Acceleration ONLY! PCX 150 2013

[CaliCal]

Amazing picture! Thanks for sharing.

As an amateur mechanic, do you think I have the ability (and balls) to change the dr pulley rollers myself or should I take it to a shop?

[sendler2112]

to change the dr pulley rollers myself

There are endless youtube videos on how to change variator weights.

[ScooterMan]

I'd change the roller weights for you no charge, but I'm in San Diego right near the airport. Kind of a long ride! =P

If you don't have access to a compressor and air impact gun with a 19mm and I believe 24mm socket...then just pay a scoot shop to do it.

Yeah, look up youtube...it's pretty basic.

[vamootsman]

Amazing picture! Thanks for sharing.

As an amateur mechanic, do you think I have the ability (and balls) to change the dr pulley rollers myself or should I take it to a shop?

Its really easy if you have the tools. Good video on Youtube. You can use a DeWalt cordless impact Driver or an air powered one, borrow if necessary. I can make the change in less than 10 minutes now. You don't have to remove any body panels if you have the right ratchets and extensions.

I don't know what impact gun the guy in the video has but I wouldn't own it.

https://m.youtube.com/watch?v=q8c1njzv69U

Just lay everything out that your remove, in the position on the floor that it came from. ( there are different lengths of bolts). And pay attention to how the variator comes apart. ( Video it!).

[homie]

Amazing picture! Thanks for sharing.

As an amateur mechanic, do you think I have the ability (and balls) to change the dr pulley rollers myself or should I take it to a shop?

Its really easy if you have the tools. Good video on Youtube. You can use a DeWalt cordless impact Driver or an air powered one, borrow if necessary. I can make the change in less than 10 minutes now. You don't have to remove any body panels if you have the right ratchets and extensions.

I don't know what impact gun the guy in the video has but I wouldn't own it.

https://m.youtube.com/watch?v=q8c1njzv69U

Just lay everything out that your remove, in the position on the floor that it came from. ( there are different lengths of bolts). And pay attention to how the variator comes apart. ( Video it!).

I will be doing this next week for the first time... I don't own any impact tools or the torque wrench it might take to tighten that back up. Maybe you could give me a shopping list and proper tool terminology so's homie don't make like fool down at Harbor freight He is using lock tight (blue)?

[homie]

Only I won't be working around belts and pulley's in motion with loose strings from my hoody... for a minute I thought this was going to be a snuff video

[vamootsman]

Only I won't be working around belts and pulley's in motion with loose strings from my hoody... for a minute I thought this was going to be a snuff video

Your cracking me up Homie!

[seedy]

PCX Turbo

http://www.turbodynamic.net/content/garage.php