Traveling Over Steel Grated Bridges
Moderator: Modsquad
- PCX150Rider
- Frequent Poster
- Posts: 1832
- Joined: Tue Jan 17, 2017 1:56 pm
- Year: 2017
- Color: White
- Location: Old Saybrook, CT
Traveling Over Steel Grated Bridges
I had my first ride tonight on the PCX over a steel grated bridge a couple of times and have to say that the somewhat narrow stock IRC tires do negotiate the irregularities differently than bigger motorcycle tires. The best thing for me was to hold on tight to the grips and as the scooter wandered and searched for it's path I just took charge with a big grin. . .. The swing arm and frame did it's best to remain ridged which is what I was hoping for. Some squirming but nothing outrageous.
It was this bridge as a matter of fact. https://www.youtube.com/watch?v=lI1YI2BpGG0
The only thing worse than riding on a steel grated bridge is riding on a wet steel grated bridge.
It was this bridge as a matter of fact. https://www.youtube.com/watch?v=lI1YI2BpGG0
The only thing worse than riding on a steel grated bridge is riding on a wet steel grated bridge.
- homie
- Prestige
- Posts: 6103
- Joined: Sat Sep 06, 2014 12:49 pm
- Year: 2015 PCX150
- Color: Pearl White
- Location: FloridaLand
Re: Traveling Over Steel Grated Bridges
Some road surfaces were not thought thru for motorcyclists. Grated bridge, polished concrete and temporary steel plates to cover construction holes come to mind first but I bet people can add a few more here. Situational awareness and experience go a long way towards not busting your azz out there. I once was pulling to a stop on the PCX when a simple flattened plastic cup caused the front wheel to slide like it was on ice. That took every brain cell I had to understand fast enough what the heck was going on.
- PCX150Rider
- Frequent Poster
- Posts: 1832
- Joined: Tue Jan 17, 2017 1:56 pm
- Year: 2017
- Color: White
- Location: Old Saybrook, CT
Re: Traveling Over Steel Grated Bridges
And don't forget those wet leaves in Autumn!
- Mel46
- Forum Benefactor
- Posts: 6959
- Joined: Tue Nov 13, 2012 5:13 pm
- Year: 2013
- Color: red PCX
- Location: Dallas, Ga USA
Re: Traveling Over Steel Grated Bridges
I lived in New Orleans once upon a time, and I had to ride my motorcycle over the Mississippi River Bridge quite a few times. It is a steel grated bridge, and it is quite long. During 5 o'clock traffic it is difficult to get any momentum while moving across the bridge, so I had to put my feet out on both sides and 'ease on down the road' (bridge). When the bridge was wet it was quite difficult to negotiate. Even my boot soles were wet by the time I was halfway across, which made traction difficult. They definitely did not have motorcycles in mind when they built that bridge.
Currently own:
Red 2013 Honda PCX150
Givi tall windshield & tailbox - Lots of extra lights
Custom seat from Thailand - Bad Boy Airhorn
Takegawa Lowering Shocks - Michelin City Grip Tires
Headlight assy upgraded to LEDs w/HS5 main bulbs
NCY variator, drive face, and rollers
Red 2013 Honda PCX150
Givi tall windshield & tailbox - Lots of extra lights
Custom seat from Thailand - Bad Boy Airhorn
Takegawa Lowering Shocks - Michelin City Grip Tires
Headlight assy upgraded to LEDs w/HS5 main bulbs
NCY variator, drive face, and rollers
- PCX150Rider
- Frequent Poster
- Posts: 1832
- Joined: Tue Jan 17, 2017 1:56 pm
- Year: 2017
- Color: White
- Location: Old Saybrook, CT
Re: Traveling Over Steel Grated Bridges
Reminds me of the old Newport Bridge in Rhode Island. That was a real gem to cross. . .even worse when it was windy. Fortunately I only had to cross it when I was out sightseeing.When the bridge was wet it was quite difficult to negotiate. Even my boot soles were wet by the time I was halfway across, which made traction difficult. They definitely did not have motorcycles in mind when they built that bridge.
- WhiteNoise
- Official Moderator
- Posts: 8784
- Joined: Mon Nov 07, 2011 11:15 pm
- Year: 2015 PCX 150esp
- Color: Pearl *White*
- Location: L.I. N.Y.
Re: Traveling Over Steel Grated Bridges
And Paint! Wet or dry.PCX150Rider wrote:And don't forget those wet leaves in Autumn!
I've been wanting to ride over to Jones Beach but it's grated bridge is narrow and runs one way on each side.
You drift in your car. Can't imagine my ircs on it. One day I suppose.
Location, Year & Color - Please enter Yours today!
How? Log in. Click the User Control Panel button (top right of any page). Upon destination, click Profile in left column. Look >See the questions? Please Complete. We Thank You
How? Log in. Click the User Control Panel button (top right of any page). Upon destination, click Profile in left column. Look >See the questions? Please Complete. We Thank You
- you you
- What's a wot?
- Posts: 10000
- Joined: Sat Jun 30, 2012 5:37 pm
- Location: Between Lulu and Chichi
Re: Traveling Over Steel Grated Bridges
Paint is generally fine in the dry isn't it?
- PCX150Rider
- Frequent Poster
- Posts: 1832
- Joined: Tue Jan 17, 2017 1:56 pm
- Year: 2017
- Color: White
- Location: Old Saybrook, CT
Re: Traveling Over Steel Grated Bridges
From my experience paint in the dry isn't generally fine. Under the right circumstances it can be quite slippery. . .especially approaching at a downhill elevation change on a banked turn (like for a cross-walk or at an intersection). Plus that crack filler some municipalities use on asphalt can be slippery wet or dry as well.Paint is generally fine in the dry isn't it?
Just had a news report tonight that in my area some contractor(s) or evil doer dropped over 2000 screws (different varieties) over a stretch of popular road between two towns. Somebody made it a personal effort to pick up as many as they could find (spot) and sort them out. Local repair shops have already reported people coming in with tire punctures. It's a great biking road and now I've got to avoid that stretch for the summer until things get straightened out.
Not sure if you can get it on your PC or not but here is a link to the local TV station story.
http://wtnh.com/2017/06/02/screws-causi ... -higganum/
As George Carlin would say, "AAhhh. . .It's always somethin".
- WhiteNoise
- Official Moderator
- Posts: 8784
- Joined: Mon Nov 07, 2011 11:15 pm
- Year: 2015 PCX 150esp
- Color: Pearl *White*
- Location: L.I. N.Y.
Re: Traveling Over Steel Grated Bridges
Just when you think you've heard it all...Bam! Now that's definitely stuff to avoid! A blanket of nails. I can't imagine coming up on all that. I applaud the individual who took the time to gather and remove them. Very nice indeed. "If" the spillage was intentional, that's a damn shame and "If" caught he or she should pay for every tire damaged with a New tire. Now tell me, does that hurt?
I hope avoiding the area doesn't put you too far out of the way for too long PCX150Rider. Bummer
I hope avoiding the area doesn't put you too far out of the way for too long PCX150Rider. Bummer
Location, Year & Color - Please enter Yours today!
How? Log in. Click the User Control Panel button (top right of any page). Upon destination, click Profile in left column. Look >See the questions? Please Complete. We Thank You
How? Log in. Click the User Control Panel button (top right of any page). Upon destination, click Profile in left column. Look >See the questions? Please Complete. We Thank You
- easyrider
- Frequent Poster
- Posts: 1597
- Joined: Sat Dec 19, 2015 6:23 pm
- Year: 2013
- Color: blk
- Location: Long Island , NY, Tampa, Ft laud
Re: Traveling Over Steel Grated Bridges
Had a situation along I 95 where a barrel of roofing nails fell off the back of a roofing truck.. Cars along the shoulder for miles.. Major mess.