Page 1 of 1
Scan tool interface to pcx
Posted: Sat Sep 14, 2019 2:52 pm
by Mikes150pcx
I hooked up my obd2 scanner to my pcx and now I can read live data and clear codes! At first I just jumped wired and a bit later I cut a obd2 connecter out of a junked Ford a wired it to the 4 pin diagnostic connector. It works no problem. Just so you know any obd2 can ascertain generic data by law and will interface but make certain you get power and ground right and the data pin to the correct iso. It's simple.
Re: Scan tool interface to pcx
Posted: Mon Sep 30, 2019 3:19 pm
by zroger73
What OBD II scan tool are you using?
Re: Scan tool interface to pcx
Posted: Tue Oct 01, 2019 4:47 am
by iceman
Yeah, what tool and wiring as others have purchased interfaces / readers off ebay and some work and some don't. Thanks!
Re: Scan tool interface to pcx
Posted: Tue Oct 29, 2019 4:51 am
by bongski
Mikes150pcx wrote:I hooked up my obd2 scanner to my pcx and now I can read live data and clear codes! At first I just jumped wired and a bit later I cut a obd2 connecter out of a junked Ford a wired it to the 4 pin diagnostic connector. It works no problem. Just so you know any obd2 can ascertain generic data by law and will interface but make certain you get power and ground right and the data pin to the correct iso. It's simple.
Did you just directly wired the OBD2 connector to the 4 pin connector?
Sent from my LG-H860 using Tapatalk
Re: Scan tool interface to pcx
Posted: Wed May 13, 2020 12:56 pm
by Conelite
I bought the 4-pin to Standard OBD2 plug adaptor. Only issue is there is no data transfer. Wonder what pins he moved around. Im assuming its the data pin.
Re: Scan tool interface to pcx
Posted: Wed May 13, 2020 5:26 pm
by Gil
A wiring diagram would be great.
Re: Scan tool interface to pcx
Posted: Sun Feb 14, 2021 2:50 pm
by amin12345
Mikes150pcx wrote: ↑Sat Sep 14, 2019 2:52 pm
I hooked up my obd2 scanner to my pcx and now I can read live data and clear codes! At first I just jumped wired and a bit later I cut a obd2 connecter out of a junked Ford a wired it to the 4 pin diagnostic connector. It works no problem. Just so you know any obd2 can ascertain generic data by law and will interface but make certain you get power and ground right and the data pin to the correct iso. It's simple.
which OBD2 Tool are you using and the wiring pls?
Re: Scan tool interface to pcx
Posted: Tue Feb 23, 2021 6:49 pm
by pcx888
yea i would like to know too.
Re: Scan tool interface to pcx
Posted: Wed Feb 24, 2021 4:33 pm
by Oyabun
I use a home made cable, and the cheapest ebay special elm327 clone Bluetooth dongle to connect the Torque app running on my phone to the bike.
Works like a charm.