The Honda PCX / Forza / ADV150 / SH Forums

:Good hearing Dave............Hope you and the Forza keep on keeping on.

https://www.hondapcx.org/viewtopic.php? ... nt#p137558

This may work??

Good one.........Could you share what the length of that strut is? Thanks

Wondering...........does the image stabilization work well.......maybe, post a video ?? Thanks.

Noticed a slow leak in my front tire [about 2 lbs a day] Knew I had hit a pothole recently, Hmm.......took longer than it should have to discover where the leak was. Took a large C clamp and [tire deflated] had a look and see. Was expecting damage to the bead but appeared to be some organic debris t...

Intermittent problems suck. [been there] May be the pump?? Before taking it out, see if you can find the wires that go to it and hot wire it with + and - source. If it doesn't make noise,you've found the problem. Might be a good idea to check the fuel pump fuse.... in particular, and make sure there...

Think you're on the right track.............open up and have a look at the variator /slides/rollers.

Have you tried to duplicate the symptoms while on the center stand? You can check [run] it with the trans cover off also. Good luck.

Agree the valve adjustments last a good while. The possible culprit may b the trans [variator/ramp plate/rollers] It's kind of early for
something like that to go amiss but it's worth a check. If you bought it used, previous owner may have tinkered with those parts??

Had a similar experience.......except my plug was hard to remove. Must not have installed it properly?? Carbon built up on the threads. Figure to leave the new plug in there till it "acts up".. It may take some pb blaster and patience next time. Hoping it lasts another 30k. Important to fo...

Here is a link for an inexpensive home made clutch/variator tool............https://www.youtube.com/watch?v=YIVAimvORFI
Sorry.........can't help with valve adjustment but if you google 2012/2013 PCX valve adjustment .......you should get many hits.

Good Job.!............Thanks for the comeback...........might help someone else.

Some times the tire isn't "beaded" properly. There should be a line around the circumference of the tire, about an 1/8 inch from the rim. Make sure that it is a consistent distance from the the wheel, all the way around. [Check both sides]. If the line varies you'll need to reseat the tire...

Don't know if the 2016 Forza was post fuel pump recall. Mine [2014] was bought used and hadn't yet been replaced. Hope your prior experience bodes well for finding the problem and maybe someone else will chime in with help. There is a website where you can enter the VIN # to find out about any recal...

Spacers are Fine...........A bit of touch up paint or maybe even the sharpie?? {You'll be the only one who notices probably] : ) Congratulations!

The key to tire removal/install is lube. Wherever the trouble is........likely not lubed in that area. Also helps if the tire is warmed. Sometimes the lube dries before you expect, so keep it near by. Agree..........the videos make it look so easy.......Maybe they cut out the blooper section! : ) I ...

It's simpler than the rear wheel. As you said .......protect the brake [a spacer/wedge between the pads, once the wheel is removed helps] No need to remove the caliper but..... it helps to open the space between the pads a bit.......before reinstalling the wheel......Maybe someone else has a video l...

Back [no pun] in the day, Riders wore a wide leather belt to relieve that problem. Maybe more useful on longer rides.
https://www.amazon.com/motorcycle-back- ... back+brace

Since the valve settings are correct, don't think I'd be worried.

Great! You shouldn't need to do them for a long time/miles ......unless you prefer doing them "by the book" I have a theory that sometimes they aren't set "perfectly" at the factory [assembly line] Thus, why some find them out of adjustment on the first inspection. The person tha...