Ignition key difficulties
Moderator: Modsquad
Ignition key difficulties
Is anyone finding difficulties with their ignition key sticking in the barrel?
Mine has happened a couple of times and the key seems to be jammed and only by a little gentle manipulation will it move forward or backwards.
Other than a spray of wd40 I really can't think of any solution for it
Mine has happened a couple of times and the key seems to be jammed and only by a little gentle manipulation will it move forward or backwards.
Other than a spray of wd40 I really can't think of any solution for it
- Alibally
- Official Moderator
- Posts: 1761
- Joined: Thu Nov 03, 2011 5:47 pm
- Year: 2019
- Color: Black
- Location: Edinburgh, Scotland
Re: Ignition key difficulties
You could use wd40 but it can collect dirt and make it worse. Locksmiths recommend a dry graphite powder. A spray is available in maplin.
It's best not to be too liberal with it though as it might get into the electrical part if the switch.
If it's a forsa you have gn2 was saying his was sticking as well. Maybe there's a issue with them.
It's best not to be too liberal with it though as it might get into the electrical part if the switch.
If it's a forsa you have gn2 was saying his was sticking as well. Maybe there's a issue with them.
Re: Ignition key difficulties
Mine has occasionally been stiff but wd40 fixed it.
Four decades on two wheels has taught me nothing, all advice given is guaranteed to be wrong
- WhiteNoise
- Official Moderator
- Posts: 8784
- Joined: Mon Nov 07, 2011 11:15 pm
- Year: 2015 PCX 150esp
- Color: Pearl *White*
- Location: L.I. N.Y.
Re: Ignition key difficulties
This or this or this should work. Put a bit "on the key" itself and insert several times (keep paper towel handy)
http://www.amazon.com/Panef-Corp-Powder ... 959W5N7Q0Z
http://www.amazon.com/Master-Lock-2300D ... =lock+ease
http://www.amazon.com/American-Grease-S ... =lock+ease
http://www.amazon.com/Panef-Corp-Powder ... 959W5N7Q0Z
http://www.amazon.com/Master-Lock-2300D ... =lock+ease
http://www.amazon.com/American-Grease-S ... =lock+ease
Location, Year & Color - Please enter Yours today!
How? Log in. Click the User Control Panel button (top right of any page). Upon destination, click Profile in left column. Look >See the questions? Please Complete. We Thank You
How? Log in. Click the User Control Panel button (top right of any page). Upon destination, click Profile in left column. Look >See the questions? Please Complete. We Thank You
- you you
- What's a wot?
- Posts: 10000
- Joined: Sat Jun 30, 2012 5:37 pm
- Location: Between Lulu and Chichi
Re: Ignition key difficulties
Pfft gumph frrrt hehegn2 wrote:Mine has occasionally been stiff but wd40 fixed it.
- willajabir
- Regular User
- Posts: 320
- Joined: Mon Nov 25, 2013 6:41 pm
- Location: Gardendale, AL, USA
Re: Ignition key difficulties
you you wrote:Pfft gumph frrrt hehegn2 wrote:Mine has occasionally been stiff but wd40 fixed it.
I wanted to say something first, but I was laughing so hard at what I wanted to say, I had tears in my eyes!!!!!!!!!
Larry
2014 NSS300E born on 12/11/13
May the Forza be with you
my Forza pics: http://tinyurl.com/o9hqc4o
2014 NSS300E born on 12/11/13
May the Forza be with you
my Forza pics: http://tinyurl.com/o9hqc4o
Re: Ignition key difficulties
It gets stiff quite regularly, when wd40 doesn't do the trick my wife fixes it for me.
She knows all kinds of tricks to take the stiffness away.
She knows all kinds of tricks to take the stiffness away.
Four decades on two wheels has taught me nothing, all advice given is guaranteed to be wrong
Re: Ignition key difficulties
Mine would sometimes stick to the first position (fuel door/seat) when turning it. I tried oiling the lock cylinder but what really worked was to use a wire wheel machine at work to de-burr the key.
10-20 seconds was all it needed.
10-20 seconds was all it needed.
Previous - 1986 Honda Elite 250, 2007 Ninja 500r, 2013 Honda PCX-150
Current - 2015 Honda CBR650F
Current - 2015 Honda CBR650F
-
- Forum Benefactor
- Posts: 2857
- Joined: Sun Dec 29, 2013 11:43 pm
- Year: 2014 125 (LED)
- Color: White
- Location: London, England
Re: Ignition key difficulties
The new 2014 PCX has new keys (according to the deaker) - not sure what the difference is or what the original looked like.
- WhiteNoise
- Official Moderator
- Posts: 8784
- Joined: Mon Nov 07, 2011 11:15 pm
- Year: 2015 PCX 150esp
- Color: Pearl *White*
- Location: L.I. N.Y.
Re: Ignition key difficulties
look to the obvious. I missed that one. Easy fix.Slickvic wrote:Mine would sometimes stick to the first position (fuel door/seat) when turning it. I tried oiling the lock cylinder but what really worked was to use a wire wheel machine at work to de-burr the key.
10-20 seconds was all it needed.
Location, Year & Color - Please enter Yours today!
How? Log in. Click the User Control Panel button (top right of any page). Upon destination, click Profile in left column. Look >See the questions? Please Complete. We Thank You
How? Log in. Click the User Control Panel button (top right of any page). Upon destination, click Profile in left column. Look >See the questions? Please Complete. We Thank You
Re: Ignition key difficulties
Got some of the powder and it works a treat - thanks for the link!WhiteNoise wrote:This or this or this should work. Put a bit "on the key" itself and insert several times (keep paper towel handy)
http://www.amazon.com/Panef-Corp-Powder ... 959W5N7Q0Z
http://www.amazon.com/Master-Lock-2300D ... =lock+ease
http://www.amazon.com/American-Grease-S ... =lock+ease