How-to: Forza Front Wheel Bearing R&R

easyrider · Post by **easyrider** » Mon Apr 22, 2019 1:40 pm

Had to do it to prove it.

https://youtu.be/0IaQ4jOLmxE

fish · Post by **fish** » Mon Apr 22, 2019 6:27 pm

easyrider wrote:Had to do it to prove it.

https://youtu.be/0IaQ4jOLmxE

Very cool - darn few DIY's for this scooter - so please add FORZA into the title of your video.
Thanks for posting!
Great scooter!
Fish

davenowherejones · Post by **davenowherejones** » Mon Apr 22, 2019 7:11 pm

Did it improve anything?

easyrider · Post by **easyrider** » Mon Apr 22, 2019 7:50 pm

Yes, it proved you were right..Its the tire! Same whine as before.

davenowherejones · Post by **davenowherejones** » Mon Apr 22, 2019 10:23 pm

I have been hearing impaired for almost all of my almost 60 years. I guess it has some benefits.

I was operating a Bobcat skid steer the other day, I heard a very loud squeal, a nasty metal on metal squeal. I was wondering what I had broken. I looked around and saw a train shunting on the rail road tracks across the road. I am glad I did not have to REPAIR the machine I was using.

Other machines I have used have complained and I never heard it. I briefly had a Ford Ranger with a 5 speed. I drove on the highway at high speed in 3rd gear. The Ranger did not have a tach and I could not hear the motor complain until it broke.

easyrider · Post by **easyrider** » Tue Apr 23, 2019 9:30 am

Dave, you do crack me up..Your hearing got this one right..I fortunately have the resources to do these jobs and it's not a problem for me so that's why I did it. In my heart of hearts I knew it was the tire, road, or tread...but now I know for sure.

davenowherejones · Post by **davenowherejones** » Tue Apr 23, 2019 10:59 am

And you made a very nice video of it. Thank you.

I look forward to your belt change video.

E. Foster Salsbury · Post by **E. Foster Salsbury** » Wed Apr 24, 2019 4:50 pm

Nice video but it ended very abruptly. I wanted to see the wheel installed and a test ride

Is the tire mounted in the correct direction?

easyrider · Post by **easyrider** » Thu Apr 25, 2019 6:25 am

I focused this DIY video only on the wheel bearing removal process and installation. The wheel installation is in reverse of the removal and the test ride would be difficult to film as there would be a lot of wind, road, engine noise to cope with on a microphone. Hope the video gives insight into what could be expected when contemplating this job. My focus was to keep it as short and succinct as possible leaving out the minutia. Some obvious aspects were left out as I thought they were self explanatory such as cleaning the hub and greasing the new bearing to help it slide in the hub, torquing, etc etc. I had to do the job so why not film it so others could have an idea of what this entails..

WhiteNoise · Post by **WhiteNoise** » Fri Apr 26, 2019 1:35 pm

Easyr, that's a very helpful video

Thank you!

Do you want to re-name this thread so others can easily recognize what your mission was? This is def a
How-To right? so it will more than likely be moved over there

Sooo....Stop yer whinig and let me know Mr. (ex) Lawn Guy-land guy

This one's for you!

easyrider · Post by **easyrider** » Fri Apr 26, 2019 2:50 pm

Yes move it (video) anywhere you like.
PS I used to work at Jones Beach many moons ago. Remember it well.

WhiteNoise · Post by **WhiteNoise** » Sun Apr 28, 2019 10:51 am

Yes, I remember you telling me about Jones Beach cool guy!

thus my video.
I thought I'd bring you (us) back in time for a "few" minutes (oh to go back longer....sigh).

Back to bizz, Tell me Please what to re-title your thread and I will do so. It's your baby. Afterwards it will be moved to the "how-to" board where others will appreciate your efforts.

Btw, We're still waiting for warmer weather here, but you knew that already

Jones Beach will have to wait

easyrider · Post by **easyrider** » Sun Apr 28, 2019 1:47 pm

Forza front wheel bearing replacement.

WhiteNoise · Post by **WhiteNoise** » Mon Apr 29, 2019 11:34 am

Done. To be moved

CamboForza · Post by **CamboForza** » Thu Feb 22, 2024 7:14 am

Hi Guys,

What size Hex tool is used for undoing the axle rod?

CamboForza · Post by **CamboForza** » Thu Feb 22, 2024 7:32 am

I think it is 17mm hex??

The Honda PCX / Forza / ADV150 / SH Forums

How-to: Forza Front Wheel Bearing R&R

How-to: Forza Front Wheel Bearing R&R

Re: How-to: Forza Front Wheel Bearing R&R

Re: How-to: Forza Front Wheel Bearing R&R

Re: How-to: Forza Front Wheel Bearing R&R

Re: How-to: Forza Front Wheel Bearing R&R

Re: How-to: Forza Front Wheel Bearing R&R

Re: How-to: Forza Front Wheel Bearing R&R

Re: How-to: Forza Front Wheel Bearing R&R

Re: how-to: Forza Front Wheel Bearing R&R

Re: How-to: Forza Front Wheel Bearing R&R

Re: How-to: Forza Front Wheel Bearing R&R

Re: How-to: Forza Front Wheel Bearing R&R

Re: How-to: Forza Front Wheel Bearing R&R

Re: How-to: Forza Front Wheel Bearing R&R

Re: How-to: Forza Front Wheel Bearing R&R

Re: How-to: Forza Front Wheel Bearing R&R