NCY transmission kit

Drivetrain upgrades, engine upgrades, or any other mods to gain speed or acceleration.

Moderator: Modsquad

scooter steve
Forum Benefactor
Forum Benefactor
Posts: 44
Joined: Thu Oct 09, 2014 3:05 pm
Year: 2013
Color: white
Location: ellesmere port England

NCY transmission kit

Post by scooter steve »

Hi I fitted the NYC super transmission kit and a new belt the acceleration has improved but the top speed of 65mph remains any ideas guys I was expecting a little faster
scooter steve
Forum Benefactor
Forum Benefactor
Posts: 44
Joined: Thu Oct 09, 2014 3:05 pm
Year: 2013
Color: white
Location: ellesmere port England

Re: NCY transmission y

Post by scooter steve »

Oh it's a 2013 UK spec 125 esp
User avatar
Mel46
Forum Benefactor
Forum Benefactor
Posts: 6959
Joined: Tue Nov 13, 2012 5:13 pm
Year: 2013
Color: red PCX
Location: Dallas, Ga USA

Re: NCY transmission kit

Post by Mel46 »

Did you change the rollers and drive face? I replaced my rollers with 13 gm rollers. I haven't changed out the drive face yet. What was the top speed before you changed everything out? You can't expect too much of a change from a little scooter. I have a 150 cc vs your 125 cc. As I understand it on mine, changing the variator, drive face, and rollers will give me perhaps 10 mph increase in top end. That is about it unless you do something drastic to it.
Currently own:
Red 2013 Honda PCX150

Givi tall windshield & tailbox - Lots of extra lights
Custom seat from Thailand - Bad Boy Airhorn
Takegawa Lowering Shocks - Michelin City Grip Tires
Headlight assy upgraded to LEDs w/HS5 main bulbs
NCY variator, drive face, and rollers
scooter steve
Forum Benefactor
Forum Benefactor
Posts: 44
Joined: Thu Oct 09, 2014 3:05 pm
Year: 2013
Color: white
Location: ellesmere port England

Re: NCY transmission kit

Post by scooter steve »

I changed everything in the super transmission kit variator rollers drive face 13g weights clutch and bell and spring all so honda drive belt acceleration is a lot better just same top speed
User avatar
homie
Prestige
Prestige
Posts: 6103
Joined: Sat Sep 06, 2014 12:49 pm
Year: 2015 PCX150
Color: Pearl White
Location: FloridaLand

Re: NCY transmission kit

Post by homie »

scooter steve wrote:I changed everything in the super transmission kit variator rollers drive face 13g weights clutch and bell and spring all so honda drive belt acceleration is a lot better just same top speed
That kit wasn't so super was it... here is what you needed for 78 mph on stock rubber, with the 13 gram rollers, I didn't like the 12's https://www.youtube.com/watch?v=-NRc9g3Dasw
scooter steve
Forum Benefactor
Forum Benefactor
Posts: 44
Joined: Thu Oct 09, 2014 3:05 pm
Year: 2013
Color: white
Location: ellesmere port England

Re: NCY transmission kit

Post by scooter steve »

That's what I have fitted so here is the killer question how can I get 70 mph + I all so fitted the clutch
scooter steve
Forum Benefactor
Forum Benefactor
Posts: 44
Joined: Thu Oct 09, 2014 3:05 pm
Year: 2013
Color: white
Location: ellesmere port England

Re: NCY transmission kit

Post by scooter steve »

The kit I have fitted
Attachments
FB_IMG_1455911075040.jpg
FB_IMG_1455911075040.jpg (61.69 KiB) Viewed 3679 times
User avatar
homie
Prestige
Prestige
Posts: 6103
Joined: Sat Sep 06, 2014 12:49 pm
Year: 2015 PCX150
Color: Pearl White
Location: FloridaLand

Re: NCY transmission kit

Post by homie »

scooter steve wrote:That's what I have fitted so here is the killer question how can I get 70 mph + I all so fitted the clutch
If you have the items in the video, you can't install rollers incorrectly into that setup and if your belt is the proper one that only leaves the clutch. I have never replaced the clutch on PCX so I have no idea if that is were you are losing the speed. With a stock clutch and those NYC items and the right belt you should easily get 70+ mph with the 2013's even with oversized tires. Is your speedo wacked? Use your phones GPS to see actual speed. Is your RPM what it should be?
scooter steve
Forum Benefactor
Forum Benefactor
Posts: 44
Joined: Thu Oct 09, 2014 3:05 pm
Year: 2013
Color: white
Location: ellesmere port England

Re: NCY transmission kit

Post by scooter steve »

The clutch is fitted correct as it can pull little wheel spins lol the Speedo is good as it worked before and after the only thing it can be is belt I fitted a new honda belt but there is allways the possibility i the wrong belt I.e part number I kept my old belt I'm going to put it on tomorrow and road test my tyres are standard size
User avatar
homie
Prestige
Prestige
Posts: 6103
Joined: Sat Sep 06, 2014 12:49 pm
Year: 2015 PCX150
Color: Pearl White
Location: FloridaLand

Re: NCY transmission kit

Post by homie »

Hope that's gets you up to speed... your 2013 is faster than my 2015 given all parts are the same. I installed the NYC products you see in the vid but kept the stock clutch and belt. I can just get to 70 on a good downhill BECAUSE I have the biggest tires you can fit on stock PCX rims. I could fly if I put the spindly IRC's back on but 68 is fast enough for me 8) https://www.youtube.com/watch?v=5EQ6MHoIYAo

wait you have a 125cc ?
User avatar
Alibally
Official Moderator
Official Moderator
Posts: 1761
Joined: Thu Nov 03, 2011 5:47 pm
Year: 2019
Color: Black
Location: Edinburgh, Scotland

Re: NCY transmission kit

Post by Alibally »

Is it the correct belt? If it was slightly small it would not reach the top of the pulley.
It's worth checking but probably a long shot.
Image
scooter steve
Forum Benefactor
Forum Benefactor
Posts: 44
Joined: Thu Oct 09, 2014 3:05 pm
Year: 2013
Color: white
Location: ellesmere port England

Re: NCY transmission kit

Post by scooter steve »

I'm thinking it's the wrong belt as I got it of ebay now what is the part number of all of the belts because I thought I ordered the correct size I know there are three sizes dependant on year I fitted the correct year size
User avatar
Alibally
Official Moderator
Official Moderator
Posts: 1761
Joined: Thu Nov 03, 2011 5:47 pm
Year: 2019
Color: Black
Location: Edinburgh, Scotland

Re: NCY transmission kit

Post by Alibally »

Have you still got the old belt? If it's in reasonable condition refit it and see what speed you get. Is the part number still readable on it if you have it?
Image
User avatar
Alibally
Official Moderator
Official Moderator
Posts: 1761
Joined: Thu Nov 03, 2011 5:47 pm
Year: 2019
Color: Black
Location: Edinburgh, Scotland

Re: NCY transmission kit

Post by Alibally »

The part number I get is
23100-KZR-601

That's for a 2013 WW125D

Check the chassis number to verify this.


http://www.bike-parts-honda.com/pieces- ... X+125.html
Image
scooter steve
Forum Benefactor
Forum Benefactor
Posts: 44
Joined: Thu Oct 09, 2014 3:05 pm
Year: 2013
Color: white
Location: ellesmere port England

Re: NCY transmission kit

Post by scooter steve »

Yep that's the belt I fitted just measured against old belt there the same size
User avatar
homie
Prestige
Prestige
Posts: 6103
Joined: Sat Sep 06, 2014 12:49 pm
Year: 2015 PCX150
Color: Pearl White
Location: FloridaLand

Re: NCY transmission kit

Post by homie »

now I'm curious how that aftermarket clutch is dragging the anchor... whats your plan?
Image
scooter steve
Forum Benefactor
Forum Benefactor
Posts: 44
Joined: Thu Oct 09, 2014 3:05 pm
Year: 2013
Color: white
Location: ellesmere port England

Re: NCY transmission kit

Post by scooter steve »

I stripped it down today it all looked ok but the clutch bell face was a bit iffy not smooth so I am going to 're fit original clutch and spring and take it from there oh the joys of scooter tinkerage
User avatar
Alibally
Official Moderator
Official Moderator
Posts: 1761
Joined: Thu Nov 03, 2011 5:47 pm
Year: 2019
Color: Black
Location: Edinburgh, Scotland

Re: NCY transmission kit

Post by Alibally »

Does it hit the rev limiter or just run out of puff?
Image
scooter steve
Forum Benefactor
Forum Benefactor
Posts: 44
Joined: Thu Oct 09, 2014 3:05 pm
Year: 2013
Color: white
Location: ellesmere port England

Re: NCY transmission kit

Post by scooter steve »

Just runs out of puff will hit 83 on the stand rev limits kicks in at 72 down a big hill
User avatar
homie
Prestige
Prestige
Posts: 6103
Joined: Sat Sep 06, 2014 12:49 pm
Year: 2015 PCX150
Color: Pearl White
Location: FloridaLand

Re: NCY transmission kit

Post by homie »

I think that will do it... whilst we wait for the refit I've done a little tooling on the vespa, hows it look? She will do 160 on the flats :D
Attachments
Vespa-600.jpg
Vespa-600.jpg (68.29 KiB) Viewed 3608 times
Vespa-600 2.jpg
Vespa-600 2.jpg (61.91 KiB) Viewed 3608 times
Post Reply