silverwing, 2007 Genuine Buddy 125, 1998 Honda PC800, 2008 Buddy 125 (white), 2008 Buddy 125 (red), 2001 Honda Reflex, 1987 Honda Elite, 1988 Honda Spree, 2007 Yamaha Vino, 2007 Honda Metro, 2x 125cc pure-chinesium dirt bikes
Previously rides: 2005 V-Strom DL650, 1974 Vespa Ciao, 2011 Honda PCX 170 (tons of mods - takegawa 170cc big bore kit, gears, etc), 1996 Honda Nighthawk 250, 1987 Honda Spree, 2000 KTM 125SX, 2003 Honda Silverwing, 2007 Genuine Buddy 125, 1998 Honda PC800, 2008 Buddy 125 (white), 2008 Buddy 125 (red), 2001 Honda Reflex, 1987 Honda Elite, 1988 Honda Spree, 2007 Yamaha Vino, 2007 Honda Metro, 2x 125cc pure-chinesium dirt bikes
Re: How-To: Install a windshield
Thanx for this post, installed a short givi today in less than ten minute's, without it i would have taken all day trying
to get the plastic panel off without breaking it. Once again thank you.
to get the plastic panel off without breaking it. Once again thank you.
- maddiedog
- Benevolent Overlord
- Posts: 3640
- Joined: Tue Nov 01, 2011 7:04 pm
- Year: 2011
- Color: White
- Location: New Mexico
- Contact:
Re: How-To: Install a windshield
No worries, glad to be helpful.
Currently ride: 2011 Honda PCX 125 - Upgraded windshield and seat, keeping this one mostly stock
Previously rides: 2005 V-Strom DL650, 1974 Vespa Ciao, 2011 Honda PCX 170 (tons of mods - takegawa 170cc big bore kit, gears, etc), 1996 Honda Nighthawk 250, 1987 Honda Spree, 2000 KTM 125SX, 2003 Honda Silverwing, 2007 Genuine Buddy 125, 1998 Honda PC800, 2008 Buddy 125 (white), 2008 Buddy 125 (red), 2001 Honda Reflex, 1987 Honda Elite, 1988 Honda Spree, 2007 Yamaha Vino, 2007 Honda Metro, 2x 125cc pure-chinesium dirt bikes
Previously rides: 2005 V-Strom DL650, 1974 Vespa Ciao, 2011 Honda PCX 170 (tons of mods - takegawa 170cc big bore kit, gears, etc), 1996 Honda Nighthawk 250, 1987 Honda Spree, 2000 KTM 125SX, 2003 Honda Silverwing, 2007 Genuine Buddy 125, 1998 Honda PC800, 2008 Buddy 125 (white), 2008 Buddy 125 (red), 2001 Honda Reflex, 1987 Honda Elite, 1988 Honda Spree, 2007 Yamaha Vino, 2007 Honda Metro, 2x 125cc pure-chinesium dirt bikes
Re: How-To: Install a windshield
Our new Givi windscreen (the short one) is a huge improvement and I can't imagine keeping the OEM version! The wind still hits my shoulders and helmet, but I no longer feel like I'm fighting to keep my hands on the bars. I'd have to say that it isn't much help for cold hands however. Maddiedog- have you seen any images of the hand guards installed on a motorcycle/scooter? I was out in 38 degrees today and it wasn't bad, but I'd definitely be interested if they would provide an inexpensive solution. If they look cool, that would be a bonus.
2011 Honda PCX, 2007 Suzuki Burgman 400
2 Honda Civics, 5 bicycles and 1 more on order
2 Honda Civics, 5 bicycles and 1 more on order
Re: How-To: Install a windshield
I'm going to buy muffs, something like these: http://www.amazon.co.uk/2010-Oxford-Han ... B000R57XE4rainburg wrote:Our new Givi windscreen (the short one) is a huge improvement and I can't imagine keeping the OEM version! The wind still hits my shoulders and helmet, but I no longer feel like I'm fighting to keep my hands on the bars. I'd have to say that it isn't much help for cold hands however. Maddiedog- have you seen any images of the hand guards installed on a motorcycle/scooter? I was out in 38 degrees today and it wasn't bad, but I'd definitely be interested if they would provide an inexpensive solution. If they look cool, that would be a bonus.
Hand guards look a lot cooler, but whether they'll keep your hands out of the blast is a gamble. Heated gloves are awesome apparently, but expensive. Heated grips work well for shorter trips, but on longer trips your finger tips freeze anyway.
So far, the only options that I've heard will keep your hands warm in all conditions are muffs like these, and heated clothing/gloves.
Re: How-To: Install a windshield
I had tried the Oxford muffs they used to do before. They just got in the way and i felt they were plain dangerous. At least you can return things easily to Amazon if you dont like em
- maddiedog
- Benevolent Overlord
- Posts: 3640
- Joined: Tue Nov 01, 2011 7:04 pm
- Year: 2011
- Color: White
- Location: New Mexico
- Contact:
Re: How-To: Install a windshield
I haven't seen any hand guards installed on the scooter before, but I'm sure they will look good.
If you wait a couple of weeks, I should have some on my scooter.
I also might use heated grips over my stock grips, as me and EddieC were discussing in this thread: http://hondapcx.org/viewtopic.php?f=8&t=30
If you wait a couple of weeks, I should have some on my scooter.
I also might use heated grips over my stock grips, as me and EddieC were discussing in this thread: http://hondapcx.org/viewtopic.php?f=8&t=30
Currently ride: 2011 Honda PCX 125 - Upgraded windshield and seat, keeping this one mostly stock
Previously rides: 2005 V-Strom DL650, 1974 Vespa Ciao, 2011 Honda PCX 170 (tons of mods - takegawa 170cc big bore kit, gears, etc), 1996 Honda Nighthawk 250, 1987 Honda Spree, 2000 KTM 125SX, 2003 Honda Silverwing, 2007 Genuine Buddy 125, 1998 Honda PC800, 2008 Buddy 125 (white), 2008 Buddy 125 (red), 2001 Honda Reflex, 1987 Honda Elite, 1988 Honda Spree, 2007 Yamaha Vino, 2007 Honda Metro, 2x 125cc pure-chinesium dirt bikes
Previously rides: 2005 V-Strom DL650, 1974 Vespa Ciao, 2011 Honda PCX 170 (tons of mods - takegawa 170cc big bore kit, gears, etc), 1996 Honda Nighthawk 250, 1987 Honda Spree, 2000 KTM 125SX, 2003 Honda Silverwing, 2007 Genuine Buddy 125, 1998 Honda PC800, 2008 Buddy 125 (white), 2008 Buddy 125 (red), 2001 Honda Reflex, 1987 Honda Elite, 1988 Honda Spree, 2007 Yamaha Vino, 2007 Honda Metro, 2x 125cc pure-chinesium dirt bikes
Re: How-To: Install a windshield
Sorry but this windshield kills the entire look of the bike !!!!!!!!
- maddiedog
- Benevolent Overlord
- Posts: 3640
- Joined: Tue Nov 01, 2011 7:04 pm
- Year: 2011
- Color: White
- Location: New Mexico
- Contact:
Re: How-To: Install a windshield
I agree, it looks like something off of a snowmobile!
I mounted it for function more than looks, and it functions great. I may buy a smaller one eventually, but I haven't seen another that I liked enough to do the switch yet.
I mounted it for function more than looks, and it functions great. I may buy a smaller one eventually, but I haven't seen another that I liked enough to do the switch yet.
Currently ride: 2011 Honda PCX 125 - Upgraded windshield and seat, keeping this one mostly stock
Previously rides: 2005 V-Strom DL650, 1974 Vespa Ciao, 2011 Honda PCX 170 (tons of mods - takegawa 170cc big bore kit, gears, etc), 1996 Honda Nighthawk 250, 1987 Honda Spree, 2000 KTM 125SX, 2003 Honda Silverwing, 2007 Genuine Buddy 125, 1998 Honda PC800, 2008 Buddy 125 (white), 2008 Buddy 125 (red), 2001 Honda Reflex, 1987 Honda Elite, 1988 Honda Spree, 2007 Yamaha Vino, 2007 Honda Metro, 2x 125cc pure-chinesium dirt bikes
Previously rides: 2005 V-Strom DL650, 1974 Vespa Ciao, 2011 Honda PCX 170 (tons of mods - takegawa 170cc big bore kit, gears, etc), 1996 Honda Nighthawk 250, 1987 Honda Spree, 2000 KTM 125SX, 2003 Honda Silverwing, 2007 Genuine Buddy 125, 1998 Honda PC800, 2008 Buddy 125 (white), 2008 Buddy 125 (red), 2001 Honda Reflex, 1987 Honda Elite, 1988 Honda Spree, 2007 Yamaha Vino, 2007 Honda Metro, 2x 125cc pure-chinesium dirt bikes
- duive01
- Regular User
- Posts: 122
- Joined: Sat Mar 24, 2012 5:13 pm
- Location: Hoogeveen, The Netherlands
Re: How-To: Install a windshield
maddiedog, just tall enough, how tall is that?maddiedog wrote:It works AMAZING. I've ridden over 3000 miles behind it. I'm just tall enough to see over it, and all the wind blows over me. Rides are much more pleasant, and I stay much warmer than without it.
I'm looking for a windshield, I've been driving Honda's FES150 and FES250 bigger scooters and they had windscreens just tall enough for me to look over them and be able to ride with my visor up. I really love that. My concern is that when I buy the GIVI 322 it is too low and I get the full wind in my face, with the GIVI 323 that it is too high and I have to look through the plastic.
- maddiedog
- Benevolent Overlord
- Posts: 3640
- Joined: Tue Nov 01, 2011 7:04 pm
- Year: 2011
- Color: White
- Location: New Mexico
- Contact:
Re: How-To: Install a windshield
Hmm, I look over it, not through it, and I'm 5'10".
I can ride with the visor up no problem, but if I flip the modular part of my helmet up, the helmet catches the wind.
The smaller Givi shield doesn't do too much, I got a full blast of wind in my chest / head when I test-rode Pete (Kapang!)'s PCX to compare the windshields. I currently have the Ermax short windshield on (same as the one Scottish has here: http://hondapcx.org/viewtopic.php?f=2&t=210#p2266), but it doesn't provide enough protection, so I will be switching back as soon as I get a chance.
I can ride with the visor up no problem, but if I flip the modular part of my helmet up, the helmet catches the wind.
The smaller Givi shield doesn't do too much, I got a full blast of wind in my chest / head when I test-rode Pete (Kapang!)'s PCX to compare the windshields. I currently have the Ermax short windshield on (same as the one Scottish has here: http://hondapcx.org/viewtopic.php?f=2&t=210#p2266), but it doesn't provide enough protection, so I will be switching back as soon as I get a chance.
Currently ride: 2011 Honda PCX 125 - Upgraded windshield and seat, keeping this one mostly stock
Previously rides: 2005 V-Strom DL650, 1974 Vespa Ciao, 2011 Honda PCX 170 (tons of mods - takegawa 170cc big bore kit, gears, etc), 1996 Honda Nighthawk 250, 1987 Honda Spree, 2000 KTM 125SX, 2003 Honda Silverwing, 2007 Genuine Buddy 125, 1998 Honda PC800, 2008 Buddy 125 (white), 2008 Buddy 125 (red), 2001 Honda Reflex, 1987 Honda Elite, 1988 Honda Spree, 2007 Yamaha Vino, 2007 Honda Metro, 2x 125cc pure-chinesium dirt bikes
Previously rides: 2005 V-Strom DL650, 1974 Vespa Ciao, 2011 Honda PCX 170 (tons of mods - takegawa 170cc big bore kit, gears, etc), 1996 Honda Nighthawk 250, 1987 Honda Spree, 2000 KTM 125SX, 2003 Honda Silverwing, 2007 Genuine Buddy 125, 1998 Honda PC800, 2008 Buddy 125 (white), 2008 Buddy 125 (red), 2001 Honda Reflex, 1987 Honda Elite, 1988 Honda Spree, 2007 Yamaha Vino, 2007 Honda Metro, 2x 125cc pure-chinesium dirt bikes
Re: How-To: Install a windshield
Im glad I bought the tall Ermax +25 then. Good compromise between looks and keeping the wind off. Wont be changing it.
Re: How-To: Install a windshield
Maddiedog,
Thanks for an excellent set of instructions. You made them "idiot proof!"
Steve in New Jersey
Thanks for an excellent set of instructions. You made them "idiot proof!"
Steve in New Jersey
Re: How-To: Install a windshield
Thx u For this Topic.
I come from Thailand.
I'm looking to buy this Because dealer Not imported into the country.
I fide this use " D323KIT - WINDSHIELD FITTING KIT " In conjunction with 323DT SCREEN BLADE But I do not see you use.
(http://tourandride.com/my-bike/honda/pc ... itting-kit)
I wonder if you have or not.
Thanks for the answer.
Reverential
I come from Thailand.
I'm looking to buy this Because dealer Not imported into the country.
I fide this use " D323KIT - WINDSHIELD FITTING KIT " In conjunction with 323DT SCREEN BLADE But I do not see you use.
(http://tourandride.com/my-bike/honda/pc ... itting-kit)
I wonder if you have or not.
Thanks for the answer.
Reverential
- maddiedog
- Benevolent Overlord
- Posts: 3640
- Joined: Tue Nov 01, 2011 7:04 pm
- Year: 2011
- Color: White
- Location: New Mexico
- Contact:
Re: How-To: Install a windshield
Reverential -
I did use the kit, but took it off because the mirrors only barely hit the windshield.
I did use the kit, but took it off because the mirrors only barely hit the windshield.
Currently ride: 2011 Honda PCX 125 - Upgraded windshield and seat, keeping this one mostly stock
Previously rides: 2005 V-Strom DL650, 1974 Vespa Ciao, 2011 Honda PCX 170 (tons of mods - takegawa 170cc big bore kit, gears, etc), 1996 Honda Nighthawk 250, 1987 Honda Spree, 2000 KTM 125SX, 2003 Honda Silverwing, 2007 Genuine Buddy 125, 1998 Honda PC800, 2008 Buddy 125 (white), 2008 Buddy 125 (red), 2001 Honda Reflex, 1987 Honda Elite, 1988 Honda Spree, 2007 Yamaha Vino, 2007 Honda Metro, 2x 125cc pure-chinesium dirt bikes
Previously rides: 2005 V-Strom DL650, 1974 Vespa Ciao, 2011 Honda PCX 170 (tons of mods - takegawa 170cc big bore kit, gears, etc), 1996 Honda Nighthawk 250, 1987 Honda Spree, 2000 KTM 125SX, 2003 Honda Silverwing, 2007 Genuine Buddy 125, 1998 Honda PC800, 2008 Buddy 125 (white), 2008 Buddy 125 (red), 2001 Honda Reflex, 1987 Honda Elite, 1988 Honda Spree, 2007 Yamaha Vino, 2007 Honda Metro, 2x 125cc pure-chinesium dirt bikes
Re: How-To: Install a windshield
Thanks Maddie
Picked up a used but excellent Givi 322st, fitted for the 25 mile return journey.
Accelerates quicker and doing the 40/50mph zones in Surrey/West London were very comfortable. The wind is hitting at collarbone level, I'm 5' 10"ish and helmet (full face flip) is quieter inside but you hear more wind at the top of the screen, if that makes sense. I noticed my speed was creeping over in town so must be feeling better in general
Picked up a used but excellent Givi 322st, fitted for the 25 mile return journey.
Accelerates quicker and doing the 40/50mph zones in Surrey/West London were very comfortable. The wind is hitting at collarbone level, I'm 5' 10"ish and helmet (full face flip) is quieter inside but you hear more wind at the top of the screen, if that makes sense. I noticed my speed was creeping over in town so must be feeling better in general
Re: How-To: Install a windshield
FedEx delivered my new windshield today, along with some new Sliders pants. Thanks to this excellent thread, I installed the windscreen in about 10 minutes. Easy peasy, lemon squezie!!!
Now just waiting on the backordered Givi plate and top case and the scoot will be perfect.
Now just waiting on the backordered Givi plate and top case and the scoot will be perfect.
Re: How-To: Install a windshield
Thank you for the install instructions Maddiedog! My Magical Racing windshield just arrived today and thanks to you it only took me about 10 mins to install. I love it! <3
- Attachments
-
- MagicRacing2.jpg (48.23 KiB) Viewed 7572 times
-
- MagicRacing1.jpg (52.59 KiB) Viewed 7572 times
- maddiedog
- Benevolent Overlord
- Posts: 3640
- Joined: Tue Nov 01, 2011 7:04 pm
- Year: 2011
- Color: White
- Location: New Mexico
- Contact:
Re: How-To: Install a windshield
Looking good! You're welcome.
Currently ride: 2011 Honda PCX 125 - Upgraded windshield and seat, keeping this one mostly stock
Previously rides: 2005 V-Strom DL650, 1974 Vespa Ciao, 2011 Honda PCX 170 (tons of mods - takegawa 170cc big bore kit, gears, etc), 1996 Honda Nighthawk 250, 1987 Honda Spree, 2000 KTM 125SX, 2003 Honda Silverwing, 2007 Genuine Buddy 125, 1998 Honda PC800, 2008 Buddy 125 (white), 2008 Buddy 125 (red), 2001 Honda Reflex, 1987 Honda Elite, 1988 Honda Spree, 2007 Yamaha Vino, 2007 Honda Metro, 2x 125cc pure-chinesium dirt bikes
Previously rides: 2005 V-Strom DL650, 1974 Vespa Ciao, 2011 Honda PCX 170 (tons of mods - takegawa 170cc big bore kit, gears, etc), 1996 Honda Nighthawk 250, 1987 Honda Spree, 2000 KTM 125SX, 2003 Honda Silverwing, 2007 Genuine Buddy 125, 1998 Honda PC800, 2008 Buddy 125 (white), 2008 Buddy 125 (red), 2001 Honda Reflex, 1987 Honda Elite, 1988 Honda Spree, 2007 Yamaha Vino, 2007 Honda Metro, 2x 125cc pure-chinesium dirt bikes
- you you
- What's a wot?
- Posts: 10000
- Joined: Sat Jun 30, 2012 5:37 pm
- Location: Between Lulu and Chichi
Re: How-To: Install a windshield
How do you keep it so clean? My car is metallic black and it doesn't look this clean 10 minutes after I've washed itms_sparky wrote:Thank you for the install instructions Maddiedog! My Magical Racing windshield just arrived today and thanks to you it only took me about 10 mins to install. I love it! <3