NCY transmission kit

Drivetrain upgrades, engine upgrades, or any other mods to gain speed or acceleration.

Moderator: Modsquad

scooter steve
Forum Benefactor
Forum Benefactor
Posts: 44
Joined: Thu Oct 09, 2014 3:05 pm
Year: 2013
Color: white
Location: ellesmere port England

Re: NCY transmission kit

Post by scooter steve »

Sweet now that's exactly what I need
scooter steve
Forum Benefactor
Forum Benefactor
Posts: 44
Joined: Thu Oct 09, 2014 3:05 pm
Year: 2013
Color: white
Location: ellesmere port England

Re: NCY transmission kit

Post by scooter steve »

So I have taken the clutch and reinstalled the original clutch the old girl is ok 68mph as an average the weather is not the best at the moment so I carat go for a big run out so I'm gonna crack some beers cheers y'all
Brent
Forum Benefactor
Forum Benefactor
Posts: 109
Joined: Thu Feb 19, 2015 1:24 pm
Year: 2015
Color: White
Location: St. George, UT, USA (3,000 feet elevation)

Re: NCY transmission kit

Post by Brent »

Homie, my PCX hit 68mph when it was new last year. Now with 7,400 miles on it its top speed is 60. What would you suggest to get it back up to 68? Everything is stock on the engine. Brent!
User avatar
homie
Prestige
Prestige
Posts: 6103
Joined: Sat Sep 06, 2014 12:49 pm
Year: 2015 PCX150
Color: Pearl White
Location: FloridaLand

Re: NCY transmission kit

Post by homie »

Brent wrote:Homie, my PCX hit 68mph when it was new last year. Now with 7,400 miles on it its top speed is 60. What would you suggest to get it back up to 68? Everything is stock on the engine. Brent!
Last years PCX's could never do 68mph stock... 64 was your top end. Do you still have the stock size tires? Have you been hanging around the donut shop? Maybe you could use a new set of rollers, those would be 16gram rollers in a stock 2015 PCX. Wow you do ride yours a lot, I will look at the service manual for 8k things to check out.
User avatar
homie
Prestige
Prestige
Posts: 6103
Joined: Sat Sep 06, 2014 12:49 pm
Year: 2015 PCX150
Color: Pearl White
Location: FloridaLand

Re: NCY transmission kit

Post by homie »

Between 5k and 7.5k you had a lot of things to (clean, inspect, adjust, lubricate or replace) in the emissions related column. They are as follows and any of these could be dragging your anchor but remember you are only running 4 mph slower then a new stock 2016 PCX.

drive belt (inspect & clean) page 3-15
clutch shoe wear (inspect) page 3-23
fuel line (inspect) page 3-6
throttle operation (adjust) page 3-6
crankcase breather (clean) page 3-8
spark plug (should have been replaced at 5k) page 3-9
evaporative emission control system (if you have one) page 3-15

Of course fluids would be screaming if not maintained but wouldn't be slowing you down but stopping you, engine oil, coolant, final drive oil.
Then there is that last ditch thing that probably has nothing to do with speed but would be causing excessive engine noise...
Valve clearance inspection and adjustment page 3-10
Brent
Forum Benefactor
Forum Benefactor
Posts: 109
Joined: Thu Feb 19, 2015 1:24 pm
Year: 2015
Color: White
Location: St. George, UT, USA (3,000 feet elevation)

Re: NCY transmission kit

Post by Brent »

Sweet Homie! Thank you very much! I will check into those items.
User avatar
k2apache6.0
Forum Benefactor
Forum Benefactor
Posts: 507
Joined: Thu Apr 21, 2016 9:03 am
Year: 2013
Color: Red
Location: Fort Lauderdale, FL

Re: NCY transmission kit

Post by k2apache6.0 »

So this is a 125 or a 150?
My PCX mod build here..
http://www.hondapcx.org/viewtopic.php?f=7&t=7113
User avatar
Mel46
Forum Benefactor
Forum Benefactor
Posts: 6959
Joined: Tue Nov 13, 2012 5:13 pm
Year: 2013
Color: red PCX
Location: Dallas, Ga USA

Re: NCY transmission kit

Post by Mel46 »

Change the belt and rollers and your speed will go back up. Put 13 gram rollers in when you change the belt for a new one, and you will be impressed.
Currently own:
Red 2013 Honda PCX150

Givi tall windshield & tailbox - Lots of extra lights
Custom seat from Thailand - Bad Boy Airhorn
Takegawa Lowering Shocks - Michelin City Grip Tires
Headlight assy upgraded to LEDs w/HS5 main bulbs
NCY variator, drive face, and rollers
Post Reply