my first 300. it appears that 1.5 qts over fills the bike. just dropping the stick into the hole without threading it in it show over full
any comments
oil level on stick
Moderator: Modsquad
-
E. Foster Salsbury
- Regular User
- Posts: 240
- Joined: Mon Oct 12, 2015 2:42 pm
- Year: 2015 NSS300A
- Location: Canada
Re: oil level on stick
When changing oil & engine oil filter:1.4 litres
When changing oil only:1.2 litres
When changing oil only:1.2 litres
Salsbury
2015 Forza 300ABS-2km 10/17/2015
2015 Forza 300ABS-2km 10/17/2015
-
j.d.b.
- Forum Benefactor
- Posts: 255
- Joined: Sat Jul 04, 2015 4:59 pm
- Year: 2013
- Color: red
- Location: Michigan
Re: oil level on stick
1.5 qts. is more than enough to change the oil in the motor AND the rear end. I think the figure is .8 qts. for the motor without opening the screen.
Re: oil level on stick
yes indeed; that is the shop manual spec. BUT it appears to over fill if i look at the stick as per my org post.E. Foster Salsbury wrote:When changing oil & engine oil filter:1.4 litres
When changing oil only:1.2 litres
-
Jge64
- Frequent Poster
- Posts: 1830
- Joined: Wed Jun 10, 2015 4:30 pm
- Year: 18 300 xmax
- Color: White
- Location: Fort lauderdale
- Contact:
Re: oil level on stick
Oil capacities have nothing to do wth the right amt of oil...why?
Because everyone leaves some in the bike and it's always different.
The proper amount of oil is putting in 3 oz via syringe until it reads mid stick.
Because everyone leaves some in the bike and it's always different.
The proper amount of oil is putting in 3 oz via syringe until it reads mid stick.
Glen
‘15 PCX build thread here:
https://www.hondapcx.org/viewtopic.php?f=2&t=4640
Current: ‘18 XMAX 300 & ‘22 NAVI
‘15 PCX build thread here:
https://www.hondapcx.org/viewtopic.php?f=2&t=4640
Current: ‘18 XMAX 300 & ‘22 NAVI