Page 3 of 6

Re: 2015 Honda PCX150 Black Metallic (Performance informatio

Posted: Sat Jul 29, 2017 8:45 am
by Heedehcheenuh
homie wrote:I'm counting on Chief to design this special NCY variator face tool... come on Chief you can do it.
I hope to have something done today. My R.A. hit me bad the past few days and I have been out of commission. Both hands are the size of softball gloves and it take just about all day to get them down so I can pick up a cup of coffee much less turn a wrench lol. :oops: What I will make will be simple to use and anyone can make it from material from any hardware store. I May even make a video on how to use the tool. I am still trying to figure out how to post images here........ :( .


Heedehcheenuh
Chuck D
Ride on.....

Re: 2015 Honda PCX150 Black Metallic (Performance informatio

Posted: Sat Jul 29, 2017 9:20 am
by homie
Heedehcheenuh wrote:
homie wrote:I'm counting on Chief to design this special NCY variator face tool... come on Chief you can do it.
I hope to have something done today. I May even make a video on how to use the tool. I am still trying to figure out how to post images here........ :(
That's GREAT Chief! Sorry about the arthritis, I have the myalgia but do whatever it takes to keep inflammation down and push on. Yes I was thinking common over the counter bits from the hardware store could fashion something like this if you're up for the walk about. I actually enjoy (like you) going on the scavenger hunt. I have a tendency to put things in my pockets when hands are full but the store security knows this and gives me the full walk to the vehicle before they get excited apparently. The last time I realized halfway to the car I had stuff in my jacket pocket and went back the service desk to confess the clerk said security was right behind me and laughed. Now one of managers smiles as I exit check out "anything in the pockets today?" embarrassing but funny :oops: those ceiling cams are real I guess.

I will give you instruction on resizing and posting pictures and if you have a youtube account embedding vids into this forum is easy.

Re: 2015 Honda PCX150 Black Metallic (Performance informatio

Posted: Sat Jul 29, 2017 9:37 am
by Heedehcheenuh
homie wrote:
Heedehcheenuh wrote:
homie wrote:I'm counting on Chief to design this special NCY variator face tool... come on Chief you can do it.
I hope to have something done today. I May even make a video on how to use the tool. I am still trying to figure out how to post images here........ :(
That's GREAT Chief! Sorry about the arthritis, I have the myalgia but do whatever it takes to keep inflammation down and push on. Yes I was thinking common over the counter bits from the hardware store could fashion something like this if you're up for the walk about. I actually enjoy (like you) going on the scavenger hunt. I have a tendency to put things in my pockets when hands are full but the store security knows this and gives me the full walk to the vehicle before they get excited apparently. The last time I realized halfway to the car I had stuff in my jacket pocket and went back the service desk to confess the clerk said security was right behind me and laughed. Now one of managers smiles as I exit check out "anything in the pockets today?" embarrassing but funny :oops: those ceiling cams are real I guess.

I will give you instruction on resizing and posting pictures and if you have a youtube account embedding vids into this forum is easy.
Yeah I have a youtube account. Charles D Wilson it is the one with the 2017 Tao Tao Powermax 150cc VIP owner. I have 4 videos up and getting set to do some Honda PCX videos when I get to feeling better. If you look at the first video ( https://youtu.be/tEtDyKi9cpo ) you should be able to see my messed up hands a little lol. My right hand is the worst.

Heedehcheenuh
Chuck D
Ride on.....

Re: 2015 Honda PCX150 Black Metallic (Performance informatio

Posted: Sat Jul 29, 2017 11:09 am
by homie
I subscribed, and here's just one way to get pictures on the board.

With smart phone take nice pic and mail to self then move to folder on computer.
In a windows based computer use 'paint program' to crop, resize image to around 600 by 400 pixels or less.
When you click post/reply have at least 10 characters in the text block or you will get red ink prompting you to do so.
Choose that filed/resized/renamed image and click preview. You can also delete it anytime from your user control panel. Not just after the expired edit post time.

hope this does it for you...

Re: 2015 Honda PCX150 Black Metallic (Performance informatio

Posted: Fri Sep 01, 2017 6:42 am
by Heedehcheenuh
Update. OK no pictures or tool yet. But I do now have the windscreen (short) and NCY kit installed.. She has reached 73pmh gps (70mph speedo) and I let off of her. She has more but what I need is there now. The new Leo Vince GPS Silencer exhaust will be here next week. The fuel millage is holding 97.7mpg currently and hope the taller rear tire (next year) will finish her for the good long enjoyable runs.


Heedehcheenuh
Chuck D
Ride on.....

Re: 2015 Honda PCX150 Black Metallic (Performance informatio

Posted: Fri Sep 01, 2017 4:06 pm
by Heedehcheenuh
Short ride today. Passed my son on his CBR600F4 running 70mph. We had fun and a good laugh. Love my boy.


Heedehcheenuh
Chuck D
Ride on.....

Re: 2015 Honda PCX150 Black Metallic (Performance informatio

Posted: Fri Sep 01, 2017 5:49 pm
by homie
Heedehcheenuh wrote:Short ride today. Passed my son on his CBR600F4 running 70mph. We had fun and a good laugh. Love my boy.


YAY!!! :lol: :lol: :lol:

Re: 2015 Honda PCX150 Black Metallic (Performance informatio

Posted: Fri Sep 01, 2017 6:23 pm
by Heedehcheenuh
homie wrote:
Heedehcheenuh wrote:Short ride today. Passed my son on his CBR600F4 running 70mph. We had fun and a good laugh. Love my boy.


YAY!!! :lol: :lol: :lol:
I am getting the Leo Vince GP exhaust next week and hope it helps it a little more. She will fly now with no holding back. I may sneak out oneday and see if she will hit 75mph before I do the exhaust. I have read that I need to remove the battery cable and let the computer remap with the new exhaust. Hope to get some good results.

Heedehcheenuh
Chuck D
Ride on.....

Re: 2015 Honda PCX150 Black Metallic (Performance informatio

Posted: Sat Sep 02, 2017 12:22 am
by Gil
You know what you are doing. Sendler had posted that the 13 gram weights with the NCY variator kit would put the engine at peak power at 65 MPH, as I remember it. My scoot will do 65 MPH most days, unless a headwind or sidewind or a hill or cold temperature present themselves. From other member post here, the City Grips have more rolling resistance. So, they will slow down your scoot a bit. Just keep that in mind. Lookup Sendler's post on it. Here is his modding thread from ecomodder.com.

http://ecomodder.com/forum/showthread.p ... 25820.html

Re: 2015 Honda PCX150 Black Metallic (Performance informatio

Posted: Sat Sep 02, 2017 6:58 am
by Heedehcheenuh
Gil wrote:You know what you are doing. Sendler had posted that the 13 gram weights with the NCY variator kit would put the engine at peak power at 65 MPH, as I remember it. My scoot will do 65 MPH most days, unless a headwind or sidewind or a hill or cold temperature present themselves. From other member post here, the City Grips have more rolling resistance. So, they will slow down your scoot a bit. Just keep that in mind. Lookup Sendler's post on it. Here is his modding thread from ecomodder.com.

http://ecomodder.com/forum/showthread.p ... 25820.html
Thanks . The trick to rolling resistance is to go 5lbs more pressure than what the tire calls for. I do not do twisty rides (Old and with my disability it is easier to just ride). Yes it may wear the center of the tire out faster in some cases but then again I am not doing the tire smoking jack rabbit starts either. I am getting ready to hit 5.000 miles and still have half the tread left on the stock tires. The only spinning burnouts I have done was wet grass or sand but those do not count lol.

Heedehcheenuh
Chuck D
Ride on.....

Re: 2015 Honda PCX150 Black Metallic (Performance informatio

Posted: Sun Sep 03, 2017 3:50 pm
by Heedehcheenuh
Photos/pics added. Hope these work.
Heedehcheenuh
Chuck D
Ride on.....

Re: 2015 Honda PCX150 Black Metallic (Performance informatio

Posted: Tue Sep 05, 2017 10:55 am
by PCX150Rider
How's the new windshield working out for you?

Thanks for sharing the pics. . .. :D

Re: 2015 Honda PCX150 Black Metallic (Performance informatio

Posted: Tue Sep 05, 2017 11:09 am
by homie
Yes! great pics Chief, and good job tooling your own scoot. Why don't you knock that long tail off and clean up her profile. It's an easy and pleasant mod. We don't need the extended tuxedo tail in the states to mount our plates.

Go Chief go!
http://www.hondapcx.org/viewtopic.php?f ... l&start=20

Re: 2015 Honda PCX150 Black Metallic (Performance informatio

Posted: Tue Sep 05, 2017 12:51 pm
by WhiteNoise
Someone say Chief? :D

Tonto, Kemosahbee, Custer....Apache
Jump on it! - SugarHill Gang (1981?)


The original....

Apache - The Shadows (1960)

Re: 2015 Honda PCX150 Black Metallic (Performance informatio

Posted: Tue Sep 05, 2017 1:47 pm
by Heedehcheenuh
homie wrote:Yes! great pics Chief, and good job tooling your own scoot. Why don't you knock that long tail off and clean up her profile. It's an easy and pleasant mod. We don't need the extended tuxedo tail in the states to mount our plates.

Go Chief go!
http://www.hondapcx.org/viewtopic.php?f ... l&start=20
I may be performing the stretch kit. It would look like a sport bike/scooter. I have to save up the money to get it but maybe worth it for the looks. The link has pics/photos of the kit installed. The price is up there but you only live once.
https://japan.webike.net/products/22643 ... X_20160805

Smile team she is working out fine. I wish my old disabled butt would get in gear. There are days I can get somethings done then have to take 2-3 days to recover smh.

Heedehcheenuh
Chuck D
Ride on.....

Re: 2015 Honda PCX150 Black Metallic (Performance informatio

Posted: Tue Sep 05, 2017 1:52 pm
by Heedehcheenuh
WhiteNoise wrote:Someone say Chief? :D

Tonto, Kemosahbee, Custer....Apache
Jump on it! - SugarHill Gang (1981?)


The original....

Apache - The Shadows (1960)
More along the lines of this lol This is a local tribe near me. great drummers.
https://youtu.be/OgDSQg7KPq8
https://youtu.be/91LRgFmgVaU

Heedehcheenuh
Chuck D
Ride on....

Re: 2015 Honda PCX150 Black Metallic (Performance informatio

Posted: Tue Sep 05, 2017 2:45 pm
by PCX150Rider
More along the lines of this lol This is a local tribe near me. great drummers.
Serious energy. . .. ;)

Re: 2015 Honda PCX150 Black Metallic (Performance informatio

Posted: Tue Sep 05, 2017 3:19 pm
by homie
Heedehcheenuh wrote:
homie wrote:Yes! great pics Chief, and good job tooling your own scoot.
Go Chief go!
I wish my old disabled butt would get in gear. There are days I can get somethings done then have to take 2-3 days to recover smh.
I feel your pain, I flare with this stupid Fibromyalgia every few weeks. Good news is medical science has kept pace with MY inevitable geriatrics and 3 new treatments are inbound in the next few years if approved by the FDA ... SO CHIN UP CHIEF maybe something for you too.

Here was a discovery I made recently that people have found out themselves who have FM that made perfect sense to me. Vibration therapy helps numb the arthritis type pain o_O I immediately understood my addiction to riding everyday either on a bumpy PCX or a V-twin harley engine under my azz. I hadn't made the connection prior to hearing about vibration therapy treatments for Fibromyalgia. I wonder how the hell they do it? :lol:

Re: 2015 Honda PCX150 Black Metallic (Performance informatio

Posted: Tue Sep 05, 2017 4:34 pm
by Heedehcheenuh
Now hitting the rev limiter at 75mph lol That's all I need then. She will pull the hills and rides like a boss.

Heedehcheenuh
Chuck D
Ride on.....

Re: 2015 Honda PCX150 Black Metallic (Performance informatio

Posted: Fri Sep 08, 2017 11:49 am
by Heedehcheenuh
OK team. Prepping for the oil change. I want to use the Rotella Full Synthetic 10-20w/30w/40w and a small amount of Lucas Oil Stabilizer. What are your thoughts. Temps here in South Carolina (USA) stay in the ranges that 0 temp rate will be to low so 10 will do. 20-30-40 on weight with right at 5,000 miles so 20w if I can find it. Oil stabilizer to help coat the bearings and parts for wear and tear. Let me know what you think.


Heedehcheenuh
Chuck D
Ride on.....