The Honda PCX / Forza / ADV150 / SH Forums

ive just installed an Akrapovic and with the 10gr rollers in the malossi multivar it was like setting off in 2nd gear, have just put in 8.5gr and its pulling at optimal revs again and i actually can feel a SMALL boost in mid range performance due to the exhaust upgrade. An exhaust is not worth the p...

basically the rear pulley https://www.google.com/search?sxsrf=ALeKk03D506Z0OOfRmSh6puDJNGaL-7taw%3A1592838065957&ei=scfwXpCCOsiD8gLVvaKIBg&q=malossi+torque+driver+forza+125&oq=malossi+torque+driver%3F&gs_lcp=CgZwc3ktYWIQARgAMgQIIxAnMgQIABAeMgQIABAeMgQIABAeMgQIABAeMgQIABAeMgQIABAeMgQI...

Hi, Just a trial, been using the recommended white since i bought the kit but just before lock down i installed 9.5gr malossi rollers so thought i'd test the yellow spring. still to test out of town but its pulling better low to mid end. So my Multivar and x belt just arrived and I'm waiting on my ...

Hi,
Just a trial, been using the recommended white since i bought the kit but just before lock down i installed 9.5gr malossi rollers so thought i'd test the yellow spring. still to test out of town but its pulling better low to mid end.

I agree to a certain extent Honda have done an excellent job with the forza, but Honda also tune this vehicle for fuel economy so there’s always room for better performance if your happy to lose a few mpg’s.

abcdarko wrote:In short, what you gained with all mods?
What is must do?

In short?.........changes it from fuel economy mode to sports mode

Hey guys, why is there so little performance parts for this model? I see parts for the 300 but not the 125.baffling. Just fill the variator housing with malossi products, i have on my 2019 and i'm not disappointed. I'm down to 94mpg but thats a small price to pay for the acceleration gains the part...

Just an update, tried the 11g dr pulleys but the clutch and belt slip was preventing a quick standing start so ive put some yellow malossi clutch springs and a +2000rpm white malossi contra spring in and it shoots off like a rocket. Now its gained an indicated top end of 3mph(was 82mph now 85mph) bu...

46k miles 2012/13 pcx just bought a forza but the pcx is engine sounds like its still ticking over like it did day 1

[/list]Just opened up the vari and found these 14gr what look to be dr pulley ROLLERS. I though stock were 18g on the 125. It did have 700 miles and 1 previous owner so maybe he changed them? O well in go the 11g dr pulley sliders from my pcx.

If so what weight is best? I know my 2013 pcx came with 18gr rollers same as stock forza 125. I’ll probably start by testing the 11.5g dr pulleys out of my pcx in the forza but it would be nice to know if anyone else knows any better..........?

Its still alive as well! Its had 2 radiators a cdi 2xdriven face(replaced due to common bearing issue) and only 1 honda service. The rest done by me and my halfords socket set. To top it off, it paid for itself just after its 1st year in public transport savings. What a machine. Might keep it and ha...

Just ordered a 2019 forza 125 the pcx has been decent for 5 years but there comes a time when we have to let go of our loved ones

A larger windshield will also help

or you could order a multivar kit from malossi aus, a bit more expensive than most aftermarket variator kits but does also comes with contra spring to help maintain higher revs. http://www.malossistore.com.au/en/products/VARIATOR-MULTIVAR-2000_5115552?M=150&MM=MO%2FHOPC150&FG=-1&Type=M F...

New contra spring as well as the rollers would help better on hills

i have had the same issue, check the wires that connect to the speed sensor, on my scoot it was one of the wires under the plastic protector behind the air box.

Hi all, Went down to get my PCX out for the morning commute today only to find I had a flat back tyre. Back home tonight for a proper look and I can clearly see what looks like a metal shard sticking out of the tread (see picture link below). http://i1262.photobucket.com/albums/ii608/drzoom11/Honda...

Sorry, Yes i mean erasing the memory codes. The speedo issue is not my main concern i will be fixing that on my next day off, my main concern was after i 1st tested and found 3 different fault codes, since posting this i have erased the memory codes because i since realized they may of been inherite...

Thanks for the suggestions guys, As my ecu was 2nd hand i have reset it using the paperclip method, have just done over 10 miles and and put into diagnostics mode and their is no faults to report as yet. Hopefully it will remain faultless, i think i'll get myself a service manual sorted sometime soo...