Buzzer for the turn signals..

[ozzy7007]

I have put together a buzzer with parts from RadioShack, need access to the rear tail lights, does anyone know how to get at the tail lights wiring. , also I have the parts list and wiring diagram if anyone is interested, I will be using the type of connectors that allow you to tap into existing wiring without any damage to the wires.. If interested, I will post parts list etc..Ozzy

[FritzPinguin]

I did it the easy way and replaced the relay with one which has an integrated buzzer, these are available in many bikeshops here. Cost is about three bucks.

[ozzy7007]

Hey, thanks, that sounds much better, all I have to do now is find a dealer that has them, Thanks again for the reply, Ozzy

[SmellyTofu]

Do you have a photo of the relay? I'm about to scotch lock some buzzer on the indicator wiring itself but changing the relay might be a cleaner way to do it.

[ozzy7007]

I will post pics of Buzzer and the wire taps, I used to use scotch locks, now that I discovered these wire taps, I am sold on them, Ozzy

[Gossamer]

I did it the easy way and replaced the relay with one which has an integrated buzzer, these are available in many bikeshops here. Cost is about three bucks.

Hi Fritz, I'm keen on replacing the indicator relay with one with a buzzer as I tend to leave my indicators on. Where is the relay on the PCX? Cheers.

[you you]

I will post pics of Buzzer and the wire taps, I used to use scotch locks, now that I discovered these wire taps, I am sold on them, Ozzy

Scotchlocks are ok but they should only be temporary. What are wire taps?

[Alibally]

I will post pics of Buzzer and the wire taps, I used to use scotch locks, now that I discovered these wire taps, I am sold on them, Ozzy

What are wire taps?

It's what the FBI use on a sting.
Don't use scotch locks they are rubbish. Purely a temporarily measure only.

[you you]

I will post pics of Buzzer and the wire taps, I used to use scotch locks, now that I discovered these wire taps, I am sold on them, Ozzy

What are wire taps?

It's what the FBI use on a sting.
Don't use scotch locks they are rubbish. Purely a temporarily measure only.

That's what I said. Ok to test things and then solder and use shrinkytube. I love shrinkytube

[Alibally]

I use http://www.autoelectricsupplies.co.uk/p ... category/9
They are are a good reliable water tight way of repairing wiring.

[Gossamer]

I too love electrical shrink tubing. To get a waterproof joint, I run hot melt adhesive along the soldered joint first, then apply the heat shrink. Little fiddly but works for me.

[kramnala58]

I did it the easy way and replaced the relay with one which has an integrated buzzer, these are available in many bikeshops here. Cost is about three bucks.

Do you know if there are specific relays for each model of bike or are they universal?