The Honda PCX / Forza / ADV150 / SH Forums

hello good ones. I had to use a smaller belt, and the rollers that came with my kit didn't work for me. They rotated too much and forced the bike to easily reach the speed limit. I'm using the Polini blue contrast spring, 13.5g rollers and instead of the Malossi variator I started using the Yuminash...

Hi all, I'm from Portugal , Seixal , Setúbal. . PCX 2011 kit 163cc yuminashi... Powerfull

Conelite wrote: ↑Fri Mar 22, 2024 1:58 pm

power-full wrote: ↑Fri Mar 22, 2024 4:37 am I leave here some photos... of my PCX... if you have any questions.

https://photos.app.goo.gl/h4YhcftyLF8Ni5aY9

Is that 130km/h on a big bore or stock bore?

170cc type b

I leave here some photos... of my PCX... if you have any questions.

https://photos.app.goo.gl/h4YhcftyLF8Ni5aY9

I always got along very well with 13.5 gr... even on the Malossi variator.. on the Yuminashi variator I get along very well with 8.5.gr, but this has a lot to do with the gearbox (the gears) and with the spring too, with the type of belt.. I use one from Gates, it's much smaller than the original......

Nnzrr wrote: ↑Mon Sep 19, 2022 9:38 am sir, how do you held H4 bulb on HS5 base, any tutorial?

I have some photos.. what I did was as the LED lamp doesn't heat up, I removed the lamp plate where the pins are and mounted the lamp like this.. I'll try to leave photos

I don't know in mph but in km mine passed the 110 thousand km barrier a few days ago, of which some 60 thousand km with the Yuminashi 164cc kit

I have the PCX from 2011 and I connected it to an existing plug below the pressure gauges, I connected the 12v LED kit, 35wx2 6000k, and the Oxford heated grips... I also have the 4 flashing button on this model connected to that same plug. I haven't had stress until today.

Try using 13 GR dr pully rollers. and you'll see what it's like to ride mine from 20111/ to 145kh. If you stretch, you'll get enough of that... the bad thing is that it only lasts a short time for the cost of the rollers.

I have a new kit at home... because my kit already has more than 59 thousand km on it... but before assembling it I'm going to have it rectified as I can already see that Yuminashi fails a lot in this part

Hello, this must have happened between two and one... either the final engine stopped working, or the cylinder is lower and caused the valves to hit the piston. Did you measure the squish? what are you using for an injector?

I don't think it was in transport. if you notice the tire on the left side of the bike, the tire is flaking which means that it has a few kilometers done like that already crooked...

Hello good day staff, the first 100km with the new kit yuminashi 164cc are made, must set the variator rollers, because I have a weak start, which translates to a lot of strength after the start after there dies a little and from 100kh wake to life again ...

Diablo superbike

Yesterday was such a weird day. belt had 2000km, all of a sudden on the highway it was like this... I'm back on the road but this time only with 120 kh... I'll have to buy some new parts from yuminashi. Any idea what part or parts failed and caused the problem with your variator? Did one of the rol...

GPS speed. Malossi neste end variador

hello good morning guys. I already have the new videos of the new kit assembled on my YouTube page. here is the last yesterday made just for walking I will have to adjust the weights of the variator https://youtube.com/shorts/f8TzqPll_jA?feature=share https://youtube.com/shorts/_U4cts3kxfk?feature=s...

32mm our best 34mm
My 34mm forza ...
https://youtube.com/shorts/_U4cts3kxfk?feature=share

32mm our best 35mm