The Honda PCX / Forza / ADV150 / SH Forums

Any photos from the board maybe?

like totomclub2005 wrote... Put yout PCX on the SIDE STAND and you will get perfect access to the plug. You can remove it with a Honda tools.

Very good job so far... keep us posted.

The level of the coolant is actually simple... Just keep it between the "low" and "high" marks, when the engine is cold. Even if you little (apr. 1cm) below the "low" mark it is no problem at all (the expansion tank is quite big). The more important question that I´m as...

If you decide to open the dashboard - PLEASE post some hi res photos of the board.

Probably none of the above. You want to replace LEDs because some of them are not working? I believe you will have to dismantle the dashboard and make some pictures / measurements of the LEDs so we can identify them.

The white is in my opinion the best color for the PCX... just beautiful !

Here we go... the PCX Hybrid goes in serial production! http://www.autocarpro.in/news-international/honda-launches-pcx-hybrid-scooter-indonesia-29193 Technical Specifications Engine: 149.3cc, four-cylinder, SOHC, PGM-Fi Transmission: Automatic, V-Matic Compression ratio: 10.6:1 Max power: 10.8 kW (1...

Yeah, what is the price of the new PCX 2018 model in UK?

"KINETIC, ELX1, Ebike" ... just look at all these names on the bike... SUCH A BAD FAKE!
And that rear wheel... omg... Honda would be ashamed to build something like this!

Ha ha... cool spot man!

However, such a fake. PCX never produces such a black smoke!

@mattpwyman

Can you make a video? Does the engine runs smooth on slightly higher revs on only on high revs?

How are these "custom changes" regulated in your country regarding the police, technical inspection and insurance (in case of ...)?
Is it allowed just to switch original halogen bulbs with custom made leds, even if they make front beam much more efficient and don´t blend other drivers?

Glad that you have the problem solved. :D ;) However, don´t be suprized if the knock sound returns after a while - that bearing adjustment is really tricky. Too loose and you have the movement (knock) when the fork is under tension, and if it is too tight, well... steering is not so smooth and proba...

Maybe you don´t have to replace the bearing (if that is the problem), maybe you just have to adjust/tighten it. In that case you only have to remove plastics above the tank. 1h job.

I had on my PCX similar "klick" sound when I used only front brake and stopping to standstill. The problem was a loose steering bearing (image - parts nr. 3 and 11). Grab the steering and the fork and try to move it forward/back while you have the bike on a center stand and someone siting ...

small update, new bearings are here , I just have to find some time to install them. At the end I chose the NTN bearings and I will replace them myself.

Hey homie, can you please send me the workshop manual? Thanks.

For some reason there is a HUGE difference between speedometer for pre LED model 2013 (around 146 USD on Partzilla) and for LED Modell PCX (price around 400 USD for the whole assembly).

I believe there are two final drive assemblies - one for older models and one for newer '15 onwards versions - best check on that before you order it (if you do) - again, partzilla will show you what is available upon bike/year selection. There is part number 23205-KWN-640 for pre LED model and als...