The Honda PCX / Forza / ADV150 / SH Forums

Honda OEM fluids & other recommended products

Motor Oil - http://www.amazon.com/gp/product/B0039L ... UTF8&psc=1

Brake fluid - http://www.amazon.com/gp/product/B0039O ... UTF8&psc=1

Shaft drive oil - http://www.amazon.com/gp/product/B0039O ... UTF8&psc=1

Coolant - http://www.amazon.com/gp/product/B0039O ... UTF8&psc=1

Spark plug - http://www.amazon.com/gp/product/B001RM ... UTF8&psc=1

Trim Clips (2015+) - http://www.amazon.com/gp/product/B00842 ... UTF8&psc=1
---------------------------------------

Nice to have on hand - from Amazon!

Balance beads - http://www.amazon.com/gp/product/B00CUN ... UTF8&psc=1

Tie down gear - http://www.amazon.com/gp/product/B0013L ... UTF8&psc=1

Reflective tape - http://www.amazon.com/gp/product/B002VY ... UTF8&psc=1

Touch up paint (white) - http://www.amazon.com/gp/product/B00OYL ... UTF8&psc=1

Cargo net - http://www.amazon.com/gp/product/B0022Z ... UTF8&psc=1
-----------------------------------------

Performance parts & video gear on Amazon!

Tachometer - http://www.amazon.com/gp/product/B0041Q ... UTF8&psc=1

13 gram rollers - http://www.amazon.com/gp/product/B00L3I ... UTF8&psc=1

Sport Mirrors - http://www.amazon.com/gp/product/B00FMM ... UTF8&psc=1

Mobius action cam - http://www.amazon.com/gp/product/B00H91 ... UTF8&psc=1
------------------------------------------

Decent decals on Amazon

Honda wings - http://www.amazon.com/gp/product/B004NY ... UTF8&psc=1

Eagle USA - http://www.amazon.com/gp/product/B00KM2 ... UTF8&psc=1
-----------------------------------------

Other items that were great purchases for my PCX

Service Manual (2013-2015) - http://www.helminc.com/helm/product2.as ... itemtype=N

NCY drive face - http://www.corsportusa.com/2010-honda-p ... rive-face/

NCY teflon pulley - http://www.corsportusa.com/2010-honda-p ... on-pulley/

NCY 13g rollers - http://www.corsportusa.com/2010-honda-p ... ights-13g/

City Grip rear - http://www.motorcycle-superstore.com/28 ... -rear-tire

City Grip front - http://www.motorcycle-superstore.com/28 ... front-tire

Oil drain/filter kit - http://www.ebay.com/itm/Oil-Screen-Filt ... 01&vxp=mtr
----------------------------------------

I've purchased the items above mostly from Amazon without any surprises or disappointment for my 2015 Honda PCX.
If you can find it on Amazon why pay more Hope this is helpful to new members.

Nice!

I bought my Service Manual from here. It was $41 after shipping.

E X C E L L E N T Thread homie!! Or as 2yous would say, "Brilliant!"

Stuff I've ordered for my '13 PCX150:

Handlebar clock: http://www.amazon.com/gp/product/B00S4L ... UTF8&psc=1
Commentary: Chrome look fits in real nice with the rest of the handlebar area.

Mirror extensions (need 2 of these, both left-hand threaded): http://www.amazon.com/gp/product/B003VB ... UTF8&psc=1
Commentary: A must-have for most PCX riders, especially taller or larger folk like myself

Cell phone holder: http://www.amazon.com/gp/product/B00FQJ ... UTF8&psc=1
Commentary: Sits in VERY nice in middle of handlebar, has a much lower profile than many other photos I've seen. You'll have to unscrew the handlebar mounts a little and lift the handlebar up about 1/4 inch to fit the clip underneath (then it just goes back where it was). The "ends" of the under-handlebar-mount thing are kind of fat.

WhiteNoise wrote:E X C E L L E N T Thread homie!! Or as 2yous would say, "Brilliant!"

Hmm, brilliant?

Brill?


Can I use awesome?


Useful thread

I'm on Amazon now

That handle bar clock beckons me... don't need a clock but dang ... it's so shiny, and waterproof! Wonder how much trouble the battery is?

Do you have a picture of that clock installed on a pcx? I just wonder if it would fit in the middle of the handlebar. At the moment i have a $1watch from a Dollar Store. It works but doesn't keep accurate time, and i end up replacing it every 6 months or so. I think i would rather have one that looks good and can handle weather.

Luckily the 2015's have a clock built in to the dash

Mel46 wrote:Do you have a picture of that clock installed on a pcx? I just wonder if it would fit in the middle of the handlebar. At the moment i have a $1watch from a Dollar Store. It works but doesn't keep accurate time, and i end up replacing it every 6 months or so. I think i would rather have one that looks good and can handle weather.

OK, here's my pic of the clock (BONUS: the pic also shows the phone holder too) as mounted. The clock is actually larger than the amazon link makes you think it is. (and yes.... SHINY....). The mount is very strong, and allows you to place the clock on top or bottom.. and yes, I *think* it would fit in the middle, but with my phone holder there now I can't verify that. Take a gamble? Really well made IMO. If it doesn't fit in the middle, it does work well where I have it........

For the other person that asked-- the clock itself actually pops in the round frame, and is held in place by a tiny recessed hex screw. To change the battery, you just unscrew the tiny screw, and the whole clock pops out. (then just pry the back off the clock and replace battery like any small clock or watch...).

There are a few other clocks on amazon, but I tried one and the mount didn't work very well. THIS mount, the one that completely encases the handlebar, is the best. It comes with a cheap chunk of clear plastic hose stuff to fit the gap for the thinner (PCX) handlebar. That didn't work well enough in my opinion and I just used a piece or two of bicycle tire. Easy enough, and keeps the chrome handlebar protected.

Just realized that was a pretty bad photo as the close angle makes the clock look *HUGE*. oops. (does show the mount quite nicely tho).

Here's a better shot. Almost forgot--- this pic shows the nifty mirror extensions too........... Enjoy.

you you wrote:I'm on Amazon now

Awesome!

Homie - Your list of things that DIDN'T work is also a valuable resource.

Thanks for taking the trouble to put the links all together, and hopefully creating a thread that we all can find, use, and add to.

Be nice if this was a sticky post.

Your links for "NCY drive face" and "NCY teflon pulley" say "2010+ HONDA PCX 125" in the product description. I assume they are the same for the 150's?

mtheall wrote:Your links for "NCY drive face" and "NCY teflon pulley" say "2010+ HONDA PCX 125" in the product description. I assume they are the same for the 150's?

To my limited knowledge reading this forum 125 and 150cc Honda PCX's use the same transmission components since at least 2010.

Great items, I would only add: https://www.amazon.com/gp/aw/d/B00DSPEFZ0/ref=yo_ii_img
That is the Honda OEM adapter plate for installing top cases. If I am not mistaken works for models 2013 and 2015 (USA). Don't know if it would work with other years / models.

I ordered these 3 the other day from: https://www.rockymountainatvmc.com/?byp ... eSite=true They arrived today via FedEx

Note: 3 Day Shipping 48 States. Shipping for above was only $7.00. I'm glad I ordered all of them at once, else the shipping cost would've been $7.00 each order. My total cost was $28.97.
So....think about What Else You Need before clicking "checkout."

If you spend $99.00 you get....."A Free Ride"

WhiteNoise wrote:I ordered these 3 the other day from: https://www.rockymountainatvmc.com/?byp ... eSite=true

20150930_124848-1_resized.jpg

They arrived today via FedEx

Note: 3 Day Shipping 48 States. Shipping for above was only $7.00. I'm glad I ordered all of them at once, else the shipping cost would've been $7.00 each order. My total cost was $28.97.
So....think about What Else You Need before clicking "checkout."

If you spend $99.00 you get....."A Free Ride"

How many miles have you put on your scooter now?

Oh I forgot the all time BEST amazon purchase for msyelf! Probably because I never ever experience fogging in my helmet since I installed it. WHAT A NO BRAINER product and Amazon has the best price if they have your custom fit Pinlock. Yes these are helmet manufacturer specific, so you newbies please read before you order.

http://www.amazon.com/gp/product/B00H08 ... 1_1&sr=8-1