Installed Daytona Windshield RS

Cosmetic accessories, comfort accessories, windshields, luggage racks, etc.

Moderator: Modsquad

User avatar
Gil
Frequent Poster
Frequent Poster
Posts: 623
Joined: Mon Nov 09, 2015 10:20 pm
Year: 2013
Color: black
Location: Watsonville, CA

Installed Daytona Windshield RS

Post by Gil »

I was looking for an ideal windshield that would deflect the wind away from my helmet and have very low wind rushing noise and wind buffeting, the wind slapping on the helmet. I was hoping that this windshield would work because of its mounting location and how close it is to the rider. I didn't want a windshield that was too far forward as it introduces wind turbulence that is quite load when it hits the helmet. I did a short highway run and I'm quite happy with the results. And, I would say that it performs quite admirably in deflecting the wind from my helmet. There is a low sound of wind buffeting happening away from the helmet and some wind noise at the top gap of my helmets shield. I can duck a little down and forward and i'll be in a quiet pocket of calm air. I'm 5'8 and the height of the windshield is at my nose level. I'll add some daytime pictures tomorrow.

https://japan.webike.net/products/23464675.html
Attachments
install (1).png
install (1).png (1.02 MiB) Viewed 1117 times
Daytona0.jpg
Daytona0.jpg (763.77 KiB) Viewed 1117 times
Daytona.jpg
Daytona.jpg (723.77 KiB) Viewed 1117 times
ImageImage
  • 2013 Honda PCX 150, NCY Variator kit, Dr Pulley 13g Roller weights
  • IRC and City Grip tires, LED driving lights, Coroplast top box, MFR exhaust, Daytona Windshield.
User avatar
you you
What's a wot?
What's a wot?
Posts: 10000
Joined: Sat Jun 30, 2012 5:37 pm
Location: Between Lulu and Chichi

Re: Installed Daytona Windshield RS

Post by you you »

Looks different. Brackets means you can add extra bits and bobs if that is your bag.

Not ideal for me as it seems to mount the mirrors further inboard?
User avatar
raito
Regular User
Regular User
Posts: 153
Joined: Tue Mar 01, 2016 8:58 am
Year: 2015
Color: matte silver
Location: Brunei

Re: Installed Daytona Windshield RS

Post by raito »

Interesting windshield. I have the Givi D1136ST and I am quite happy with it, but I am only 5'6" so I wonder maybe this taller windshield would be nicer.
Givi D1136ST Daytona RS resized.png
Givi D1136ST Daytona RS resized.png (289.27 KiB) Viewed 1110 times
ImageImageImage
User avatar
Gil
Frequent Poster
Frequent Poster
Posts: 623
Joined: Mon Nov 09, 2015 10:20 pm
Year: 2013
Color: black
Location: Watsonville, CA

Re: Installed Daytona Windshield RS

Post by Gil »

you you wrote:Looks different. Brackets means you can add extra bits and bobs if that is your bag.

Not ideal for me as it seems to mount the mirrors further inboard?
You are correct, there is more hardware used to install this windshield. I don't mind so much as the hardware isn't too cumbersome.
I do like the look of the windshield, doesn't look too out of place.
You are right about the mirrors they do mount in a bit, but also a inch or so higher up. Didn't notice much difference with them mounted like that.
I still see my arms in the mirrors.

Gil
ImageImage
  • 2013 Honda PCX 150, NCY Variator kit, Dr Pulley 13g Roller weights
  • IRC and City Grip tires, LED driving lights, Coroplast top box, MFR exhaust, Daytona Windshield.
User avatar
Gil
Frequent Poster
Frequent Poster
Posts: 623
Joined: Mon Nov 09, 2015 10:20 pm
Year: 2013
Color: black
Location: Watsonville, CA

Re: Installed Daytona Windshield RS

Post by Gil »

raito wrote:Interesting windshield. I have the Givi D1136ST and I am quite happy with it, but I am only 5'6" so I wonder maybe this taller windshield would be nicer.
Givi D1136ST Daytona RS resized.png

I used my hand as a probe to feel where the air was flowing. The air seems to be thrown up just enough to not hit the helmet shield, but does start to hit my helmet at the top edge of the helmet shield, a soft blowing of air. Around the side of the windshield there is a bit of turbulence, but it isn't hitting the helmet. Some wind does hit my shoulders. My main goal with a windshield was for it too be quiet, as I have sensitive ears 'tinnitus'. I use earplugs, as I ride at 60 mph + for half of my commute.
Also, there is absolutely no wind hitting my neck, so wind noise from that area has been eliminated.

Gil
ImageImage
  • 2013 Honda PCX 150, NCY Variator kit, Dr Pulley 13g Roller weights
  • IRC and City Grip tires, LED driving lights, Coroplast top box, MFR exhaust, Daytona Windshield.
User avatar
PCX150Rider
Frequent Poster
Frequent Poster
Posts: 1832
Joined: Tue Jan 17, 2017 1:56 pm
Year: 2017
Color: White
Location: Old Saybrook, CT

Re: Installed Daytona Windshield RS

Post by PCX150Rider »

Interesting. . .. :)

I think the upside would be that you could remove it somewhat easily for the warmer season and then reinstall it later on when the weather starts to cool down again. Just have to loosen some hold downs instead of removing the front panels.

How long do you think it would take to uninstall it? And reinstall it another time? :geek:
User avatar
you you
What's a wot?
What's a wot?
Posts: 10000
Joined: Sat Jun 30, 2012 5:37 pm
Location: Between Lulu and Chichi

Re: Installed Daytona Windshield RS

Post by you you »

Just looks a matter of removing the two bolts and replacing the mirrors? 5 mins?

Looks a good alternative to the usual screen.
User avatar
Gil
Frequent Poster
Frequent Poster
Posts: 623
Joined: Mon Nov 09, 2015 10:20 pm
Year: 2013
Color: black
Location: Watsonville, CA

Re: Installed Daytona Windshield RS

Post by Gil »

PCX150Rider wrote:Interesting. . .. :)

I think the upside would be that you could remove it somewhat easily for the warmer season and then reinstall it later on when the weather starts to cool down again. Just have to loosen some hold downs instead of removing the front panels.

How long do you think it would take to uninstall it? And reinstall it another time? :geek:
The windshield deflects the wind from hitting my chest and most of my helmet, but some wind still blows in at the bottom corners of the windshield. Nothing major though. Their Daytona SS windshield looks for for summer. It looks like it would deflect wind from the chest, but not the helmet.
There are a couple of different size windshields available that can be purchase separately, they are sold as replacements.
Install was quick, 10-20 min.

you you wrote:Just looks a matter of removing the two bolts and replacing the mirrors? 5 mins?

Looks a good alternative to the usual screen.
I think you are correct, It should be that easy.

Gil
ImageImage
  • 2013 Honda PCX 150, NCY Variator kit, Dr Pulley 13g Roller weights
  • IRC and City Grip tires, LED driving lights, Coroplast top box, MFR exhaust, Daytona Windshield.
User avatar
WhiteNoise
Official Moderator
Official Moderator
Posts: 8784
Joined: Mon Nov 07, 2011 11:15 pm
Year: 2015 PCX 150esp
Color: Pearl *White*
Location: L.I. N.Y.

Re: Installed Daytona Windshield RS

Post by WhiteNoise »

Well....that's definitely a new approach to PCX world windscreens. Instead of removing PCX screen, we add to it. Interesting. But, those mirrors? They just got closer...and it ain't because of me oversized body getting in the way :lol: Not this time! :lol:
All kidding aside, I kinda like the idea. Doesn't look bad either. If it works for you? Then Why Not view thru it!
Cheers to another windscreen choice. Thanks for sharing those pics too! Cool 8)
Location, Year & Color - Please enter Yours today!
How? Log in. Click the User Control Panel button (top right of any page). Upon destination, click Profile in left column. Look >See the questions? Please Complete. We Thank You
User avatar
kramnala58
Mod Emeritus
Mod Emeritus
Posts: 2864
Joined: Sun Jun 09, 2013 7:49 am
Color: White is faster
Location: Niagara Falls, USA

Re: Installed Daytona Windshield RS

Post by kramnala58 »

I tried another model of add-on windscreen but it was at a complete wrong angle so I took it off almost immediately. If I had known about this one, I may have tried it. I had replaced the OEM windscreen with an accessory one that I really liked (see my profile pic) and I didn't want to replace it.
2010 Honda PCX 125 in Thailand (White) - "White Lightning" Sold in Sept 2017 :(
2009 Yamaha Majesty YP400 in USA (Metalic Titanium) - "The Throne" Sold in June 2020 :(
User avatar
Gil
Frequent Poster
Frequent Poster
Posts: 623
Joined: Mon Nov 09, 2015 10:20 pm
Year: 2013
Color: black
Location: Watsonville, CA

Re: Installed Daytona Windshield RS

Post by Gil »

kramnala58 wrote:I tried another model of add-on windscreen but it was at a complete wrong angle so I took it off almost immediately. If I had known about this one, I may have tried it. I had replaced the OEM windscreen with an accessory one that I really liked (see my profile pic) and I didn't want to replace it.
I like the white "windscreen" that you have on, makes it look modded. I use earplugs with 18 decibel reduction, they work great and I can still hear traffic. I think it's a good compromise not too big and blocks most of the air hitting the helmet. Below 50 mph it quite comfortable to ride with it. Above 55 mph it start to get louder, but not like before. I haven't gotten pics of it installed yet, I hope to make some time today. I thought I should share since no one else has one on here. It also looked like what Electri Terry had on his aero Electric motorcycle.

Electric Terrys ride :https://insideevs.com/electric-terry-he ... ne-charge/
Attachments
Craig vetter fairing with Electric Terry as the pilot.
Craig vetter fairing with Electric Terry as the pilot.
10636064_651212531641221_8204415512649663982_n.jpg (56.58 KiB) Viewed 1002 times
18 decibel reduction in sound..
18 decibel reduction in sound..
alpine-motosafe-tour-package.jpg (23.85 KiB) Viewed 1002 times
ImageImage
  • 2013 Honda PCX 150, NCY Variator kit, Dr Pulley 13g Roller weights
  • IRC and City Grip tires, LED driving lights, Coroplast top box, MFR exhaust, Daytona Windshield.
Post Reply