Trun sigal replacent/removal help. please!

[josephdeanz]

Hello all. this is my fist post to this site and just a few days after i purchased my first ever Honda pcx. the thing is that when i bought the bike (at a pretty good price) it had a smashed up turn signal that needed be replaced because the last owner had a bit of a slip up while riding apparently. so, i was hoping that i could get some help on how to remove the little bugger. it is connected to a rubber bendable piece and it is hard to unscrew the bolt with the whole thing bending the way it does. here are a couple of pictures

http://i242.photobucket.com/albums/ff22 ... e9f814.jpg

http://i242.photobucket.com/albums/ff22 ... f09fb7.jpg

anyone have a diy or just a tip that would help me take this sucker off(turn signal, like the whole thing) and replace it with the new one?

i have looked everywhere in this site and surprisingly haven't found anything written up on it.

thanks in advance.

ps: the pictures are of the right side of the bike/turn signal..i will be replacing the left turn signal not the right one as is shown in the pictures.

[dasshreddar]

Welcome, you have got to remove the cover "A" first, then it will be self explanatory, good luck!

[josephdeanz]

well i figured that much...i sent this one in to get repaired at a local shop here in town..
upon further review when i was taking the panels off today i see that he had broken a few clips and the meter cover was cracked or that one piece that covers where the handle bar connects to the bike kinda. idk...your post didn't help much really.

[maddiedog]

Glad you found better answers here: http://hondapcx.org/viewtopic.php?f=3&t ... 100#p30910