The Honda PCX / Forza / ADV150 / SH Forums

87112 wrote:Try almost 2 months without a single completely sunny day.

Wait its happening right now in lame ass Seattle.

You would be right at home here in the UK

Hi Stripped both sets of brakes down today, greased sliders as Honda seemed to have run out of spit ;) cleaned everything up and rear pads have about the same as the front thickness wise 2.5mm maybe a tad more. Front pads had no shims on pads and rear only had a shim on the piston side, I would thin...

Thanks I will take them off again tomm and clean them up, do you know the oem thickness, see how we go, I thought they were well worn.

Found the pads for just under £30 ha to search for the Forza 125 ones like GN2 suggested (thanks), it look to have about 2-2.5mm left?

Hi, So today i checked the front brakes a no suprise they were down to the marker, pin felt seized as it didnt want to come off, the disapointment continues with this machine, not even looked at the rear brake yet, EBC sintered pads come in at £50 on Ebay more elsewhere only £20 less than Honda. May...

Hi While still debating what to change the Forza for i thought i would sort out its faults, exhaust was first, quick sand and a few coats of PJ1 on the weld seams, sorted. Onto the shudder, removed the casing and found the internals absolutely caked with black dust from the belt i assume, it was eve...

Hi,
Does anyone know if the brake pads on the 2019 Forza 300 are the same as the earlier model, mine seem low so i will check them tomm, but i dont fancy paying £70 for a set, was going to use EBC sintered if they are the same, EBC have not replied to my query.
Thanks
Mark

Hi, So while I continue to look for a new bike I thought I would sort out a few of the faults with my Forza, I started with the bit of exhaust rust staring, a quick sand and clean with thinners and a few coats of PJ1 paint seems to have sorted that one, now onto my judder. I removed the casing and i...

Hi, Well I had high hopes for my scoot but my roads I commute on are usually wet or have mud from farmers fields on them maybe it was the the shit from the fields thats caused the problems?, its all polished up in the garage now till it goes or around March and actually looks good, I thought my CB50...

Happy new year to everyone, Just thought I would put my own experience with the Forza 300 to this point, the bike is very good at what it was designed for however its quality is not what ive expected from Honda, first up my wing mirrors worked slightly loose so that you could not see much behind you...

great, I take it the nut sizes are 14mm 17mm and 41mm?.

nice one, thanks, 18ftlbs for casing bolts, wouldn't have thought that being so small

halluinoid wrote:bearing in mind I have never seen this door open yet...... while gently prying the door up? from which side ?

Press the fuel flap button and at the same time press the plastic behind the hinge of the flap, it will open a few times then stop again.

Hi, I have a Forza 300 2019 and its started shuddering with less than 5k on it, its now put away for the winter and I wanted to clean it all out inside as I assume its the belt dust from riding like a granny, would anyone know the torque settings for the clutch,variator nut and the big 41mm one and ...