Exhaust Cover

[you you]

Paint yer fork legs matt black

[Alibally]

Ali, looks nice! Is it stainless steel? Do you think it will fit the 2015 exhaust?
Did you see the one that raroboy just linked us too? It's S.S. What do you think about that one? At least it's available here in the U.S.

Yeah Josh! Ya like those golden wheels? Sharp heh?

It's aluminium. It's a Honda part I think. The cover looks a different shape on the 2015 but no doubt the blingtastic bits will not be far away.

[kramnala58]

Ali, looks nice! Is it stainless steel? Do you think it will fit the 2015 exhaust?
Did you see the one that raroboy just linked us too? It's S.S. What do you think about that one? At least it's available here in the U.S.

WN - I am fairly certain that the ones shown will not fit the 2015 ... at least the 2015's I have seen in Thailand as the inlay pattern is different.

[jojo87]

Well the plastic around the Bolt snapped on mine lol so only 1 Bolt holding it on at the moment,
I asked the Seller about returning for a refund and they basically just said they'll send another out,
which is fine by me....
pretty sure glue and a washer to fit perfect in the gap would of worked but a new one is not bad :-)

[jojo87]

The ones on BikerBitz... cant seem to purchase them?

[jojo87]

Oh yeah, I got the same one as Alibally, found one for £15 which I thought was good :-)

[SECoda]

BikerBitz was Out of Stock when I tried to order one.

[Kenno]

Was that from webike? Looks really good. Anyone know if it will fit the 2014/2015 model?

[jojo87]

I think it was eBay :-/

I was seeing them for around £40 like this one:
http://www.ebay.co.uk/itm/GENUINE-HONDA ... 27eb9797b8

so when I seen it so cheap, I had to get it!!
i'm pretty sure it was eBay, I cant remember.

[homie]

That's a nice piece of tin you guys found there... does anyone know what's bolted off the muffler brackets in this pic?

[Kenno]

Thanks JoJo I'll keep an eye out for one.
Homie, looks like it might be this Bikers exhaust cover (or something similar)?..
http://www.bikerzbits.com/honda-pcx125- ... ikers.html

[homie]

Thanks JoJo I'll keep an eye out for one.
Homie, looks like it might be this Bikers exhaust cover (or something similar)?..
http://www.bikerzbits.com/honda-pcx125- ... ikers.html

no... them big rubber bumpers off the exhaust mount LOL

[SECoda]

One of these maybe or all of them. lol I think they are anodized aluminum.

http://www.powerbypcx.com/achat-axe-de- ... 97232.html
http://www.powerbypcx.com/achat-embouts ... 11275.html
http://www.powerbypcx.com/achat-embout- ... 79915.html

[kramnala58]

... does anyone know what's bolted off the muffler brackets in this pic?

Yes, it is my PCX. Here is a link to some pics elsewhere on the forums. I have swapped it out again for a modified stock one. I trimmed the end of the stock one off so that I could leave the end-cap on it and then put a white trim piece on it. Here's some before and after pics.

The piece underneath the exhaust is a skid bar to protect the exhaust if I ever lay in down.

http://hondapcx.org/viewtopic.php?f=4&t=1273

This is the previous cover I was using that you were asking about.

PCX 009 A_800x600.jpg (85.75 KiB) Viewed 1078 times

This is what it looks like now.

Kramnala58 PCX Exhaust.jpg (111.57 KiB) Viewed 1078 times

[kramnala58]

Was that from webike? Looks really good. Anyone know if it will fit the 2014/2015 model?

The 2014/15 is a different design, so it won't fit.