The Honda PCX / Forza / ADV150 / SH Forums

Anyone that has disassembled their bodywork would know that underneath the tail plastics of the 2015+ PCX150 there is a BEAUTIFUL black powdercoated OEM seat frame that accentuates the curves that a naked version of the PCX might have had. And while I discovered it a few years ago I never had the courage to put my PCX under the knife again to figure out how to really make it happen

So over the last 2 years I fought to keep the OEM plastics in wonderful condition save for a few scrapes here and there. And well, then they released the 2019 and I figured I'm fighting a losing battle and It's time to let go and try something NEW!

So this all started with doing a regular service, oil, coolant, thermostat, drive belt, filter, etc and one thing led to the other. What should have been fairly routine ended up in 100 bucks of service consumables and another 50 bucks in custom LEDs, tail lights and about 2 days of custom wiring, brackets and wire-tucking.

And so, without further ado, I present my naked-tail PCX streetfighter below. Custom work includes the following:
*Rerouting all wiring harnesses and lock wire through cargo box
*wiring a universal brake light and LED turn signals into existing harness (really tricky)
*shaving all mounting brackets on right-side frame
*Mounting SMD LED turn signals
*Next Step: Cover gas tank area to hide existing wiring

I'd love to hear what you think, hate it? Love it? I personally feel like it just makes it look SO aggressive and sporty.

Appears to have been wrecked, and awaiting repairs.
Fish

Agreed, looks cobbled.....

awww okay. I will put the stock plastics back on.

Sounds horrendous, but where's the picture?

Sounds horrendous, but where's the picture?

I say. . . no picture here either.

Mr.Scooty wrote:Anyone that has disassembled their bodywork would know that underneath the tail plastics of the 2015+ PCX150 there is a BEAUTIFUL black powdercoated OEM seat frame that accentuates the curves that a naked version of the PCX might have had. And while I discovered it a few years ago I never had the courage to put my PCX under the knife again to figure out how to really make it happen

So over the last 2 years I fought to keep the OEM plastics in wonderful condition save for a few scrapes here and there. And well, then they released the 2019 and I figured I'm fighting a losing battle and It's time to let go and try something NEW!

So this all started with doing a regular service, oil, coolant, thermostat, drive belt, filter, etc and one thing led to the other. What should have been fairly routine ended up in 100 bucks of service consumables and another 50 bucks in custom LEDs, tail lights and about 2 days of custom wiring, brackets and wire-tucking.

And so, without further ado, I present my naked-tail PCX streetfighter below. Custom work includes the following:
*Rerouting all wiring harnesses and lock wire through cargo box
*wiring a universal brake light and LED turn signals into existing harness (really tricky)
*shaving all mounting brackets on right-side frame
*Mounting SMD LED turn signals
*Next Step: Cover gas tank area to hide existing wiring

I'd love to hear what you think, hate it? Love it? I personally feel like it just makes it look SO aggressive and sporty.

Pics please

Love to see someone push the boundaries in their own personal passion.

Stuff the nay-sayers and go for it. So long as it doesn't offend or hurt anyone and you learn something from it you've done yourself proud and pleased a few of us curious onlookers. Heck, we may even learn something from the whole experiment!

Beers!

Heh there Mr. Scooty, give us a chance! Let's see your pics so we can toss the coin.
By the way, have you ever seen member dasshreddar's scoot? No? Well, that's a must see/read!

I'll trade you. Your pics for dass's thread! What say you?
Okay, me first
http://www.hondapcx.org/viewtopic.php?f=4&t=722

Top quality thread.

Here's a naked Owl, it doesn't look so hot to me...

chicaboo wrote:Here's a naked Owl, it doesn't look so hot to me...

Probably needs a seat. I’m no expert though.

That Is funny!
Seat in De-humping process? Perhaps, perhaps, perhaps(?)

WhiteNoise wrote:That Is funny!
Seat in De-humping process? Perhaps, perhaps, perhaps(?)

you the sanest person here

you you wrote:

chicaboo wrote:Here's a naked Owl, it doesn't look so hot to me...

Probably needs a seat. I’m no expert though.

I think the right milk crate would do the job.

I think the best nakked looking PCX would come from transplanting a PCX enine to a ruckus.

Can we have a “unable to comment on what it looks like until we can see it option”.

you you wrote:Can we have a “unable to comment on what it looks like until we can see it option”.

No need.
Take it from me, it looks shit.

Whoa....now that's ^^ to the point!

2yous, agree I wish I could add that option to his survey. Hmm...
Nooo, yer joshing me right? I'm Not the sanest, nor are ye. I knows that!

To the OP:
WE AWAIT PHOTO'S OF NAKED BIKE PLEASE. WANT TO VOTE.
YOU HAVE AN AUDIENCE. WE'RE STUFFED WITH POPCORN! THIRSTY HERE, WHERE'S THE BEER?

1) How can I tell if I like the way it looks if I can't find anything to look at? No pic at all?

2) I think if you want a naked bike you might be better served to get one that has been designed to go naked. The PCX is dressed for several reasons that I can think of: 1) To protect its delicate innards and 2) To give it an aerodynamic profile as it battles the headwinds.

But, this is all speculation on my part. You will have to try it to find out just how full or not of shit I really I am. I already know and so I speak diffidently.