The Honda PCX / Forza / ADV150 / SH Forums

Andover! Just down the road from me in Winchester

Happy scooting fellow Brit

I thought the same about the strength of the plugs as when it broke it was tightened to spec in the owners manual, thus I didn't consider straight away to just try a flat head, but unscrewing was almost frightingly easy aha XD

Hi guys,

Update that I solved the problem!

I decided to see if I could get a flat head down the hole and gently twist it out....
Turns out I could!

Thanks for all the help everyone!

P.s Not part of the Roller-coaster society but looks fun!

Yes got ceramic out, that's great, actually at Thorpe park today XD, but will get on it tomorrow and update progress

In sadly

Ok going to have a go using this guide as it seems to have worked for a few people,

http://adrielmichaud.com/mr-fixit/how-t ... park-plug/

Got the ceramic out so there is no risk of it falling into engine now, time to work out a removal tool to use?

Ok guys I've screwed the pooch, Went to change spark plug all going well then just as I had it tight enough go to remove the tool and it all breaks off, What do I do now, can I attempt to cut the sides and remove with a flat head? Or do I need to bite the bullet and take it to a dealer to take it ap...

Cheers for that sounds simple enough, although I'm sure I will manage to complicate it aha

Ok awesome will put some honda blue type 2 on order then,

Cheers

Any help guys?

How much coolant is required to perform a flush,

I assume the procedure is to drain all out, then fill up to mark, start engine and run, then top up?

Should I go for a 1l bottle? Is this enough for my requirements?

Cheers

Tom

Hi all, Poor student with a pcx looking to service everything myself, I have gone through the 'owners manual' and done the following is there anything else I should do... At about 9000miles btw, Done: Oil change Front and rear brake pad checked Tyre pressure checked Brake fluid levels checked All li...

Looks like muffs it is, all the info about handguards seem to point to what you said ericpcx.

Cheers Mglutia will check them out

Depends what you are after to where but got these from France

Sounds good going to order these Acerbis handguards they claim they will fit any bike XD


http://www.dirtbikexpress.co.uk/graphic ... ds_-_black

Cheers

Tom

Hola, Here from sunny England the darkness is descending, I'm after some budget hand-guards for my pcx, I don't want muffs because I prefer the look of the guards aha, Managed last winter with just the gloves and I think guards would be a big difference my daily commute is half an hour in the mornin...

Few pics of the Bat-Bike almost complete now, just need a tunnel bag...

Yh sure, they were a French import http://www.ebay.co.uk/itm/120921109118? ... 1423.l2649