2013 PCX greasing clutch pack bearings ?

Having trouble? Need more info on something mechanical? Ask here!

Moderator: Modsquad

8milimeter
New Member
New Member
Posts: 6
Joined: Mon Jun 06, 2022 4:07 pm
Year: 2013
Color: black

2013 PCX greasing clutch pack bearings ?

Post by 8milimeter »

Since this is a know issue in the 2013 model, I was wondering if the bearings can be greased as a preventative item.

Thanks, 8mm
mymitzi
Regular User
Regular User
Posts: 266
Joined: Mon Mar 04, 2019 6:05 am
Year: 2013
Color: black
Location: Delaware

Re: 2013 PCX greasing clutch pack bearings ?

Post by mymitzi »

Yes but..........before it's noisy. Rode the PCX allot of miles....50K....before changing mine.
8milimeter
New Member
New Member
Posts: 6
Joined: Mon Jun 06, 2022 4:07 pm
Year: 2013
Color: black

Re: 2013 PCX greasing clutch pack bearings ?

Post by 8milimeter »

Repacked my bearings and sanded clutch pads today. At 2775 miles the bearing were fine, but very little grease on them, it it was almost black. Used High temp bearing grease to repack both bearings. Decided not to use excessive grease, just enough to flush the bearings. plan on inspection and repack every 2500 miles.
User avatar
pcx888
Regular User
Regular User
Posts: 171
Joined: Sat Nov 25, 2017 9:31 pm
Year: 2011
Color: pearl white
Location: Hacienda Heights, Cali

Re: 2013 PCX greasing clutch pack bearings ?

Post by pcx888 »

I just pushed out bearings and replaced with new ones. And add high temp waterproof grease.
2011 White PCX
Michelin Tire City Grip Front and Rear
Aftermarket Thai Seat.
JDM Front lights and Rear Lights and Fender.
NCY Variator, And Face and 13 Dr. pulley sliders.
Rear NCY 1000 contra spring.
NCY Textured clutch bell.
jburner
Regular User
Regular User
Posts: 115
Joined: Thu Apr 25, 2019 8:23 am
Year: 2013 PCX
Color: Black
Location: Northeast, WI

Re: 2013 PCX greasing clutch pack bearings ?

Post by jburner »

pcx888 wrote: Tue Aug 23, 2022 4:53 am I just pushed out bearings and replaced with new ones. And add high temp waterproof grease.
Any links to what bearings you replaced with or how you pushed the old ones out? Debating on repairing just bearings or getting a new face for $50
Post Reply