Hello, I bought my forza in october but unlike the PCX where its extremely easy to find & buy a trunk mount for, I for the life of me cannot locate one for the Forza.
Does the Forza have a buyable mount anywhere? I've attached a picture of the trunk that I have. Worked perfectly with the PCX, eager to put it on my Forza considering the bad underseat storage.
Trunk Mount?
Moderator: Modsquad
-
ajwmrr
- New Member
- Posts: 21
- Joined: Mon May 25, 2015 8:09 pm
- Year: 2014
- Color: Red Forza
- Location: Columbus Ohio
Trunk Mount?
- Attachments
-
- temp.jpg (49.22 KiB) Viewed 2423 times
-
davenowherejones
- Frequent Poster
- Posts: 1820
- Joined: Sat Jun 20, 2015 12:06 pm
- Year: 2014
- Color: Silver
- Location: Hope, BC, Canada
Re: Trunk Mount?
Try Givi. I have a Givi 65 liter case on my 2014 Honda Forza 300.
Or you can make one pretty easily with 4 bolts, spacers & flat plate. Bolt holes are there under the rear plastic, even marked on the back of the plastic. You need to drill the plastic.
Or you can make one pretty easily with 4 bolts, spacers & flat plate. Bolt holes are there under the rear plastic, even marked on the back of the plastic. You need to drill the plastic.
Re: Trunk Mount?
Or you can just leave the plastic trim piece off.davenowherejones wrote:You need to drill the plastic.
That way you can remove the rack without having to buy a new trim piece.
Four decades on two wheels has taught me nothing, all advice given is guaranteed to be wrong
-
salsa
- New Member
- Posts: 21
- Joined: Mon Oct 08, 2018 10:20 am
- Year: 2014
- Color: Forza red
- Location: South Dakota
Re: Trunk Mount?
I went to Revzilla's site, told them what bike I had, what topcase I wanted to mount and they gave me the info I needed. I ordered the mount from them and it fit beautifully (about $96 but well worth it). My topcase is a Givi monolock and the mount went right into the marked spots on the tail.