installing new, big Honda wind screen on your Forza

Cosmetic accessories, comfort accessories, windshields, luggage racks, etc.

Moderator: Modsquad

User avatar
fish
Forum Benefactor
Forum Benefactor
Posts: 2497
Joined: Mon Jul 21, 2014 3:18 pm
Location: rural Ohio

installing new, big Honda wind screen on your Forza

Post by fish »

This fellow has very helpful instuctions for removing the panel to fit the bigger Honda screen on your forza.
http://myforza300.wordpress.com/2013/09 ... 0/#more-18
SECoda
Honda Forza 300 &
Honda Forza 300 &
Posts: 1312
Joined: Tue Aug 26, 2014 2:49 pm
Location: USA

Re: installing new, big Honda wind screen on your Forza

Post by SECoda »

Cool. Thanks. I picked up the Givi Tall but that will do.
User avatar
Vesper2112
New Member
New Member
Posts: 49
Joined: Mon Sep 15, 2014 7:41 am
Year: 2014 Forza
Color: Red
Location: Chattanooga, TN
Contact:

Re: installing new, big Honda wind screen on your Forza

Post by Vesper2112 »

That's exactly the site I went to when putting my Givi tall on. Wish he'd do more updates.
SECoda
Honda Forza 300 &
Honda Forza 300 &
Posts: 1312
Joined: Tue Aug 26, 2014 2:49 pm
Location: USA

Re: installing new, big Honda wind screen on your Forza

Post by SECoda »

I don't think I spent more than 30 minutes putting the Givi on my PCX. Is the Forza a bit more difficult?
User avatar
fish
Forum Benefactor
Forum Benefactor
Posts: 2497
Joined: Mon Jul 21, 2014 3:18 pm
Location: rural Ohio

Re: installing new, big Honda wind screen on your Forza

Post by fish »

SECoda wrote:I don't think I spent more than 30 minutes putting the Givi on my PCX. Is the Forza a bit more difficult?
It is a real tug to get these yellow plugs out of the holes they are clipped into.
Loosen the bottom, then pull out a little and down.
Image

Image

The 2 yellow plugs clip into these holes...one on each side Image

I buttered them up with silicone grease for next time!

Probably not a good idea to try this if the plastic is cold.
Fish
SECoda
Honda Forza 300 &
Honda Forza 300 &
Posts: 1312
Joined: Tue Aug 26, 2014 2:49 pm
Location: USA

Re: installing new, big Honda wind screen on your Forza

Post by SECoda »

Ah! I see. Thanks. There is probably nothing in the service manual on this.
User avatar
fish
Forum Benefactor
Forum Benefactor
Posts: 2497
Joined: Mon Jul 21, 2014 3:18 pm
Location: rural Ohio

Re: installing new, big Honda wind screen on your Forza

Post by fish »

SECoda wrote:Ah! I see. Thanks. There is probably nothing in the service manual on this.
The manual has a microscopic drawing of arrows, lines and a thing that could be a tab and a hole it goes in.....over there....
This is page one, step one for taking the whole scooter apart...."Remove.... by releasing the following....."
The "releasing" is the magic part.
This is why BRed's exploded scooter pix are so impressive to me! He "released" practically everydamthing! Just for the heck-of-it!
An AMAZING feat of daring!
Fish
SECoda
Honda Forza 300 &
Honda Forza 300 &
Posts: 1312
Joined: Tue Aug 26, 2014 2:49 pm
Location: USA

Re: installing new, big Honda wind screen on your Forza

Post by SECoda »

I just suffered through this again. For future folks the problem is the red tab on the bottom front that the bolt goes through has a larger hole so that the black bottom piece protrudes up into that hole where the bottom bolt goes up. You must release the red tab off of the black nub sticking up through the hole. You can't just pull it out or you may break the tab off. You must come at it from the back and pry the red tab up. Then it falls out.

The side tabs are minor compared to that.
SECoda
Honda Forza 300 &
Honda Forza 300 &
Posts: 1312
Joined: Tue Aug 26, 2014 2:49 pm
Location: USA

Re: installing new, big Honda wind screen on your Forza

Post by SECoda »

Little Givi and Big Givi.
20141129_170841web.jpg
20141129_170841web.jpg (106.63 KiB) Viewed 2543 times
Post Reply