NCY variator and sliders - not a good combo

Mgalutia88 · Post by **Mgalutia88** » Wed Nov 27, 2013 8:13 pm

So we all know that dr pulley sliders are a great product. I also enjoy my NCY variator, it's an ok piece that raised my pcx 150 top speed to 77 mph down hill and 75 mph on flat ground. I trie using sliders in this variator... Twice. Something about the coating in the NCY variator does not mix with the sliders. There is jerking and bucking at around 65 mph and that's the top end.

Just an FYI to you all.

maddiedog · Post by **maddiedog** » Mon Dec 09, 2013 11:19 am

Good heads-up. The shape of the faces for the rollers may cause binding.

ScooterMan · Post by **ScooterMan** » Sun Oct 12, 2014 9:37 pm

Been googling this question and it let me back to this forum! Duh. I've know I've read somewhere that sliders and the coated NCY vario weren't compatible, may have been here, maybe somewhere else.

Anyway, any update on this Maglutia? R U back to rollers? What weight rollers are you now using. I've been using the stock rollers thinking they're better for FE, but now wanting a bit more performance. After running some 16G rollers instead of the 18G that came stock in the NCY unit, I'm now reading more and thinking I want to try 13G which I happen to have a set of in my garage right now.

I may throw them on shortly and report back my thoughts. =)

buddy1976 · Post by **buddy1976** » Mon Oct 13, 2014 8:50 am

They dont work well in the malossi multivar either, reduce top speed and acceleration compared to rollers.

you you · Post by **you you** » Mon Oct 13, 2014 5:19 pm

maddiedog wrote:Good heads-up. The shape of the faces for the rollers may cause binding.

Or put them in the wrong way round?

ScooterMan · Post by **ScooterMan** » Mon Oct 13, 2014 7:45 pm

you you wrote:
Or put them in the wrong way round?

Well, that has been done before!

shivayash · Post by **shivayash** » Thu Oct 30, 2014 6:24 am

J Costa. Can't go wrong. The best quality.

nribeiro · Post by **nribeiro** » Fri Oct 31, 2014 4:43 am

shivayash let me tell you that even JCosta isn't the masterpice of variator's. Yeah it gives more acceleration on take off and more top speed but only downhill. I had it installed for a lot of km and now I'm using stock variator with Dr. Pulley sliders and some mod's on the variator and it is giving me an overall better performance uphill and against wind!

mikelx5 · Post by **mikelx5** » Wed Nov 05, 2014 12:10 pm

Dont use sliders with the yuminashi vario either the belt will rub the back case till it snaps

ScooterMan · Post by **ScooterMan** » Wed Nov 05, 2014 9:16 pm

Hmmm, I should set up my video cam and pull off the side cover and run it on the stand and see how much clearance it has with the current rollers. I have the sliders in my "cart" on Amazon, just haven't pulled the trigger yet.

I can afford a belt seeing as i have a spare and (2) PCX 150's at that as well.

The Honda PCX / Forza / ADV150 / SH Forums

NCY variator and sliders - not a good combo

NCY variator and sliders - not a good combo

Re: NCY variator and sliders - not a good combo

Re: NCY variator and sliders - not a good combo

Re: NCY variator and sliders - not a good combo

Re: NCY variator and sliders - not a good combo

Re: NCY variator and sliders - not a good combo

Re: NCY variator and sliders - not a good combo

Re: NCY variator and sliders - not a good combo

Re: NCY variator and sliders - not a good combo

Re: NCY variator and sliders - not a good combo