The Honda PCX / Forza / ADV150 / SH Forums

Also what do you mean sump. I ran the scooter only 3 miles

There was no oil when cold but when warm there oil on the stick

I found out that if you remove the strainer you need to add .9L but if you only change the oil and not the strainer you need to add.8L. What are the damages I could cause by running .8L which is .1L less than what I should put. Thanks

Hi I wanted to clarify, so when the scooter is cold I do not see any oil in the stick, but when it is warmed up there is oil but uneven. Please help thanks

Hi, I have a 2011 pcx 125. I recently done a oil change and filter clean. My question is, is .8L enough oil because when it is cold I do not see the oil but when idling for 2 minute I can see it slanted one side of circle is filled up to the second bubble while the other side is above the lower limi...

Thanks for the detailed instruction, do you think I need to change out the hidden resovior since my scooter is a 2011 with only 1000miles. When looking at the screen outside of reservoir to see if it is full or not I see a tiny bubble. How do I get rid of it?. Also can you teach me how to change out...

Since I have two resovior do I need to do both at the same time or can I do the out first and then the inside later. Can you describe the process of how to change the fluid. Thanks

So for changing out brake fluid can I do the top reservoir first by hooking it up by the top nipple. After I drain I would fill it back up making sure it does not go empty. The process is I ask someone to hold on brake and I release the screw to nipple. After I tighten nut and ask the person to pump...

Ok thank you so much

Wait I just realized the drive oil is same as engine oil.

Also how do you prevent air bubble when bleeding. Also what would happen if air did get in while bleeding

Thanks for the informative help, I really appreciate it. When I got my scooter it didn't come with a manual. I have another question how do you change out the coolant. Also how many bottle of Honda motorcycle coolant do you need

My last question is how do I know if the valves are tight or loose without taking the whole bike apart.

So does it mean there are two brake fluid holders. I know one is near the accelerator. Where is the second one. Also which nipple do I hook up to release the fluid near the accelerator. Thank you so much for your help

How do you know which nipple goes with which brake fluid holder. There are two nipples on it which makes it confusing.

Hi, I plan on doing maintenance on my scooter and would like to know how much motor oil to add. I've been getting different amount from 2 quart to 1 quart to even .8 liters. I would also like to know how do I bleed the brake fluid. I see on the brake itself there are two areas where you can bleed. L...

I bought a pcx 125 back in December of 2011 and now it currently has 1000 miles. Do I need to change the coolant and tranny. Also when changing the engine oil can I remove the drain plug and filter every time. Do I fill it up with 10w30 oil 800ml. I'm kinda confused when the manual say .8 drain and ...