Scan tool interface to pcx
Moderator: Modsquad
-
Mikes150pcx
- New Member
- Posts: 29
- Joined: Mon Jul 08, 2019 1:01 am
- Year: 2019
- Color: Metallic grey
- Location: Northern Neck Virginia
Scan tool interface to pcx
I hooked up my obd2 scanner to my pcx and now I can read live data and clear codes! At first I just jumped wired and a bit later I cut a obd2 connecter out of a junked Ford a wired it to the 4 pin diagnostic connector. It works no problem. Just so you know any obd2 can ascertain generic data by law and will interface but make certain you get power and ground right and the data pin to the correct iso. It's simple.
-
zroger73
- Regular User
- Posts: 60
- Joined: Tue Apr 02, 2019 3:45 pm
- Year: 2019
- Color: Bronze
- Location: Texas
Re: Scan tool interface to pcx
What OBD II scan tool are you using?
-
iceman
- Forum Benefactor
- Posts: 2857
- Joined: Sun Dec 29, 2013 11:43 pm
- Year: 2014 125 (LED)
- Color: White
- Location: London, England
Re: Scan tool interface to pcx
Yeah, what tool and wiring as others have purchased interfaces / readers off ebay and some work and some don't. Thanks!
-
bongski
- New Member
- Posts: 2
- Joined: Wed Feb 13, 2019 11:30 pm
- Year: 2018
- Color: Silver
- Location: PH NCR
Re: Scan tool interface to pcx
Did you just directly wired the OBD2 connector to the 4 pin connector?Mikes150pcx wrote:I hooked up my obd2 scanner to my pcx and now I can read live data and clear codes! At first I just jumped wired and a bit later I cut a obd2 connecter out of a junked Ford a wired it to the 4 pin diagnostic connector. It works no problem. Just so you know any obd2 can ascertain generic data by law and will interface but make certain you get power and ground right and the data pin to the correct iso. It's simple.
Sent from my LG-H860 using Tapatalk
Re: Scan tool interface to pcx
I bought the 4-pin to Standard OBD2 plug adaptor. Only issue is there is no data transfer. Wonder what pins he moved around. Im assuming its the data pin.
2017 PCX 150
Wirus Win Exhaust
Steady Garage Intake
Z-Bars
NCY Variator
Wirus Win Exhaust
Steady Garage Intake
Z-Bars
NCY Variator
-
Gil
- Frequent Poster
- Posts: 623
- Joined: Mon Nov 09, 2015 10:20 pm
- Year: 2013
- Color: black
- Location: Watsonville, CA
Re: Scan tool interface to pcx
A wiring diagram would be great.
- 2013 Honda PCX 150, NCY Variator kit, Dr Pulley 13g Roller weights
- IRC and City Grip tires, LED driving lights, Coroplast top box, MFR exhaust, Daytona Windshield.
Re: Scan tool interface to pcx
which OBD2 Tool are you using and the wiring pls?Mikes150pcx wrote: ↑Sat Sep 14, 2019 2:52 pm I hooked up my obd2 scanner to my pcx and now I can read live data and clear codes! At first I just jumped wired and a bit later I cut a obd2 connecter out of a junked Ford a wired it to the 4 pin diagnostic connector. It works no problem. Just so you know any obd2 can ascertain generic data by law and will interface but make certain you get power and ground right and the data pin to the correct iso. It's simple.
-
pcx888
- Regular User
- Posts: 171
- Joined: Sat Nov 25, 2017 9:31 pm
- Year: 2011
- Color: pearl white
- Location: Hacienda Heights, Cali
Re: Scan tool interface to pcx
yea i would like to know too.
2011 White PCX
Michelin Tire City Grip Front and Rear
Aftermarket Thai Seat.
JDM Front lights and Rear Lights and Fender.
NCY Variator, And Face and 13 Dr. pulley sliders.
Rear NCY 1000 contra spring.
NCY Textured clutch bell.
Michelin Tire City Grip Front and Rear
Aftermarket Thai Seat.
JDM Front lights and Rear Lights and Fender.
NCY Variator, And Face and 13 Dr. pulley sliders.
Rear NCY 1000 contra spring.
NCY Textured clutch bell.
-
Oyabun
- Frequent Poster
- Posts: 640
- Joined: Sun Jun 28, 2015 4:24 pm
- Year: `12,`15,`19
- Color: black&black
- Location: Europe
Re: Scan tool interface to pcx
I use a home made cable, and the cheapest ebay special elm327 clone Bluetooth dongle to connect the Torque app running on my phone to the bike.
Works like a charm.
Works like a charm.