where in the world do i find a 28 mm ssocket?

eggman · Post by **eggman** » Wed Nov 23, 2016 12:20 pm

need it to have on hand when i do the clutch bearing in anohter 10000 miles

WhiteNoise · Post by **WhiteNoise** » Wed Nov 23, 2016 12:56 pm

Example: Ace hardware Craftsman 28mm, 1/2" 12 pt.
http://www.acehardware.com/product/inde ... d=37661366

Or, check Lowe's, Home Depot, Sears, online shop or ride there

HEADS UP! Black Friday Sales! Now till next Friday (I believe)
I stopped in at Sears last night and picked up two heavy-gauge S.S. Magnetic Bowls @ $5.99 each and other goodies. Worth the trip

eggman · Post by **eggman** » Wed Nov 23, 2016 1:28 pm

went to autozone home depot lowes harber freight and had no luck i think i found 29 and 30.

Mel46 · Post by **Mel46** » Wed Nov 23, 2016 1:29 pm

Tractor Supply Company should have it. They have all sorts of tools. There should be one not too far from you.

eggman · Post by **eggman** » Wed Nov 23, 2016 1:44 pm

cool ps what is the torque of the 28mm nut? will a cheap impact wrench remove it?

Mel46 · Post by **Mel46** » Wed Nov 23, 2016 1:45 pm

Amazon.com can get it to you in a day or two at the most.

cessna151 · Post by **cessna151** » Wed Nov 23, 2016 3:21 pm

I bought mine at Advance Auto.

kramnala58 · Post by **kramnala58** » Wed Nov 23, 2016 9:39 pm

Mel46 wrote:Amazon.com can get it to you in a day or two at the most.

Ditto. There are all sorts of them listed on Amazon.

Mel46 · Post by **Mel46** » Thu Nov 24, 2016 9:26 am

That was the one socket I was missing so I ordered it on Amazon.com yesterday and it will arrive tomorrow. Is that quick Enough?

aguim · Post by **aguim** » Thu Nov 24, 2016 3:06 pm

[quote="eggman"]need it to have on hand when i do the clutch bearing in anohter 10000 miles[/quote

aguim · Post by **aguim** » Thu Nov 24, 2016 3:32 pm

The 300 FORZA has a 30mm clutch nut (threads), BUT NEEDS A 41 mm SOCKET to remove it.
Same principle applies to the PCX's 28mm (threads) nut.

39mm head? (I measured my Forza's with a caliper, and found that 1-5/8" was right, and available)

If 39mm, use 1-1/2"---and be wary of that SPRING, there...

aguim · Post by **aguim** » Thu Nov 24, 2016 4:10 pm

[quote="aguim"]

aguim · Post by **aguim** » Thu Nov 24, 2016 4:43 pm

Sorry, got some editing 'problem'...

My point : I have checked with my 2014 Metropolitan, which also has that 28mm-threads nut. It
needs a 39mm socket to be removed. The PCX is probably similarly arranged.

eggman · Post by **eggman** » Thu Nov 24, 2016 4:44 pm

aguim wrote:The 300 FORZA has a 30mm clutch nut (threads), BUT NEEDS A 41 mm SOCKET to remove it.
Same principle applies to the PCX's 28mm (threads) nut.

39mm head? (I mesured my Forza's with a caliper, and found that 1-5/8" was right, and available)

If 39mm, use 1-1/2"---and be wary of that SPRING, there...

so I need a 39mm not 28?

aguim · Post by **aguim** » Thu Nov 24, 2016 5:06 pm

eggman wrote:
aguim wrote:The 300 FORZA has a 30mm clutch nut (threads), BUT NEEDS A 41 mm SOCKET to remove it.
Same principle applies to the PCX's 28mm (threads) nut.

39mm head? (I mesured my Forza's with a caliper, and found that 1-5/8" was right, and available)

If 39mm, use 1-1/2"---and be wary of that SPRING, there...
so I need a 39mm not 28?

My bet. 28mm applies to the nut's threads only.

Like, 6mm nuts have M6x1 threads, but are typically loosened using a 10mm wrench/socket.
To be sure, just remove the clutch drum and mesure that nut's head: probably 39mm, a size very
common there.

The Honda PCX / Forza / ADV150 / SH Forums

where in the world do i find a 28 mm ssocket?

where in the world do i find a 28 mm ssocket?

Re: where in the world do i find a 28 mm ssocket?

Re: where in the world do i find a 28 mm ssocket?

Re: where in the world do i find a 28 mm ssocket?

Re: where in the world do i find a 28 mm ssocket?

Re: where in the world do i find a 28 mm ssocket?

Re: where in the world do i find a 28 mm ssocket?

Re: where in the world do i find a 28 mm ssocket?

Re: where in the world do i find a 28 mm ssocket?

Re: where in the world do i find a 28 mm ssocket?

Re: where in the world do i find a 28 mm ssocket?

Re: where in the world do i find a 28 mm ssocket?

Re: where in the world do i find a 28 mm ssocket?

Re: where in the world do i find a 28 mm ssocket?

Re: where in the world do i find a 28 mm ssocket?