noise from back. sounds like a bearing

dadragon · Post by **dadragon** » Mon Jan 11, 2016 5:20 pm

My 8 months old forza is making a sound from the back like the bearing is not so good anymore.

Anyone also has this sound?

gn2 · Post by **gn2** » Mon Jan 11, 2016 7:18 pm

I had nasty noises from the rear and it turned out to be transmission bearings had failed.
Take it to the dealer and get them to look at it.

dadragon · Post by **dadragon** » Tue Jan 12, 2016 7:01 pm

Thanks....

dadragon · Post by **dadragon** » Fri Feb 26, 2016 4:40 pm

The dealer checked it and it was the bearing. It is now replaced.

homie · Post by **homie** » Fri Feb 26, 2016 4:45 pm

lovely ending... very nice

dadragon · Post by **dadragon** » Fri Feb 26, 2016 4:56 pm

Waranty offcourse

E. Foster Salsbury · Post by **E. Foster Salsbury** » Fri Feb 26, 2016 9:15 pm

How many kilometers/miles on the bike when the bearing was replaced dadragon and gn2?

gn2 · Post by **gn2** » Sat Feb 27, 2016 12:45 am

Think mine was around 20,000 miles or thereabouts, it was within two years anyway so was covered by warranty.

dadragon · Post by **dadragon** » Sat Feb 27, 2016 1:54 pm

16.000 km (10k miles)

E. Foster Salsbury · Post by **E. Foster Salsbury** » Sun Feb 28, 2016 11:41 am

Good to know, thanks.

SteveP · Post by **SteveP** » Sun Feb 28, 2016 12:19 pm

E. Foster Salsbury wrote:How many kilometers/miles on the bike when the bearing was replaced dadragon and gn2?

Did the dealer give any reason for the failure (dadragon & gn2)? Lack of lubrication? Error in installation? Poor quality bearing? Would be nice to know if it was a isolated problem or something we all should be aware of.

gn2 · Post by **gn2** » Sun Feb 28, 2016 12:23 pm

[quote="SteveP"]Did the dealer give any reason for the failure?/quote]

No explanation given by the dealer.
Me I think its just poor quality components.

beegmouse · Post by **beegmouse** » Mon May 09, 2016 5:02 pm

+1 on this at 14K

Grinding sound turned out to be Bearing in Clutch assy.

Same model/brand which has now been obsoleted by Honda in exchange for an NSK one.

Same bearing on PCX and SH.

Ishkabibble · Post by **Ishkabibble** » Mon May 09, 2016 9:13 pm

beegmouse wrote: Same model/brand which has now been obsoleted by Honda in exchange for an NSK one.

Same bearing on PCX and SH.

Pardon me, but this is vague.

Is the same bearing on the PCX that has now been obsoleted by Honda, or is the NSK bearing on the PCX.

Does this apply to the 2013 model?

Just curious.

beegmouse · Post by **beegmouse** » Fri May 13, 2016 6:50 am

The part causing the grinding is a common part between the Forza and PCX
Bearing 91002-GA7-702 (Fujikoshi)
has been obsoleted in favour of 91002-GA7-701 made by NTN (Not NSK, type O on my part)

91002-KPB-003 has not changed. This can also cause the grinding sound.

I have no idea when Honda stopped using the Fujikoshi bearing. But my Forza had one it was a 2013 model.

The Honda PCX / Forza / ADV150 / SH Forums

noise from back. sounds like a bearing

noise from back. sounds like a bearing

Re: noise from back. sounds like a bearing

Re: noise from back. sounds like a bearing

Re: noise from back. sounds like a bearing

Re: noise from back. sounds like a bearing

Re: noise from back. sounds like a bearing

Re: noise from back. sounds like a bearing

Re: noise from back. sounds like a bearing

Re: noise from back. sounds like a bearing

Re: noise from back. sounds like a bearing

Re: noise from back. sounds like a bearing

Re: noise from back. sounds like a bearing

Re: noise from back. sounds like a bearing

Re: noise from back. sounds like a bearing

Re: noise from back. sounds like a bearing