Givi Screen Fitment

Maintenance, guides, and walkthroughs for your PCX. Please do not post questions about repairing or fixing your bike here.

Moderator: Modsquad

Chapel77
Regular User
Regular User
Posts: 72
Joined: Thu Nov 24, 2016 4:08 pm
Year: 2016
Color: Red
Location: United Kingdom

Givi Screen Fitment

Post by Chapel77 »

Recently fitted a new screen to PCX, a couple of members asked for description and / or photos, so here goes.....
Attachments
Standard screen as fitted. Found it a bit too low, so purchased a Givi screen.
Standard screen as fitted. Found it a bit too low, so purchased a Givi screen.
Givi Screen (3).JPG (187.14 KiB) Viewed 4981 times
Living the Honda Dream!
Chapel77
Regular User
Regular User
Posts: 72
Joined: Thu Nov 24, 2016 4:08 pm
Year: 2016
Color: Red
Location: United Kingdom

Re: Givi Screen Fitment

Post by Chapel77 »

To remove screen, the two screws under the screen need to be removed to be able to take off the screen. I used a cross head screwdriver with a long, thin shaft so not to scratch up the grill.
Attachments
Givi Screen (4).JPG
Givi Screen (4).JPG (192.79 KiB) Viewed 4981 times
Living the Honda Dream!
Chapel77
Regular User
Regular User
Posts: 72
Joined: Thu Nov 24, 2016 4:08 pm
Year: 2016
Color: Red
Location: United Kingdom

Re: Givi Screen Fitment

Post by Chapel77 »

Once the screws have ben removed, place your fingers on the grill with your thumbs on the headlight and pull backwards and downwards. It takes a little force initially, but once the tabs release the grill comes off easily. I did watch a video on YouTube which showed the bloke using a plastic tool to go around the grill pulling it away from the headlight, not needed and a good chance of scratching everything up and snapping the tabs.
Attachments
Givi Screen (6).JPG
Givi Screen (6).JPG (182.46 KiB) Viewed 4982 times
Living the Honda Dream!
Chapel77
Regular User
Regular User
Posts: 72
Joined: Thu Nov 24, 2016 4:08 pm
Year: 2016
Color: Red
Location: United Kingdom

Re: Givi Screen Fitment

Post by Chapel77 »

Once the grill is removed, two bolts are exposed on each side.
Attachments
Givi Screen (8).JPG
Givi Screen (8).JPG (257.97 KiB) Viewed 4982 times
Living the Honda Dream!
Chapel77
Regular User
Regular User
Posts: 72
Joined: Thu Nov 24, 2016 4:08 pm
Year: 2016
Color: Red
Location: United Kingdom

Re: Givi Screen Fitment

Post by Chapel77 »

10mm socket with extension so not to scratch the bodywork, all four bolts came off easily.
Attachments
Givi Screen (10).JPG
Givi Screen (10).JPG (248.91 KiB) Viewed 4981 times
Living the Honda Dream!
Chapel77
Regular User
Regular User
Posts: 72
Joined: Thu Nov 24, 2016 4:08 pm
Year: 2016
Color: Red
Location: United Kingdom

Re: Givi Screen Fitment

Post by Chapel77 »

Once the four bolts are removed the screen easily bends and comes off these four silver retainers. When the screen was removed I took the chance to clean this area as it is impossible to do so with a screen in place.
Attachments
Givi Screen (15).JPG
Givi Screen (15).JPG (268.58 KiB) Viewed 4982 times
Living the Honda Dream!
Chapel77
Regular User
Regular User
Posts: 72
Joined: Thu Nov 24, 2016 4:08 pm
Year: 2016
Color: Red
Location: United Kingdom

Re: Givi Screen Fitment

Post by Chapel77 »

Serial and product reference number. The screen came bubble wrapped in a huge cardboard box with further protective stuff. Daughter had great fun turning the box into a funhouse to play in!!!
Attachments
Givi Screen (18).JPG
Givi Screen (18).JPG (248.76 KiB) Viewed 4982 times
Living the Honda Dream!
Chapel77
Regular User
Regular User
Posts: 72
Joined: Thu Nov 24, 2016 4:08 pm
Year: 2016
Color: Red
Location: United Kingdom

Re: Givi Screen Fitment

Post by Chapel77 »

Screen unwrapped and inspected prior to fitment.
Attachments
Givi Screen (20).JPG
Givi Screen (20).JPG (374.13 KiB) Viewed 4984 times
Living the Honda Dream!
Chapel77
Regular User
Regular User
Posts: 72
Joined: Thu Nov 24, 2016 4:08 pm
Year: 2016
Color: Red
Location: United Kingdom

Re: Givi Screen Fitment

Post by Chapel77 »

Screen fitted in place, two holes on each side of the screen marry up to the silver retainers on the scooter, original bolts refitted. Lined up perfectly and took seconds to clip in place.
Attachments
Givi Screen (21).JPG
Givi Screen (21).JPG (216.68 KiB) Viewed 4983 times
Living the Honda Dream!
Chapel77
Regular User
Regular User
Posts: 72
Joined: Thu Nov 24, 2016 4:08 pm
Year: 2016
Color: Red
Location: United Kingdom

Re: Givi Screen Fitment

Post by Chapel77 »

Grill put back in and screwed in place. Takes a bit jiggling around and care has to be taken so not to scratch the headlight, but once lined up it slots back really easily.

From start to finished the whole job took about 15 minutes, including taking photos, without the photos, 8-10 minutes.

Really easy job with only a screwdriver and 10mm socket / wrench needed.

Hope this thread is of use to someone!
Attachments
Givi Screen (24).JPG
Givi Screen (24).JPG (225.65 KiB) Viewed 4980 times
Living the Honda Dream!
User avatar
homie
Prestige
Prestige
Posts: 6103
Joined: Sat Sep 06, 2014 12:49 pm
Year: 2015 PCX150
Color: Pearl White
Location: FloridaLand

Re: Givi Screen Fitment

Post by homie »

NICE!... tell me you don't have to put the big LOSER decal on that, it would ruin the plastic.
Attachments
mac4.jpg
mac4.jpg (12.71 KiB) Viewed 4976 times
Image
Chapel77
Regular User
Regular User
Posts: 72
Joined: Thu Nov 24, 2016 4:08 pm
Year: 2016
Color: Red
Location: United Kingdom

Re: Givi Screen Fitment

Post by Chapel77 »

Legally yes, but............
Living the Honda Dream!
davenowherejones
Frequent Poster
Frequent Poster
Posts: 1817
Joined: Sat Jun 20, 2015 12:06 pm
Year: 2014
Color: Silver
Location: Hope, BC, Canada

Re: Givi Screen Fitment

Post by davenowherejones »

Nice but it is in the Forza section by mistake.
User avatar
homie
Prestige
Prestige
Posts: 6103
Joined: Sat Sep 06, 2014 12:49 pm
Year: 2015 PCX150
Color: Pearl White
Location: FloridaLand

Re: Givi Screen Fitment

Post by homie »

Chapel77 wrote:Legally yes, but............
Somebody needs to run over a pot hole, crash and blame it on lack of visibility. Don't you people have any lawyers over there? Heck if you trip over an irregular side walk there's a lawyer to take your case here.
Image
User avatar
homie
Prestige
Prestige
Posts: 6103
Joined: Sat Sep 06, 2014 12:49 pm
Year: 2015 PCX150
Color: Pearl White
Location: FloridaLand

Re: Givi Screen Fitment

Post by homie »

davenowherejones wrote:Nice but it is in the Forza section by mistake.
:lol: I'm not the only one who screws this up. Admin, just rename the board index hehe

I propose color difference, PCX can remain minty green and 4Z can go with something else.... homie fixed!
Image
Chapel77
Regular User
Regular User
Posts: 72
Joined: Thu Nov 24, 2016 4:08 pm
Year: 2016
Color: Red
Location: United Kingdom

Re: Givi Screen Fitment

Post by Chapel77 »

homie wrote:
Chapel77 wrote:Legally yes, but............
Somebody needs to run over a pot hole, crash and blame it on lack of visibility. Don't you people have any lawyers over there? Heck if you trip over an irregular side walk there's a lawyer to take your case here.
The angle of the photo doesn't help, but obviously it's not in the line of sight. Will probably attach a hard 'L' plate to my front fork.

Agree they are not the most aesthetically pleasing things to have on your scooter, but they do serve a purpose. Have two years to decide if I want to keep my PCX, as our CBT lasts for that period. Will probably do my test, if not can repeat CBT. Also have a car and a garage full of bikes so I'm in no rush to decide.
Living the Honda Dream!
Chapel77
Regular User
Regular User
Posts: 72
Joined: Thu Nov 24, 2016 4:08 pm
Year: 2016
Color: Red
Location: United Kingdom

Re: Givi Screen Fitment

Post by Chapel77 »

davenowherejones wrote:Nice but it is in the Forza section by mistake.
Damn it!!!

Any moderator fancy putting it in the correct section???
Living the Honda Dream!
User avatar
homie
Prestige
Prestige
Posts: 6103
Joined: Sat Sep 06, 2014 12:49 pm
Year: 2015 PCX150
Color: Pearl White
Location: FloridaLand

Re: Givi Screen Fitment

Post by homie »

I like your parking area :D
Image
User avatar
Alibally
Official Moderator
Official Moderator
Posts: 1761
Joined: Thu Nov 03, 2011 5:47 pm
Year: 2019
Color: Black
Location: Edinburgh, Scotland

Re: Givi Screen Fitment

Post by Alibally »

Chapel77 wrote:
davenowherejones wrote:Nice but it is in the Forza section by mistake.
Damn it!!!

Any moderator fancy putting it in the correct section???

Moved to pcx Technical Help, "how-to" section.
Image
Chapel77
Regular User
Regular User
Posts: 72
Joined: Thu Nov 24, 2016 4:08 pm
Year: 2016
Color: Red
Location: United Kingdom

Re: Givi Screen Fitment

Post by Chapel77 »

Alibally wrote:
Chapel77 wrote:
davenowherejones wrote:Nice but it is in the Forza section by mistake.
Damn it!!!

Any moderator fancy putting it in the correct section???

Moved to pcx Technical Help, "how-to" section.
Thank you sir, you are a gentleman!
Living the Honda Dream!
Post Reply