Does anyone know the correct torque setting for the rear wheel hub nut.??
Cheere
Rear wheel
Moderator: Modsquad
-
maddiedog
- Benevolent Overlord
- Posts: 3640
- Joined: Tue Nov 01, 2011 7:04 pm
- Year: 2011
- Color: White
- Location: New Mexico
- Contact:
Re: Rear wheel
According to the Honda service manual:
118 N/m (12.0 kgf*m, 87 lbf*ft)
118 N/m (12.0 kgf*m, 87 lbf*ft)
Currently ride: 2011 Honda PCX 125 - Upgraded windshield and seat, keeping this one mostly stock
Previously rides: 2005 V-Strom DL650, 1974 Vespa Ciao, 2011 Honda PCX 170 (tons of mods - takegawa 170cc big bore kit, gears, etc), 1996 Honda Nighthawk 250, 1987 Honda Spree, 2000 KTM 125SX, 2003 Honda Silverwing, 2007 Genuine Buddy 125, 1998 Honda PC800, 2008 Buddy 125 (white), 2008 Buddy 125 (red), 2001 Honda Reflex, 1987 Honda Elite, 1988 Honda Spree, 2007 Yamaha Vino, 2007 Honda Metro, 2x 125cc pure-chinesium dirt bikes
Previously rides: 2005 V-Strom DL650, 1974 Vespa Ciao, 2011 Honda PCX 170 (tons of mods - takegawa 170cc big bore kit, gears, etc), 1996 Honda Nighthawk 250, 1987 Honda Spree, 2000 KTM 125SX, 2003 Honda Silverwing, 2007 Genuine Buddy 125, 1998 Honda PC800, 2008 Buddy 125 (white), 2008 Buddy 125 (red), 2001 Honda Reflex, 1987 Honda Elite, 1988 Honda Spree, 2007 Yamaha Vino, 2007 Honda Metro, 2x 125cc pure-chinesium dirt bikes
-
edscoot
- Regular User
- Posts: 313
- Joined: Fri Nov 11, 2011 3:55 pm
- Location: Province of Almeria, Spain, for now.
- Contact:
Re: Rear wheel
You'll need a longish torque wrench for it too, and a 24mm socket.
Tighten the nut a good bit while the scooters on it's centre stand, then take it off the stand while standing to it's left, this will mean you can apply the rear brake and lean your weight over the bike while you torque the nut. I might be teaching my grandmother to suck eggs here.
Tighten the nut a good bit while the scooters on it's centre stand, then take it off the stand while standing to it's left, this will mean you can apply the rear brake and lean your weight over the bike while you torque the nut. I might be teaching my grandmother to suck eggs here.
-
Why did I touch that
- New Member
- Posts: 7
- Joined: Tue Feb 28, 2012 5:35 pm
Re: Rear wheel
Any advice is good advice thanks