The Honda PCX / Forza / ADV150 / SH Forums

Hello PXC-in-japan San... It is a bit confusing, but on the 2015PCX there are three inner covers. The real COVER, INNER (81131-K35-V00) and an OUTER, R. INNER COVER (81138-K35-V00) and an OUTER, L. INNER COVER (81139-K35-V00). The later has to be removed first. They come out as reverse order, so le...

In my haste, I decided to try to take off both panels to access the combined brake master cylinder... and broke them both. I strongly suggest you do not follow the video I posted. For me, no worries, it's a 100,000 kilometre commuting machine, and as long as it is mechanically sound, I am not worrie...

Hello, all. Long time no see. A while back someone replied to me with info that I now need rather urgently. So I need to find the post in which I read the reply. Can you give me a hand doing that, please? Or... if you happen to be better with the search tool on the forum than I seem to be, and you c...

Just removed panel surrounding glove box as shown in the video. Broke two body colored tabs and one yellow one. Now searching for how to remove these panels "properly" as it were. Manual sends me all over the place, referring to one page then another and then back on itself. Saw a post her...

Hello, all. I have a 2015 / 150cc PCX which this week will do its 100,000th kilometre, or its 62,000th mile. I never scrimp on servicing costs, always buying genuine Honda parts. If you'd like to see the "likely" (or my idea of reasonable) maintenance over that time and distance, click the...

The clips are annoying. I think I broke the same one when doing valves recently. I plastic welded it back on, but I'm sure it will break again. You may not have mentioned grease on the weights, but I've seen people suggest this. I think it's best to use very little grease on the drive pulley area a...

It was the coil. Though I do my own routine maintenance, I do not a have pro's skill for problem analysis and am not skilled with electrics. Cost me 11,000 yen, about maybe 110 USD, including labour for a new one fitted. Less than expected. Though I have just spent 55,000 yen on a 100% parts refresh...

This post is helpful. But you don't need to remove the side panel You should be able to get a small socket wrench onto the three bolts on the CVT cover (the front one is the hardest) and from there continue as you show. It saves time and less chance of damage to side cover. I don't put grease on th...

Hi, all. Perhaps my searching technique is bad, but I cannot find any posts on this anywhere in the forum, though fork oil is mentioned in many posts. I have made a few tutorial PDFs and Google photo sets of jobs I have done, and once I get the basic process for this, I will try it and make another ...

Hi all, https://imgur.com/tMbl279 Here is a video of me pushing down on the front forks. Watch the lights on the right side. I've already changed to heavier 20W fork oil but the problem still remains. Could the springs be spoilt or something? Thanks all. Hi. Any chance you took photos of the work d...

]People turning left in front of you and not seeing you, accounts for almost 80% of all the accidents that bikes are involved in. In addition to the couple actions you noted above, I would add some fork lights to the front forks, easy to do, a lot of us here are using the Kawell light off Amazon .....

Left in with a pro mechanic this time.
Apparently it seems to be fuel tank related.
I see no one had any ideas about it thus far.
Will update as fully as possible when I get the bike.

There’s nothing you can do , it was just a bad stator, Yamaha’s had a few of those on the 2018 X max… Yeah, my 2017 Tmax 530 DX bought new in autumn 2018 and with only 2,000 kilometers on the clock does not start. Should never have traded in my 2013 V-strom with only 27,000 kilos on it and in perfe...

PCX-in-Japan, It looks like this thread may have some relevant info... https://www.hondapcx.org/viewtopic.php?p=149392#p149392 Ultimately, this guy replaced his stator and fixed a no noise/no start problem. Let us know what you find. Cheers dankly Thank you very much. Been too busy to check this si...

Hello, all. 1. Bike info. 2. Problem info. Please advise. Thank you. 1. 2015 PCX 150 (frame number KF18-1004***) with idle-stop function. 78,000 kilos / 49,000 miles. maintained frequently / spark plug (suspected problem is ignition) changed every 15-20 thou kilos / 10-14 thou miles. 2. Bike has bee...

you you wrote: ↑Sun May 15, 2022 5:10 pm Excellent write up.

Thank you.

ChuckD wrote: ↑Sun Jan 26, 2020 12:17 am pxc-in-japan,
Pretty incredible work on the documentation - thank you!
Chuck

Very welcome.

what are the torque specs of cvt? the variator and clutch nut? I tighten them all by hand without a torque wrench. I use a long socket wrench giving me plenty of leverage. In another thread recently I detailed how I had presumably not tightened the variator nut enough about 10,000 kilometres previo...

Superb right up. If only more people did this with the jobs they undertook. How's the bikes wheel bearings, head stock bearings and swing arm bearings holding up after that milage ? Just curious. Guessing the forks and shocks need a rebuild at that milage too As of summer 2022, I have replaced the ...

Mple Nter
For this job only Suzuki Super Grease Type A, a heat resistant grease that does not get runny when warm.