Forza aftermarket exhaust

Cosmetic accessories, comfort accessories, windshields, luggage racks, etc.

Moderator: Modsquad

txpcx13
Regular User
Regular User
Posts: 83
Joined: Fri Feb 26, 2016 1:34 pm
Year: 13&14
Color: Rojox2
Location: Texas

Forza aftermarket exhaust

Post by txpcx13 »

You will see the diagram of the exhaust system for 2 different Honda bikes. Now I understand how and why certain places sell an exhaust overseas that is made for another Honda scoot.
It might not be 100% identical but who knows it might be because these are only sketches in a parts catalog.
Attachments
Screenshot_20160910-195944~2.png
Screenshot_20160910-195944~2.png (480.96 KiB) Viewed 6552 times
Screenshot_20160910-200107~2.png
Screenshot_20160910-200107~2.png (770.98 KiB) Viewed 6552 times
2013 Honda PCX (Red) - NCY 13g rollers, golden variator, drive face, YSS shocks, Givi E450
2014 Honda Forza (Red) - Adige 17g rollers, Kappa K466
txpcx13
Regular User
Regular User
Posts: 83
Joined: Fri Feb 26, 2016 1:34 pm
Year: 13&14
Color: Rojox2
Location: Texas

Re: Forza aftermarket exhaust

Post by txpcx13 »

Well the 1st pic is the SH300 and the 2nd pic is the Forza300 : )
I have also looked all over ebay(all countries too) looking at and comparing the used exhaust, and comparing the bends of the exhaust pipe.... if they are not exact then they are VERY close.
2013 Honda PCX (Red) - NCY 13g rollers, golden variator, drive face, YSS shocks, Givi E450
2014 Honda Forza (Red) - Adige 17g rollers, Kappa K466
chicaboo
Frequent Poster
Frequent Poster
Posts: 1158
Joined: Sun Apr 24, 2016 12:55 am

Re: Forza aftermarket exhaust

Post by chicaboo »

The slip-on part looks the same (muffler and heat shield), but the header pipes look different to me.
So if you're looking at an aftermarket exhaust for the SH300 hoping it'll fit the Forza, you might still be out of luck.
User avatar
gn2
Forum Benefactor
Forum Benefactor
Posts: 7767
Joined: Tue Dec 06, 2011 7:54 pm
Year: None
Location: NE Scotland

Re: Forza aftermarket exhaust

Post by gn2 »

SH300 and Forza 300 exhausts may look similar but are completely incompatible.
This has been brought up a few times before.
Four decades on two wheels has taught me nothing, all advice given is guaranteed to be wrong
txpcx13
Regular User
Regular User
Posts: 83
Joined: Fri Feb 26, 2016 1:34 pm
Year: 13&14
Color: Rojox2
Location: Texas

Re: Forza aftermarket exhaust

Post by txpcx13 »

I have seen it brought up but never seen it proven....incompatible.
What I find strange about the not fitting theory is that Power by Forza sells an exhaust for the Forza that is actually a SH300 part number and there are videos of it on youtube : )
.02
2013 Honda PCX (Red) - NCY 13g rollers, golden variator, drive face, YSS shocks, Givi E450
2014 Honda Forza (Red) - Adige 17g rollers, Kappa K466
User avatar
gn2
Forum Benefactor
Forum Benefactor
Posts: 7767
Joined: Tue Dec 06, 2011 7:54 pm
Year: None
Location: NE Scotland

Re: Forza aftermarket exhaust

Post by gn2 »

txpcx13 wrote:I have seen it brought up but never seen it proven....incompatible.
None so blind as them that won't see.
Four decades on two wheels has taught me nothing, all advice given is guaranteed to be wrong
User avatar
iLoveWagons
New Member
New Member
Posts: 21
Joined: Mon Jul 13, 2020 12:05 am
Year: 2016
Color: Red
Location: Vancouver, BC

Re: Forza aftermarket exhaust

Post by iLoveWagons »

Bringing this topic back from the dead; Anybody on here try to get a slip on from another similar CC bike and try to make it fit on the Forza 300 ?

I contacted a guy selling a burgman 400 arrow exhaust on Craigslist about this arrow muffler.

I think its the Arrow Reflex 2.0 exhaust.
Found some specs on it:
Silencer body lenght (mm) - 350,00
Junction (inlet) diameter (mm) - 40,00
Junction (outlet) diameter (mm) - 50,00

Will have to double check with the forza 300 exhaust Diameter is.
User avatar
iLoveWagons
New Member
New Member
Posts: 21
Joined: Mon Jul 13, 2020 12:05 am
Year: 2016
Color: Red
Location: Vancouver, BC

Re: Forza aftermarket exhaust

Post by iLoveWagons »

Today I took the Forza to get it's arrow slip on fitted to it.
Went to a fellow Honda Enthusiast who works at a machine shop in my area(Frankenstein Speed & Custom) and got a custom bracket and mid pipe fabricated to make it fit to the stock header. I'll be looking to ceramic coat in black everything but the slip on to clean it up even more.

I'll take more pics of the bracket when i take it apart and also measure the weight difference between the old and new.

Here's what it looks like: before and after picture.
Attachments
exhaust_StockVSNew.png
exhaust_StockVSNew.png (1.88 MiB) Viewed 5159 times
Austins
Regular User
Regular User
Posts: 148
Joined: Thu Feb 20, 2020 4:56 am
Year: 2016 Forza 300
Color: White
Location: Phuket, Thailand

Re: Forza aftermarket exhaust

Post by Austins »

Maybe also send a sound recording, I guess that was the main reason for the change...!
User avatar
iLoveWagons
New Member
New Member
Posts: 21
Joined: Mon Jul 13, 2020 12:05 am
Year: 2016
Color: Red
Location: Vancouver, BC

Re: Forza aftermarket exhaust

Post by iLoveWagons »

It was more for looks and then weight; sound wise it's just a little deeper cause i kept the dbkiller in.

I'm still able to stealthily speed around everywhere so its good.
Austins wrote:Maybe also send a sound recording, I guess that was the main reason for the change...!
User avatar
gn2
Forum Benefactor
Forum Benefactor
Posts: 7767
Joined: Tue Dec 06, 2011 7:54 pm
Year: None
Location: NE Scotland

Re: Forza aftermarket exhaust

Post by gn2 »

Don't understand why you bought a burgman exhaust when Arrow now make one for the Forza?
https://www.motorcycleraceparts.co.uk/h ... ust-system
Four decades on two wheels has taught me nothing, all advice given is guaranteed to be wrong
User avatar
iLoveWagons
New Member
New Member
Posts: 21
Joined: Mon Jul 13, 2020 12:05 am
Year: 2016
Color: Red
Location: Vancouver, BC

Re: Forza aftermarket exhaust

Post by iLoveWagons »

This cost me around 400CAD all in; would've cost significantly more if it was new with the delivery. and who knows how long it would've taken to arrive.
davenowherejones
Frequent Poster
Frequent Poster
Posts: 1817
Joined: Sat Jun 20, 2015 12:06 pm
Year: 2014
Color: Silver
Location: Hope, BC, Canada

Re: Forza aftermarket exhaust

Post by davenowherejones »

Forget exhausts. I want to run straight pipe just as an experiment. Not sure how to do that.

People have asked me if my Forza is electric. I wish it was.
User avatar
fish
Forum Benefactor
Forum Benefactor
Posts: 2497
Joined: Mon Jul 21, 2014 3:18 pm
Location: rural Ohio

Re: Forza aftermarket exhaust

Post by fish »

There are those who will sit looking at their Porsche Speedster.....and think, "I need to run down to Walmart and get some racing stripe tape and a set of fuzzy dice!"

Or a generic fart can that fits everything from an R6 to a Sears riding mower....
Fish
User avatar
Limey
Frequent Poster
Frequent Poster
Posts: 561
Joined: Tue Aug 08, 2017 2:35 pm
Year: 16 Forza/16 PCX
Color: Red/Maroon
Location: Panama City Beach, Florida USA
Contact:

Re: Forza aftermarket exhaust

Post by Limey »

fish wrote: Or a generic fart can that fits everything from an R6 to a Sears riding mower....
Fish
LOL - My wife and I call them 'fart boxes'. Sound ridiculous,especially on something like a Honda Civic! :lol: :lol:
User avatar
iLoveWagons
New Member
New Member
Posts: 21
Joined: Mon Jul 13, 2020 12:05 am
Year: 2016
Color: Red
Location: Vancouver, BC

Re: Forza aftermarket exhaust

Post by iLoveWagons »

davenowherejones wrote:Forget exhausts. I want to run straight pipe just as an experiment. Not sure how to do that.

People have asked me if my Forza is electric. I wish it was.

Just remove the rear can xD i was suprised how OK it sounded without the muffler on, but it was definitely too loud for street imo. it depends where you live i guess.
User avatar
iLoveWagons
New Member
New Member
Posts: 21
Joined: Mon Jul 13, 2020 12:05 am
Year: 2016
Color: Red
Location: Vancouver, BC

Re: Forza aftermarket exhaust

Post by iLoveWagons »

Finally got the header mid pipe and brackets ceramic coated black. Matches quite well with the stock black.
Looks 100% stock.

Put a bigger pic of the new setup
Attachments
clean.jpg
clean.jpg (257.87 KiB) Viewed 4871 times
finalProgress.png
finalProgress.png (824.04 KiB) Viewed 4871 times
User avatar
you you
What's a wot?
What's a wot?
Posts: 10000
Joined: Sat Jun 30, 2012 5:37 pm
Location: Between Lulu and Chichi

Re: Forza aftermarket exhaust

Post by you you »

That does look good
producerguy
New Member
New Member
Posts: 5
Joined: Wed Apr 14, 2021 12:54 pm

Re: Forza aftermarket exhaust

Post by producerguy »

Rarely do I see an aftermarket exhaust that actually looks better for the 'bike than stock, (with exception to those horrid squared-off cans for the ZX-14), but this is absolutely a major improvement over stock!! Great job. As soon as I get my Forza I'll be doing this as well.
Post Reply