Hi,
was hoping someone here has a workshop manual. Would like to know the torque settings for tightening up the variator and clutch nuts (and also the large 39mm one on the clutch - but figure that one is a tight as you can).
Going to change the rollers and clutch torque spring. Not urgent as some of the bits are on back order so I have to wait several weeks before I get them. Cheers,
Nobody.
Anyone with a Workshop Manual?
Moderator: Modsquad
-
maddiedog
- Benevolent Overlord
- Posts: 3640
- Joined: Tue Nov 01, 2011 7:04 pm
- Year: 2011
- Color: White
- Location: New Mexico
- Contact:
Re: Anyone with a Workshop Manual?
Even if someone had a digital manual, it couldn't be posted because that would violate US copyright law: http://hondapcx.org/viewtopic.php?f=3&t=17#p22
Luckily, me or other members with the physical copy can upload snippets under "fair use" conditions without violating copyright law. I still recommend getting one, they're quite affordable, but below are all the torque settings provided by Honda (look on 1-11, under Drive Pulley/Driven Pulley/Clutch):
Luckily, me or other members with the physical copy can upload snippets under "fair use" conditions without violating copyright law. I still recommend getting one, they're quite affordable, but below are all the torque settings provided by Honda (look on 1-11, under Drive Pulley/Driven Pulley/Clutch):
- 1-10.jpg (310.12 KiB) Viewed 1558 times
- 1-11.jpg (263.78 KiB) Viewed 1558 times
- 1-12.jpg (290.63 KiB) Viewed 1558 times
- 1-13.jpg (181.7 KiB) Viewed 1558 times
Currently ride: 2011 Honda PCX 125 - Upgraded windshield and seat, keeping this one mostly stock
Previously rides: 2005 V-Strom DL650, 1974 Vespa Ciao, 2011 Honda PCX 170 (tons of mods - takegawa 170cc big bore kit, gears, etc), 1996 Honda Nighthawk 250, 1987 Honda Spree, 2000 KTM 125SX, 2003 Honda Silverwing, 2007 Genuine Buddy 125, 1998 Honda PC800, 2008 Buddy 125 (white), 2008 Buddy 125 (red), 2001 Honda Reflex, 1987 Honda Elite, 1988 Honda Spree, 2007 Yamaha Vino, 2007 Honda Metro, 2x 125cc pure-chinesium dirt bikes
Previously rides: 2005 V-Strom DL650, 1974 Vespa Ciao, 2011 Honda PCX 170 (tons of mods - takegawa 170cc big bore kit, gears, etc), 1996 Honda Nighthawk 250, 1987 Honda Spree, 2000 KTM 125SX, 2003 Honda Silverwing, 2007 Genuine Buddy 125, 1998 Honda PC800, 2008 Buddy 125 (white), 2008 Buddy 125 (red), 2001 Honda Reflex, 1987 Honda Elite, 1988 Honda Spree, 2007 Yamaha Vino, 2007 Honda Metro, 2x 125cc pure-chinesium dirt bikes
Re: Anyone with a Workshop Manual?
Excellent! Thanks for that maddiedog. Should get a manual, figure I can do most of the servicing myself.
Cheers.
Cheers.