The Honda PCX / Forza / ADV150 / SH Forums

https://www.hondapcx.org/viewtopic.php?t=4373 A big job. Might be easier to see if you are using all the CVT pulley first and address that. There are after-market drive faces that are slightly larger. 120mm vs stock 117mm. Which will give you a bit more. Do you have a tach.? So you know if the engi...

As you mentioned 157cc I assume this is a PCX160 with 15.8hp. Theoretically from my aerodynamics formula and results on 125/150 you should be good for about 79 mph. (revs allowing). This is with J.Costa (ie. tuned variator|) and a freer flowing exhaust. NB. J Costa has a 13 deg pulley angle. vs. st...

Does anyone know the "sweetspot" for the new 4 valve engine? the 157cc KF47 lowest roller weight without loosing top speed? Also stock size? dimensions and gram weight?

Hello! is this guide accurate for the current generation PCX? will it also work with the 2022 Honda PCX 157cc 4 valve engine? I consider myself moderately inclined, mechanically speaking. I wouldn't consider myself "engineer" so gear ratio arithmetic is out of the question. I can however t...

https://www.hondapcx.org/viewtopic.php?t=4373 A big job. Might be easier to see if you are using all the CVT pulley first and address that. There are after-market drive faces that are slightly larger. 120mm vs stock 117mm. Which will give you a bit more. Do you have a tach.? So you know if the engi...

Hello, I'm interested in learning how to understand the final drive gear affects top end. Most videos on the 157cc PCX aren't in english and I am confused if lower tooth count equals more top-end at the sacrifice of acceleration which would be made up for by lower roller weights(20x15 right?) Or is ...